DOWNLOAD Sharp LC-19D1EWH (serv.man10) Service Manual ↓ Size: 1.2 MB | Pages: 32 in PDF or view online for FREE

When the Power of the TV is OFF (B indicator is off),
Press a on the TV.

• The B indicator on the TV changes to green.

When the TV is in Standby ( B indicator is Red),
Press B on the remote control unit.

• The B indicator on the TV changes from red to green.

• If you are not going to use this TV for a long period of

time, be sure to remove the AC cord from the power outlet.

• Weak electric power is still consumed even when a is

turned off.

• In DTV input mode, if the power is turned off immediately

after a setting change from the menu screen, the new
setting or channel information may not be memorised.

When the TV powers on for the first time after purchase,
the initial auto installation is invoked. You can
automatically set language, country and channels in
successive operations.

You do not need to do anything during the auto search.

• The initial auto installation functions only once. If the initial

auto installation is not completed, (ex: When menu screen
disappeared by not operating for a few minutes, when
the power shut down, etc.), try Auto Installation from the
Setup menu. (See page 12.)

• The initial auto installation stops by pressing RETURN.

Press B on the remote control unit.

• The TV enters standby mode and the image on the screen

disappears.

• The B indicator on the TV changes from green to red.

Press a on the TV.

• The B indicator on the TV turns off.
• When the TV is turned off by a, you cannot turn on the

power by pressing B on the remote control unit.

Off

Red

Green

Power off

The TV is in standby mode.

The TV is on.

The setup menu disappears and you can watch the
programme on channel 1.

Setting the on-screen display language

1 Press a/b/c/d to select the desired language

listed on the screen.

2 Press OK to enter the setting.

Setting the country or area

1 Press  a/b/c/d to select your country or area

listed on the screen.

2 Press OK to enter the setting.
• The programme auto search starts at the same time.

Digital Video Broadcasting is a transmission scheme.
It is much more than a simple replacement for existing
analogue television transmission. DVB provides more
stations, clearer picture quality and other services
displayed on the screen. It also allows a range of new
features and services including subtitles and multiple
audio tracks.

To watch DTV broadcasts, follow the procedures below
to scan all available services in your area.

Press DTV or b to access the DTV mode.

Press  DTV MENU and the DTV Menu screen
displays.

Press c/d to select “Installation”.

Press a/b to select “Auto Installation”, and then
press OK.

If you have already set the PIN, enter it here. If
not, enter the factory preset PIN “1234”.

• See page 14 for setting PIN.
• A confirmation message displays. To start the

search, select “Yes”.

The TV starts scanning all available DTV and radio
services in your area.

• The language and country settings used in this operation

are the settings you have already set while executing the
Initial auto installation (Analogue). If you want to
reconfigure the country setting, for instance after moving
to another country, conduct “Auto Installation” from the
Setup menu again.

• The services are stored according to the channel number

information embedded in the stream (if available). If the
information is not available, the services are stored
according to the order in which they were received.
If you would like to sort the order, it is possible to arrange
it as explained in page 20.

• To cancel the scan in progress, press END.
• You cannot select any DTV-related menu items unless

“Auto Installation” has been completed.

To view external source images, select the input source using b on the remote control unit or TV.

• The cables marked with * are commercially available items.

You can use the EXT 1 terminal when connecting a
VCR and other audiovisual equipment.

• When using SCART cable (EXT 1)

VIDEO

S-VIDEO

L-AUDIO-R

AV OUTPUT

SCART cable*

SCART cable*

You can use the EXT 1, 2, 3 or 4 (HDMI) terminals
when connecting to a DVD player and other
audiovisual equipment.

• When using component cable (EXT 3)

A game console, camcorder and some other
audiovisual equipment are conveniently connected
using the EXT 2 terminals.

• When using composite cable or S-video cable (EXT 2)

• EXT 2: The S-VIDEO terminal has priority over the VIDEO

terminals.

S-video cable*

Composite
video cable*

AUDIO cable*

YP

B

P

R

L-A

UDIO-R

COMPONENT

Component cable*

AUDIO cable*

HDMI-certified cable*

When using an HDMI-DVI conversion
adapter/cable, input the Audio signal
here.
Select “Analogue” in the “HDMI Audio
Select” of the Setup menu. (See page
15.)

• When connecting an HDMI-DVI conversion adapter/cable

to the HDMI terminal, the image may not come in clearly.

• When using HDMI cable (EXT 4)

SCART cable*

You can use the EXT 1 terminal when connecting a
decoder and other audiovisual equipment.

• In cases when the decoder needs to receive signal from

the TV, make sure to set “Decoder” to “EXT1” in the
Programme Setup “Manual Adjust” menu. (See page 13.)

• The PC input terminals are DDC1/2B-compatible.
• Refer to page 27 for a list of PC signals compatible with the TV.

Use the EXT 5 terminals to connect a PC.

ø 3.5 mm stereo minijack cable*

RGB cable*

RGB/DVI conversion cable*

ø 3.5 mm stereo minijack cable*

Picture

Contrast

OPC

DYNAMIC

[Off]

Brightness

Colour

Tint

Sharpness

Advanced

Reset

[  32]

[    0]

[  +4]

[    0]

[  +4]

–

–

–

+

+

+

Backlight

[+16]

–

+

●

1

Repeat steps 1 and 2 in Menu Operation: A.

2

Press  a/b to select the desired menu item
(Example: Backlight, Contrast, etc).

3

Press  c/d to adjust the item to your desired
position.

On(Display)

On

Off

Contrast

Brightness

Colour

Tint

Sharpness

[  32]

[    0]

[  +4]

[    0]

[  +4]

–

–

–

+

+

+

Backlight

[+16]

–

+

• Select “Reset” under each MENU and for each Mode to

reset all adjustment items to the factory preset values.

• Press MENU or END to exit Menu. Press RETURN to return

to the previous display.

●

1

Press MENU and the MENU screen displays.

2

Press c/d to select the desired menu.

3

Press a/b to select the desired menu item, and
then press OK (Example: OPC, etc).

The following are three examples of basic menu operations. Please operate the menu by using the following
three patterns as a reference.

●

1

Repeat steps 1 and 2 in Menu Operation: A.

2

Press a/b to select the desired menu item, and
then press OK (Example: Advanced, etc).

3

Press a/b to select the desired menu item, and
then press OK (Example: Colour Temp., Film
Mode,  etc).

Colour Temp.

C. M. S.-Value

C. M. S.-Saturation

C. M. S.-Hue

Film Mode

3D - Y/C

Monochrome

I/P Setting

High

Mid-High

Middle

Mid-Low

Low

4

Press a/b(c/d) to select or adjust the desired
item, press OK if necessary.

4

Press  a/b(c/d) to select the desired item,
press OK if necessary (Example: OPC setting).

Adjust the picture of each AV MODE to your preference
with the following picture settings (DYNAMIC(FIXED)
cannot be adjusted).

Picture

Contrast

OPC

DYNAMIC

[Off]

Brightness

Colour

Tint

Sharpness

Advanced

Reset

[  32]

[    0]

[  +4]

[    0]

[  +4]

–

–

–

+

+

+

Backlight

[+16]

–

+

This TV provides various advanced functions for
optimising the picture quality.

DYNAMIC

C. M. S.-Hue

C. M. S.-Saturation

C. M. S.-Value

Colour Temp.

Film Mode

3D - Y/C

Monochrome

I/P Setting

R

Y

G

C

B

M

Reset

[    0]

[    0]

[    0]

[    0]

–

–

–

+

–

+

+

+

[    0]

–

+

[    0]

–

+

On(Display): Displays the OPC effect on the screen while

adjusting the brightness of the screen.

On: Automatically adjusts.
Off: The brightness is fixed at the value set in Backlight.

Automatically adjust the brightness of the screen.

• When set to “On”, the TV senses the surrounding light

and automatically adjusts the backlight brightness. Make
sure no object obstructs the OPC sensor, which could
affect its ability to sense surrounding light.

• The OPC indicator lights green when OPC is “On” or

“On(Display)”. “Backlight” cannot be adjusted during this
time.

• You can adjust the factory preset parameters given in

“STANDARD”, “MOVIE”, “GAME”, “PC” and “DYNAMIC”.
The parameters chosen affect each of the input sources.

• For Input Source “EXT5”, you can only select

“STANDARD”, “PC”, and “USER”.

• For the items marked with a *, Enhanced Picture Contrast

will activate when OPC is “Off”.
For the item marked with **, Enhanced Picture Contrast
always activate.

• Enhanced Picture Contrast technology detects the source

video characteristics and smoothly adjusts the screen
brightness accordingly, enabling deeper black levels.

*STANDARD: For a highly defined image in a normally

bright room

*MOVIE: For a movie

GAME: Lowers image brightness for easier viewing.
PC: For a PC (Available only when inputting RGB signal.
The HDMI input (EXT 4) is compatible with VGA.)
USER: Allows the user to customise settings as
desired. You can set the mode for each input source.

*DYNAMIC: For a clear-cut image emphasising high

contrast for sports viewing

**DYNAMIC(FIXED): For a clear-cut image emphasising

high contrast for sports viewing (The “Picture” and
“Audio” settings cannot be adjusted.)

AV Mode gives you several viewing options to choose
from to best match the surrounding environment of the
TV, which can vary due to factors like room brightness,
type of programme watched or the type of image input
from external equipment.

Press AV MODE.

• Current AV MODE displays.

AV Mode: DYNAMIC

c button

d button

The screen dims

The screen
brightens

For less contrast

For more contrast

For less brightness

For more
brightness

For less colour
intensity

For more colour
intensity

Skin tones
become purplish

For less sharpness

For more
sharpness

Skin tones
become greenish

Items marked * cannot be adjusted when PC Input
(including HDMI-PC Input (see page 1)) is selected.

• Item marked *1 cannot be adjusted when “EXT4” or “EXT5”

is selected in the INPUT SOURCE menu.

• Item marked *2 cannot be adjusted when PC input

(including HDMI-PC Input (see page 1)) is selected.

*1
*1
*2

*1

Press AV MODE again before the mode displayed
on the screen disappears.

• The mode changes as shown below.
• Selectable AV mode varies with the selected INPUT

SOURCE.