DOWNLOAD Sharp LC-19D1EWH (serv.man10) Service Manual ↓ Size: 1.2 MB | Pages: 32 in PDF or view online for FREE

Make sure that the volume is turned down before
using or connecting earphones and headphones.
Listen to audio at moderate levels. Excessive
sound pressure from earphones and headphones
can cause hearing loss.

b (Input Source) button

a Power button

MENU button

Antenna input terminal

(DVB-T 5V=/80mA)

EXT 2 terminals

i (e/f) (Volume
buttons)

P (r/s) (Channel
buttons)

OPC indicator

OPC sensor

B (Standby/On)
indicator

Remote control sensor

Headphone jack

RS-232C terminal

EXT 3 (Component)
terminals

EXT 4 (HDMI/AUDIO)
terminals

EXT 1 (RGB) terminal

EXT 5 terminals

AC INPUT terminal

• Use headphones with a stereo mini plug (Ø 3.5 mm).
• Be sure to unplug headphones from the jack when they

are not in use.

• The speakers do not output volume when headphones are

plugged in.

• You can set the volume to different levels for each input

source.

Round lock for Kensington

Security Standard slot

• Only if you use an active terrestrial antenna, select “On(5V)” under “Supply Voltage”. (See page 16.)

COMMON
INTERFACE
slot

Pr

Ps

ik
il

b

a
b

d

c

When the Power of the TV is OFF (B indicator is off),
Press a on the TV.

• The B indicator on the TV changes to green.

When the TV is in Standby ( B indicator is Red),
Press B on the remote control unit.

• The B indicator on the TV changes from red to green.

• If you are not going to use this TV for a long period of

time, be sure to remove the AC cord from the power outlet.

• Weak electric power is still consumed even when a is

turned off.

• In DTV input mode, if the power is turned off immediately

after a setting change from the menu screen, the new
setting or channel information may not be memorised.

When the TV powers on for the first time after purchase,
the initial auto installation is invoked. You can
automatically set language, country and channels in
successive operations.

You do not need to do anything during the auto search.

• The initial auto installation functions only once. If the initial

auto installation is not completed, (ex: When menu screen
disappeared by not operating for a few minutes, when
the power shut down, etc.), try Auto Installation from the
Setup menu. (See page 12.)

• The initial auto installation stops by pressing RETURN.

Press B on the remote control unit.

• The TV enters standby mode and the image on the screen

disappears.

• The B indicator on the TV changes from green to red.

Press a on the TV.

• The B indicator on the TV turns off.
• When the TV is turned off by a, you cannot turn on the

power by pressing B on the remote control unit.

Off

Red

Green

Power off

The TV is in standby mode.

The TV is on.

The setup menu disappears and you can watch the
programme on channel 1.

Setting the on-screen display language

1 Press a/b/c/d to select the desired language

listed on the screen.

2 Press OK to enter the setting.

Setting the country or area

1 Press  a/b/c/d to select your country or area

listed on the screen.

2 Press OK to enter the setting.
• The programme auto search starts at the same time.

Digital Video Broadcasting is a transmission scheme.
It is much more than a simple replacement for existing
analogue television transmission. DVB provides more
stations, clearer picture quality and other services
displayed on the screen. It also allows a range of new
features and services including subtitles and multiple
audio tracks.

To watch DTV broadcasts, follow the procedures below
to scan all available services in your area.

Press DTV or b to access the DTV mode.

Press  DTV MENU and the DTV Menu screen
displays.

Press c/d to select “Installation”.

Press a/b to select “Auto Installation”, and then
press OK.

If you have already set the PIN, enter it here. If
not, enter the factory preset PIN “1234”.

• See page 14 for setting PIN.
• A confirmation message displays. To start the

search, select “Yes”.

The TV starts scanning all available DTV and radio
services in your area.

• The language and country settings used in this operation

are the settings you have already set while executing the
Initial auto installation (Analogue). If you want to
reconfigure the country setting, for instance after moving
to another country, conduct “Auto Installation” from the
Setup menu again.

• The services are stored according to the channel number

information embedded in the stream (if available). If the
information is not available, the services are stored
according to the order in which they were received.
If you would like to sort the order, it is possible to arrange
it as explained in page 20.

• To cancel the scan in progress, press END.
• You cannot select any DTV-related menu items unless

“Auto Installation” has been completed.

To view external source images, select the input source using b on the remote control unit or TV.

• The cables marked with * are commercially available items.

You can use the EXT 1 terminal when connecting a
VCR and other audiovisual equipment.

• When using SCART cable (EXT 1)

VIDEO

S-VIDEO

L-AUDIO-R

AV OUTPUT

SCART cable*

SCART cable*

You can use the EXT 1, 2, 3 or 4 (HDMI) terminals
when connecting to a DVD player and other
audiovisual equipment.

• When using component cable (EXT 3)

A game console, camcorder and some other
audiovisual equipment are conveniently connected
using the EXT 2 terminals.

• When using composite cable or S-video cable (EXT 2)

• EXT 2: The S-VIDEO terminal has priority over the VIDEO

terminals.

S-video cable*

Composite
video cable*

AUDIO cable*

YP

B

P

R

L-A

UDIO-R

COMPONENT

Component cable*

AUDIO cable*

HDMI-certified cable*

When using an HDMI-DVI conversion
adapter/cable, input the Audio signal
here.
Select “Analogue” in the “HDMI Audio
Select” of the Setup menu. (See page
15.)

• When connecting an HDMI-DVI conversion adapter/cable

to the HDMI terminal, the image may not come in clearly.

• When using HDMI cable (EXT 4)

SCART cable*

You can use the EXT 1 terminal when connecting a
decoder and other audiovisual equipment.

• In cases when the decoder needs to receive signal from

the TV, make sure to set “Decoder” to “EXT1” in the
Programme Setup “Manual Adjust” menu. (See page 13.)

• The PC input terminals are DDC1/2B-compatible.
• Refer to page 27 for a list of PC signals compatible with the TV.

Use the EXT 5 terminals to connect a PC.

ø 3.5 mm stereo minijack cable*

RGB cable*

RGB/DVI conversion cable*

ø 3.5 mm stereo minijack cable*

Picture

Contrast

OPC

DYNAMIC

[Off]

Brightness

Colour

Tint

Sharpness

Advanced

Reset

[  32]

[    0]

[  +4]

[    0]

[  +4]

–

–

–

+

+

+

Backlight

[+16]

–

+

●

1

Repeat steps 1 and 2 in Menu Operation: A.

2

Press  a/b to select the desired menu item
(Example: Backlight, Contrast, etc).

3

Press  c/d to adjust the item to your desired
position.

On(Display)

On

Off

Contrast

Brightness

Colour

Tint

Sharpness

[  32]

[    0]

[  +4]

[    0]

[  +4]

–

–

–

+

+

+

Backlight

[+16]

–

+

• Select “Reset” under each MENU and for each Mode to

reset all adjustment items to the factory preset values.

• Press MENU or END to exit Menu. Press RETURN to return

to the previous display.

●

1

Press MENU and the MENU screen displays.

2

Press c/d to select the desired menu.

3

Press a/b to select the desired menu item, and
then press OK (Example: OPC, etc).

The following are three examples of basic menu operations. Please operate the menu by using the following
three patterns as a reference.

●

1

Repeat steps 1 and 2 in Menu Operation: A.

2

Press a/b to select the desired menu item, and
then press OK (Example: Advanced, etc).

3

Press a/b to select the desired menu item, and
then press OK (Example: Colour Temp., Film
Mode,  etc).

Colour Temp.

C. M. S.-Value

C. M. S.-Saturation

C. M. S.-Hue

Film Mode

3D - Y/C

Monochrome

I/P Setting

High

Mid-High

Middle

Mid-Low

Low

4

Press a/b(c/d) to select or adjust the desired
item, press OK if necessary.

4

Press  a/b(c/d) to select the desired item,
press OK if necessary (Example: OPC setting).