DOWNLOAD Sharp LC-19D1EWH (serv.man10) Service Manual ↓ Size: 1.2 MB | Pages: 32 in PDF or view online for FREE

Model
LC-19D1EWH (serv.man10)
Pages
32
Size
1.2 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
TV / LCD
File
lc-19d1ewh-sm10.pdf
Date

Sharp LC-19D1EWH (serv.man10) User Manual / Operation Manual ▷ View online

2
Important Safety Precautions
• Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the
product. Do not use liquid cleaners or aerosol cleaners.
• Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub,
swimming pool and in a wet basement.
• Do not place vases or any other water-filled containers on this product.
The water may spill onto the product causing fire or electric shock.
• Stand—Do not place the product on an unstable cart, stand, tripod or table. Doing so can
cause the product to fall, resulting in serious personal injuries as well as damage to the product.
Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with
the product. When mounting the product on a wall, be sure to follow the manufacturer’s
instructions. Use only the mounting hardware recommended by the manufacturer.
• When relocating the product placed on a cart, it must be moved with utmost care. Sudden
stops, excessive force and uneven floor surface can cause the product to fall from the cart.
• Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not
cover or block these vents and openings since insufficient ventilation can cause overheating
and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other
similar surface, since they can block ventilation openings. This product is not designed for built-
in installation; do not place the product in an enclosed place such as a bookcase or rack, unless
proper ventilation is provided or the manufacturer’s instructions are followed.
• The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or
impact applied. If the LCD panel is broken, be careful not to be injured by broken glass.
• Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and other heat-
generating products (including amplifiers).
• To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
• To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items.
• Do not display a still picture for a long time, as this could cause an afterimage to remain.
• There is power consumption always if main plug is connected.
• Servicing—Do not attempt to service the product yourself. Removing covers can expose you to
high voltage and other dangerous conditions. Request a qualified person to perform servicing.
The LCD panel is a very high technology product, giving you fine picture details.
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as
a fixed point of blue, green or red.
This is within product specifications and does not constitute a fault.
Precautions when transporting the TV
When moving the TV, it should always be carried by two people, using both hands, be careful not to apply
pressure to the display.
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-
free operation of your product, please read the Important Safety Precautions carefully before using this product.
Dear SHARP customer
Supplied accessories
Remote control unit (g1)
Pages 4 and 5
• “AA” size battery (g2)...........Page 4
Product shape varies in some countries.
Stand unit (g1)
Page 3
Cable clamp (g1)
Page 3
AC cord (g1)
Page 3
• Operation manual (This publication)
3
Quick guide
Attaching the stand
Before attaching (or detaching) stand, unplug the AC cord from the AC INPUT terminal.
1
Confirm the 3 screws supplied with the TV.
Screws (m3)
(used in step 3)
2
Insert the stand into the opening on the bottom of
the TV. (1)
3
Insert and tighten the 3 screws on the bottom of
the TV as shown. (2)
NOTE
• To detach the stand, perform the above steps in reverse order.
Before performing work spread cushioning over the base area to lay the TV on, making sure the
area is completely flat. This will prevent it from being damaged.
Alignment protrusions
Soft cushion
Screw
Hex key
Setting the TV
Standard DIN45325 plug
(IEC 169-2)
75-ohm coaxial cable
Antenna
Connect the antenna cable from your antenna-/cable socket or the (room-/roof) antenna for antenna input terminal on
the back of your TV set to receive digitally/terrestrially broadcast stations.
An indoor antenna can also be used under good reception conditions. Passive and active room antennas are offered
commercially. In an active antenna its power is supplied via the antenna input terminal.
The supply voltage (5V) must be correspondingly set under “Supply Voltage”. (Page 16)
* Ferrite Core
The Ferrite Core should be permanently attached and never removed from the AC cord.
The AC cord is supplied either with a ferrite core or without a ferrite core. Neither type causes unnecessary electrical
wave emissions or interference.
AC cord
Place the TV close to the AC
outlet, and keep the power plug
within reach.
Cable clamp
Ferrite Core*
Product shape varies in some
countries.
4
Quick guide
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
leakage in old batteries.
• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any
chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
1
Hold in the tab on the battery cover and pull the
cover towards the direction of the arrow.
2
Insert two supplied “AA” size batteries.
• Place batteries with their terminals corresponding
to the (e) and (f) indications in the battery
compartment.
3
Insert the smaller tab of the battery cover into the
opening (1), and press down on the cover until
it clicks in place (2).
Inserting the batteries
Before using the TV for the first time, insert two “AA” size batteries (supplied). When the batteries become
depleted and the remote control unit fails to operate, replace the batteries with new “AA” size batteries.
Using the remote control unit
Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote
control unit and sensor may prevent proper operation.
Cautions regarding the remote control unit
• Do not expose the remote control unit to shock.
In addition, do not expose the remote control unit to liquids, and do not
place in an area with high humidity.
• Do not install or place the remote control unit under direct sunlight. The
heat may cause deformation of the unit.
• The remote control unit may not work properly if the remote control sensor
of the TV is under direct sunlight or strong lighting. In such case, change
the angle of the lighting or TV, or operate the remote control unit closer to
the remote control sensor.
30
°
30
°
Remote control sensor
5 m
5
Remote control unit
Quick guide
Selectable items
NICAM STEREO, MONO
NICAM CH A, NICAM CH B,
NICAM CH AB, MONO
NICAM MONO, MONO
Signal
Stereo
Bilingual
Monaural
Selectable items
STEREO, MONO
CH A, CH B, CH AB
MONO
Signal
Stereo
Bilingual
Monaural
• Using K on the remote control unit
DTV mode:
Press K to open the multi audio screen. (See page 24.)
Analogue TV  mode:
Each time you press K, the mode switches as illustrated in the following
tables.
* The volume can be individually set for the speaker and headphones output for
each input (TV, DTV, EXT 1, EXT 2, EXT 3, EXT 4, EXT 5).
1
2
3
4
5
6
7
8
9
10
11
12
13
14
16
15
17
19
18
20
21
22
23
24
25
26
27
28
29
30
1
B (Standby/On)
Enter standby mode or turn on the
power.
2
p (Display information)
(See pages 23 and 24.)
3
DTV MENU
DTV: Display DTV Menu screen.
4
0–9
Set the channel in TV mode.
Set the page in Teletext mode.
5
A (Flashback)
Press to return to the previous
selected channel or external input
mode.
6
DTV
Press to access DTV mode while
watching other input sources, and
vice versa.
7
 (WIDE MODE)
Select the wide mode. (See page
17.)
8
Z (Freeze)
Freeze a motion picture on the
screen.
9
a/b/c/d (Cursor)
Select a desired item on the
setting screen.
OK
Execute a command within the
menu screen.
TV/DTV: Display the programme
list. (See pages 17 and 24.)
10
END
Exit the menu screen.
11
EPG
DTV: To display EPG (Electronic
Programme Guide) screen.
(See page 23.)
12
(Teletext)
Select the TELETEXT mode. (See
pages 18 and 24.)
DTV: Select DTV data
broadcasting and TELETEXT.
13
ESG
DTV: To display ESG (Electronic
Service Guide) screen. (See page
23.)
16
AV MODE
Select an audio and video setting.
(See page 10.)
17
e (Mute)
Switch the sound on and off.
18
K (Sound mode)
Select the sound multiplex mode.
(See below.)
19
(k/l) (Volume)*
i (k) Increase the volume.
i (l) Decrease the volume.
20
P (r/s)
TV/DTV: Select the channel.
External: Switch to TV or DTV
input mode.
Teletext: Move to the next/previous
page.
21
b
 (INPUT SOURCE)
Select an input source.
(See pages 8 and 9.)
22
RADIO
DTV: Switch between RADIO and
DTV mode.
• Due to the large variation in
transmitted volume levels in
RADIO mode, some stations
will produce distortion if the
volume level is set too high.
23
PC
Directly select the PC terminal as
an INPUT SOURCE.
24
MENU
Display the MENU screen.
25
RETURN
Return to the previous menu
screen.
26
Colour (Red/Green/Yellow/Blue)
TELETEXT: Select a page. (See
page 18.)
DTV: The coloured buttons are
used to select correspondingly to
the coloured items in the menu
screen.
27
[ (Subtitle for Teletext)
TV/External: To turn the subtitles
on and off.
DTV: Display the subtitle selection
screen. (See page 24.)
28
k (Reveal hidden Teletext)
(See page 18.)
29
(Top/Bottom/Full)
Switch the Teletext image to Top,
Bottom or Full.
30
1
 (Subpage)
(See page 18.)
When one of the 4 Nordic
countries (Sweden, Norway,
Finland, or Denmark) is
selected in the country setting
of Auto Installation, DTV
channels are 4 digits. When
another country is selected,
DTV channels are 3 digits.
14
3
 (Hold)
(See page 18.)
15
SLEEP
Set the sleep timer on (in units of
30 min. up to max. 2 hr. 30 min.)
and off.
NICAM TV broadcasts selection
A2 TV broadcasts selection
Page of 32
Display

Sharp LC-19D1EWH (serv.man10) User Manual / Operation Manual ▷ Download

  • DOWNLOAD Sharp LC-19D1EWH (serv.man10) Service Manual ↓ Size: 1.2 MB | Pages: 32 in PDF or view online for FREE
  • Here you can View online or download the User Manual / Operation Manual for the Sharp LC-19D1EWH (serv.man10) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp LC-19D1EWH (serv.man10) LCD. Information contained in Sharp LC-19D1EWH (serv.man10) User Manual / Operation Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.