DOWNLOAD Sharp LC-19D1EBK (serv.man4) Service Manual ↓ Size: 6.45 MB | Pages: 35 in PDF or view online for FREE

Model
LC-19D1EBK (serv.man4)
Pages
35
Size
6.45 MB
Type
PDF
Document
Service Manual
Brand
Device
TV / LCD / Adjustment Procedure
File
lc-19d1ebk-sm4.pdf
Date

Sharp LC-19D1EBK (serv.man4) Service Manual ▷ View online

LC-19D1E/S-BK/WH
3 – 9
18.Enter menu “Debug” 
→ “DOWNLOAD modules” and select the firmware.
19.After updating.
Then shut down “High Performance Embedded Workshop”, unplug 20PIN connector, and E8 firmware updating finish.
LC-19D1E/S-BK/WH
3 – 10
3.2. Main microprocessor software version upgrade
1. How to install
1) Create a folder to install the RC32C on the host PC. (Ex:  RC32C)
2) Copy all the files located in  RC32C folder on CD-ROM to the created folder on the host PC. (Ex.: copy e: rc32c *.* c: rc32c<Enter> e:  is
a drive name of CD-ROM.)
3) Connect the ROM writer to the host PC using USB cable. Please do not connect the ROM writer to the target system this time.
4) Windows plug and play function detects the USB device connection. The corresponding device driver will be installed automatically.
5) Cut off the connection between the ROM writer and the host PC (Plug off USB cable) after the installation of the USB driver has completed.
* If our PD products have executed using USB interface before, the PC will not perform the step (3) ~ (5).
<< Installation of USB device driver>>
When the USB device is detected by Windows plug and play function, the install wizard will start up. Please follow the procedures below to install
the USB device driver.
i)
Connect the host PC to the flash ROM writer via USB cable.
ii) The dialog box will appear as below.
Follow the wizards, and the dialog box will appear for specifying setup information file (inf file). Please select musbdrv.inf located in the folder to be
installed (Ex.: C: RC32C).
NOTE: • The supported OS of the host PC are Windows 98, Windows Me and Windows 2000/XP. The RC32C cannot be used on other OS.
• The power to the flash ROM writer is supplied from the host PC.
• The RC32C is compliant with USB standard 1.1.
• Connection with USB-hub is not supported.
• Appropriate device driver can be installed using wizard by connecting the host PC to the flash ROM writer via USB cable.
• For Windows 2000/XP, please execute the installation from the administrator account.
• During the installation, error message that the device driver musbdrv.sys has not been found might appear. In this case, select musb-
drv.sys stored in the same directory as musbdrv.inf file.
LC-19D1E/S-BK/WH
3 – 11
2. RC32C startup
1) Connect the LCD’s 20pin port which near FXT5 to the ROM writer using SDI interface cable, which comes with the RC32C.
2) Plug AC on, make sure power indicator on.
3) Connect the flash ROM writer to the host PC via USB cable.
4) Execute “RC32C.exe” located in the folder to be installed. (The illustration below is the screen after the execution.)
5) To end RC32C, click "x" on the right corner of the window.
(It is not possible to end RC32C during writing.)
NOTE: • Please turn the power on of the target system before connecting USB cable to the flash ROM writer.
3. How to use RC32C
1) Select FTD file <Please use the same FTD file as PD308.>
(1) Start RC32C (The following illustration is the startup screen.)
LC-19D1E/S-BK/WH
3 – 12
(2) Click "Select" to specify FTD file.
(3) Select FTD file for flash ROM rewrite, and then click "Open".
FTD file
select key
Click
Page of 35
Display

Click on the first or last page to see other LC-19D1EBK (serv.man4) service manuals if exist.