Sharp LC-17SH1E (serv.man8) Service Manual / Technical Bulletin ▷ View online
LCD 2005 08 02
Date of Issue: 26
th
August 2005
Classification:
White
LCD TELEVISION TECHNICAL BULLETIN
Page 1 of 1
Sharp Electronics (UK) Limited
Reference - T3132A and T3132B
Revision - 1
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
Red – Carry out on all units
MODEL
LC17SH1E
SYMPTOM Unit continues to loop in the Auto Set Up mode.
CAUSE
Software corruption.
ACTION
If this problem occurs carry out the following to exit the Auto Set Up mode:
1. Press the Menu button once to stop the auto tuning
2. Remove the SCART cable.
3. Check that the unit is in the TV mode.
4. Turn the power off.
5. Wait a few minutes
6. Turn the power back on.
7. Re-start the Auto Set up.
2. Remove the SCART cable.
3. Check that the unit is in the TV mode.
4. Turn the power off.
5. Wait a few minutes
6. Turn the power back on.
7. Re-start the Auto Set up.
To permanently cure the problem, replace IC104 (located on the scaler PWB), using
the part number given below.
the part number given below.
REF NO
DESCRIPTION
PART NUMBER
PRICE CODE
IC104
IC, Memory
9JDS3U401DE02
AH
Display