DOWNLOAD Sharp LC-15S1E (serv.man28) Service Manual ↓ Size: 3.9 MB | Pages: 47 in PDF or view online for FREE

■ Cleaning—Unplug the power cord from the AC outlet before cleaning the

product. Use a damp cloth to clean the product. Do not use liquid cleaners or
aerosol cleaners.

■ Water and moisture—Do not use the product near water, such as bathtub,

washbasin, kitchen sink and laundry tub, swimming pool and in a wet base-
ment.

■ Stand—Do not place the product on an unstable cart, stand, tripod or

table. Placing the product on an unstable base can cause the product to
fall, resulting in serious personal injuries as well as damage to the product.
Use only a cart, stand, tripod, bracket or table recommended by the
manufacturer or sold with the product. When mounting the product on a
wall, be sure to follow the manufacturer’s instructions. Use only the
mounting hardware recommended by the manufacturer.

■ When relocating the product placed on a cart, it must be moved with

utmost care. Sudden stops, excessive force and uneven floor surface can
cause the product to fall from the cart.

■ Ventilation—The vents and other openings in the cabinet are designed for

ventilation. Do not cover or block these vents and openings since insufficient
ventilation can cause overheating and/or shorten the life of the product. Do not
place the product on a bed, sofa, rug or other similar surface, since they can
block ventilation openings. This product is not designed for built-in installation; do
not place the product in an enclosed place such as a bookcase or rack, unless
proper ventilation is provided or the manufacturer’s instructions are followed.

■ The LCD panel used in this product is made of glass. Therefore, it can break

when the product is dropped or applied with impact. Be careful not to be
injured by broken glass pieces in case the LCD panel breaks.

■ Heat sources—Keep the product away from heat sources such as radiators,

heaters, stoves and other heat-generating products (including amplifiers).

■ To prevent fire, never place any type of candle or naked flames on the top or

near the TV set.

■ To prevent fire or shock hazard, do not expose this product to dripping or

splashing. No objects filled with liquids, such as vases, should be placed on
the product.

The LCD panel is a very high technology product with 921,600 thin film transistors, giving you fine picture details.
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red.
Please note that this does not affect the performance of your product.

LC-13/15S1E(E)-01-10

03.7.17, 0:09 PM

3

Make sure the following accessories are provided with the product.

Operation manual (

×1)

Wireless remote control (

×1)

AC cord (

×1)

R-03 (“AAA” size, UM/SUM-4) dry battery (

×2)

AC adapter (

×1)

Cable clamp (

×1)

*Product shape varies in some countries.

LC-13/15S1E(E)-01-10

03.7.17, 0:10 PM

4

Before using the LCD TV set for the first time, install the two R-03 (“AAA” size, UM/SUM-4) batteries supplied in the remote
control. When the batteries become depleted and the remote control fails to operate, replace the batteries with new R-03
(“AAA” size, UM/SUM-4) batteries.

Open the battery cover.

Insert two R-03 (“AAA” size,
UM/SUM-4) batteries.

Replace the battery cover.

■ Position the positive and

negative ends of the
batteries as indicated in
the compartment.

■ Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.

• Place batteries with their terminals corresponding to the (+) and (–) indications.
• Different types of batteries have different characteristics. Do not mix batteries of different types.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause old

batteries to leak chemicals.

• Remove batteries as soon as they are depleted. Chemicals that leak from batteries can cause a rash. If chemical

leakage is found, wipe it off with a cloth.

• The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
• If the remote control is not to be used for an extended period of time, remove the batteries from the remote control.

■ Engaging the lower

claw with the remote
control, close the
cover.

■ Use the remote control by pointing it towards the remote sensor

window of the main unit. Objects between the remote control and
sensor window may prevent proper operation.

Cautions regarding use of remote control
■ Do not expose the remote control to shock. In addition, do not

expose the remote control to liquids, and do not place it in an area
with high humidity.

■ Do not install or place the remote control under direct sunlight. The

heat may cause deformation of the unit.

■ The remote control may not work properly if the remote sensor

window is under direct sunlight or strong lighting. In such a case,
change the angle of the lighting or main unit, or operate the remote
control closer to the remote sensor window.

■ Slide the cover while

pressing the (Y) part.

 

+

 

–

 

+

 

–

Headphone jack

OPC sensor indicator

POWER/STANDBY/
Remote sensor
indicator

OPC sensor

Remote sensor

LC-13/15S1E(E)-01-10

03.7.17, 0:10 PM

5

To enjoy a clearer picture, we recommend that you use an
outdoor antenna. The following is a brief explanation of the type
of connection that is used for coaxial cable:

If your outdoor antenna uses a 75-ohm coaxial cable,
change this for a new standard DIN45325 (IEC169-2) plug
and plug it into the antenna terminal at the back of TV set
via the antenna cable (not supplied).

A

• Always turn the X (MAIN POWER) switch of the LCD TV set to OFF when connecting the AC adapter.
• Unplug the AC adapter from the LCD TV set and power outlet when the LCD TV set is not to be used for a long period of time.

■ Plug the headphone mini-plug into the Headphone jack located on the front of the TV set.

A
• Headphones are not included in the supplied accessories.
• Even if a headphone mini-plug is connected to the Headphone jack, sound can be heard from the main unit speaker.

OK

Back

M

End

E

Headph.vol.       30

Please refer to page 15 to adjust the
sound volume.

Connect to the DC input terminal of the product.

To POWER INPUT

terminal

Plug into an AC outlet.

AC cord

AC adapter

* Product shape varies in some countries.

Household

power outlet

Push in the tabs to slide
open the cover.

X (MAIN POWER)

75-ohm coaxial cable (round cable)

To antenna input

terminal (

 )

Headphones

LC-13/15S1E(E)-01-10

03.7.17, 0:10 PM

6