Sharp LC-15L1E (serv.man17) User Manual / Operation Manual ▷ View online
15
Power
Viewing with the Internal Battery
See page 12 for how to remove the Table stand.
■ Installing the Battery
Open the cover of the battery
case.
case.
1
Remove the terminal cover of
the battery.
the battery.
2
Pack towards the left side first
and then push the battery
inside the compartment.
and then push the battery
inside the compartment.
3
Place on a soft cloth.
Cover of the
battery case
battery case
Terminal cover
Battery
Shift the battery to the right.
• The lever will return to its original
• The lever will return to its original
position.
• Move the battery to the right until
the lever returns completely.
4
Close the cover of the battery
case.
Align the tabs of the cover with
the corresponding grooves in the
TV and snap into position.
case.
Align the tabs of the cover with
the corresponding grooves in the
TV and snap into position.
5
With the lever pulled forward, lift up
on the battery while pushing to the
left.
• Always make sure to attach the
on the battery while pushing to the
left.
• Always make sure to attach the
terminal cover to the removed battery.
■ When Removing
Lever
Lever
■ Charging the Battery
Charge the battery when using for the first time. Plug the AC adapter into a wall outlet and the corresponding connector on the
TV. The charge indicator lights and charging begins. When charging is completed, the charge indicator turns off.
TV. The charge indicator lights and charging begins. When charging is completed, the charge indicator turns off.
AC adapter
TV main unit
Charge
indicator
indicator
AC wall outlet
* Product shape varies in some countries.
AC cord*
16
■ Charging the Battery (Continued)
Charging while Viewing:
You can watch the TV while charging is in progress by setting the “Battery charge” to “on” (page 29). In this case,
charging takes about 12 hours.
You can watch the TV while charging is in progress by setting the “Battery charge” to “on” (page 29). In this case,
charging takes about 12 hours.
Note:
Note:
• Charging time may be longer depending on ambient temperature, battery condition and other factors. Check to make sure the charge
indicator is not lit before using.
General Reference for Battery Viewing Time
The viewing time differs according to the “Brightness”
setting (page 28).
The viewing time differs according to the “Brightness”
setting (page 28).
Note:
Note:
• Operating time may be shorter depending on certain conditions such as use
in cold climates.
When You Want to Check the Amount of Remaining Battery
Power
Power
Press the Cyan button on the remote control.
• Although the remaining battery power indicator will flash red for
the first 10 seconds, it will remain lit constantly after that time.
• The amount of remaining charge is only displayed when
operating on battery power.
• The remaining battery power indicator changes according to
battery status, temperature and conditions of use. This indicator
should be used as a reference for the amount of battery power
should be used as a reference for the amount of battery power
remaining.
When Battery is not Charging Properly
• If the charge indicator begins to flash extremely rapidly during charging, this means that charging is not proceeding
normally.
• When the charge indicator flashes at an interval of about a second during charging, the TV main unit is not in an
appropriate temperature range for charging. The temperature range for charging should be approximately between 10°C
(50°F) and 30°C (86°F).
(50°F) and 30°C (86°F).
• If the charge indicator begins to flash extremely rapidly (at about 3 flashes a second) during charging, this means that
charging is not proceeding normally because the battery may malfunction. Replace the battery with the new one.
Power (Continued)
Brightness Setting
bright
medium
dark
Viewing Time
about 1.5 hours
about 2 hours
about 3 hours
The remaining battery power indicator
changes as shown below when the battery
level becomes low.
changes as shown below when the battery
level becomes low.
(Green)
(Green)
(Red)
The remaining battery power indicator is
displayed constantly regardless of whether
the on-screen display is on or off when the
battery level is low.
displayed constantly regardless of whether
the on-screen display is on or off when the
battery level is low.
Remaining
battery
power
indicator
battery
power
indicator
Viewing with a Home AC Wall Outlet
Plug the AC adapter of the Wireless Centre and AC adapter of the TV main unit into an AC wall outlet.
• Check to make sure that the proper voltages indicated on the products are being used when plugging the AC adapters into
their respective DC terminals.
• If there is a Sharp product close to the video controller, the product may malfunction during transmission of the video controller.
■ Using the AC Adapter
• Although the AC adapters may become warm during use, this is not a malfunction.
• Do not wrap or cover the AC adapters with a blanket or similar covering. This can cause a malfunction or accident.
• Do not attempt to disassemble or modify the AC adapters. The insides of the AC adapter contain high-voltage components
• Do not wrap or cover the AC adapters with a blanket or similar covering. This can cause a malfunction or accident.
• Do not attempt to disassemble or modify the AC adapters. The insides of the AC adapter contain high-voltage components
that can result in the risk of electrical shock.
* Product shape varies in some countries.
AC wall
outlet
AC adapter
AC cord*
TV main unit
AC wall
outlet
AC adapter
AC cord*
IR
MOUSE
POWER
INPUT
DC12V
FACTORY
SETTING
Wireless
Centre
17
Basic Operation
Turning the Main Power on and off
Switching the TV/VIDEO (AV1/AV2/AV3/AV4/TV) Mode
Turn on the power of the connected
video equipment.
video equipment.
Press TV/VIDEO to select the applicable
input source. The screen displays AV1,
AV2, AV3, AV4 or TV mode each time
TV/VIDEO is pressed.
• You can also use TV/VIDEO of the TV
input source. The screen displays AV1,
AV2, AV3, AV4 or TV mode each time
TV/VIDEO is pressed.
• You can also use TV/VIDEO of the TV
main unit for this operation.
Note:
• About the video modes
• AV1/2: Select this when viewing signals
from the video equipment connected
to the AV-IN 1/2 terminal.
to the AV-IN 1/2 terminal.
• AV3/4: Select this when viewing signals
from the video equipment connected
to the AV-IN 3/4 terminals using the
VIDEO or S-VIDEO terminal for
video input.
to the AV-IN 3/4 terminals using the
VIDEO or S-VIDEO terminal for
video input.
• If both VIDEO and S-VIDEO terminals are
connected with cables, the S-VIDEO input
terminal is selected as high priority.
terminal is selected as high priority.
A V 2
1 S 0 6
A V 1
A V 3
A V 4
1 S 0 6
On-screen display
AV1 mode
AV2 mode
TV mode
TV/
VIDEO
VIDEO
Press the
(MAIN POWER) of the TV
main unit.
• “Now accessing.” is displayed on the
• “Now accessing.” is displayed on the
screen.
• The power/standby indicator of the TV
main unit turns green.
Note:
• The On-screen indicator disappears after a
few seconds.
Press the power button of the Wireless
Centre unit.
• The power indicator of the Wireless
Centre unit.
• The power indicator of the Wireless
Centre turns green.
| To turn off the main power, press the
(MAIN POWER) of the TV main unit
and power button of the Wireless Centre.
To turn off the LCD TV
Press
. The power/standby indicator will turn red.
To turn the LCD TV back on
Press
again. The power/standby indicator will turn green.
1
2
ON/OFF Standby
Power/Standby indicator
1
2
Power indicator
AV3 mode
AV4 mode
1
2
CH
MENU
E
TV/VIDEO
REVEAL
HOLD
END
M
MENU
SOUND
SUBTITLE
SUBPAGE
TEXT
ROTATE
WIDE
T
CH
E
TV/VIDEO
REVEAL
HOLD
END
MENU
SOUND
SUBTITLE
SUBPAGE
TEXT
ROTATE
BRIGHT
T
M
T
OK
18
Changing Channels
You can select channels using Channel Select or CH (
)/(
).
Note:
• You can also use CH (
)/(
) on the TV main unit for this operation.
To select a one-digit channel
(e.g. Channel 5):
(e.g. Channel 5):
Hold down the
button.
To select a two/three-digit channel
(e.g. Channel 15):
(e.g. Channel 15):
Press the
button.
Hold down the
button.
• To handle the increasing number of channels available, this LCD TV set allows you
to select up to 200 channels (0 to 199).
Using CH (
)/(
)
Press CH (
) and the channels change in the order shown below:
1
→ 2 → 3 → . . . → 198 → 199 → 0 → 1 → 2 → 3 → . . .
Press CH (
) and the channels change in the order shown below:
3
→ 2 → 1 → 0 → 199 → 198 → . . . → 3 → 2 → 1 → . . .
1 5
1
Channel
Select
Select
5
CH
(
(
)/(
)
Sound Volume
Basic Operation (Continued)
To adjust the volume
| Press Volume (+) to increase the sound
volume. The numerical value increases.
| Press Volume (–) to decrease the sound
volume. The numerical value decreases.
Note:
• You can also use Volume (+)/(–) of the TV main
unit for this operation.
To mute the sound
| Press Mute to temporarily turn off the
sound. “Sound off” is displayed.
| Press Mute again to turn off the Mute
function. “Sound on” is displayed.
Note:
• When Volume (+)/(–) is pressed in the Mute
mode, the sound turns on and the volume
indicator is displayed.
indicator is displayed.
• The Mute function is cancelled when
is
pressed.
Volume
(+)/(–)
(+)/(–)
Mute
S o u n d o f f
S o u n d o n
Volume
50
50
Volume
10
10
Using Channel Select
When selecting the channel using Channel Select, finish inputting the channel
number by holding down the button for the last digit for a moment.
number by holding down the button for the last digit for a moment.
1
2
2
1
Note:
Note:
• Channel “0” is assigned for RF output of VCR.
CH
MENU
E
TV/VIDEO
REVEAL
HOLD
END
M
MENU
SOUND
SUBTITLE
SUBPAGE
TEXT
ROTATE
WIDE
T
CH
E
TV/VIDEO
REVEAL
HOLD
END
MENU
SOUND
SUBTITLE
SUBPAGE
TEXT
ROTATE
BRIGHT
T
M
T
OK
Click on the first or last page to see other LC-15L1E (serv.man17) service manuals if exist.