DOWNLOAD Sharp LC-13SH1E Service Manual ↓ Size: 2.98 MB | Pages: 32 in PDF or view online for FREE

Model
LC-13SH1E
Pages
32
Size
2.98 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
TV / LCD / LC13 15 20SH1E
File
lc-13sh1e.pdf
Date

Sharp LC-13SH1E User Manual / Operation Manual ▷ View online

6  
Press '/" to select “Start search”, and press OK.
  C o u n t r y                 U K
  C o l o u r   s y s t e m     P A L
  S o u n d   s y s t e m       I
  S t a r t   s e a r c h
• The automatic programme search begins.
                            8                 1 6
        1   E -     2       9                 1 7
        2   E -     4     1                   1 8
        3   U -     2     1 1                 1 9
        4                 1 2                 2
        5                 1 3                 2 1
        6                 1 4                 2 2
        7                 1 5                 2 3
0
0
0
Press END to exit.
NOTE
• After the First installation routine, you can change the settings
of “Language” (page 20) and “Clock setup” (page 20), and
perform “Automatic search” (page 16) again.
First Installation
When you turn on the LCD TV set for the first time, the
First Installation routine, which makes installation easier,
is activated. Using this routine, you can select the on-
screen display language, clock setup and automatically
search for and store all the receivable TV channels.
NOTE
• You can also execute the First Installation routine by
selecting “First installation” on the Setup Menu screen.
For selecting the menu items, see pages 12 and 13.
Press   (MAIN POWER) on the LCD TV set.
• The “First installation” screen with a list of the languages
for the on-screen display is displayed.
Press '/"/\/| to select the desired language, and
press OK.
    E n g l i s h             R u s s i a n
    E s p a ñ o l             P o r t u g u ê s
    D e u t s c h             T ü r k ç e
    F r a n ç a i s           G r e e k
    I t a l i a n o           S u o m i
    S v e n s k a             P o l s k i
    N e d e r l a n d s
Press '/" to set the time, and press OK.
• The time you set is automatically updated via Teletext
time information.
     
 
    :     :
: SELECT  O K : ENTER    M : BACK  E : EXIT
0 0
0 0
0 0
Press '/" to select the desired item, and press
\/| to make the setting.
  C o u n t r y                 U K
  C o l o u r   s y s t e m     P A L
  S o u n d   s y s t e m       I
  S t a r t   s e a r c h
Preparation (Continued)
Control panel of the main unit
   
(MAIN POWER)
1
2
3
4
5
6
LC-13_15_20SH1E_E_P01-09.p65
2004.10.22, 10:07 AM
6
  7
Part Names of the Main Unit
Controls
NOTE
 (Input)P (
)/(
)(Channel), i (–)/(+) (Volume) and MENU on the control panel of the main unit have the same functions as
the same buttons on the remote control (see page 12). Fundamentally, this operation manual provides a description based on operation
using the remote control.
OPC sensor
Remote sensor
OPC (Optical Picture Control) indicator
The OPC indicator lights up green when the “Backlight” is set
to “Auto (OPC)”. (See page 21.)
STANDBY/ON indicator
STANDBY/ON indicator lights up green when the power is on, and red when in
the standby mode (the indicator will not light when the main power is off).
The screen angle can be tilted backwards
between 12 and 30 degrees. (It cannot be
set to vertical.) When changing the angle,
make sure to hold the stand and adjust the
screen to the best viewable angle.
   (MAIN POWER)
Upper control panel
 (Input)
MENU
P (
)/(
) (Channel)
i (–)/(+) (Volume)
How to adjust the angle
12
°
30°
Adjustable range
Speaker
The examples used throughout this manual are based on the LC-20SH1E model.
LC-13_15_20SH1E_E_P01-09.p65
04.10.8, 4:32 PM
7
8  
Part Names of the Main Unit (Continued)
Terminals
Stand
AC INPUT
terminal
Round lock for Kensington 
Security Standard slot
Rear View
Antenna terminal
EXT1
Headphone jack
RGB
(21-pin Euro-SCART)
AUDIO OUT
AUDIO OUT
EXT2
(L)
(R)
VIDEO
AUDIO (L)
AUDIO (R)
S-VIDEO
How to Fix the Cables
Pull the cables connected to each terminal. Insert the cables into the stand hole and fix the cables.
How to Prevent the LCD TV Set from Falling Over
To prevent the LCD TV set from falling over in case
of earthquakes and so on, strap it onto the wall by
threading one end of the string through the loop of
the stand (1) and fastening the LCD TV set with
the string attached to the hook on the wall or the
post, etc. (2).
(An example of strapping the LCD TV set onto the
wall is shown on the right.)
• The string and hook are commercially available.
2
1
Stand
Stand hole
LC-13_15_20SH1E_E_P01-09.p65
04.10.4, 3:29 PM
8
  9
Part Names of the Remote Control
(Sound)
Switches to the sound mode. 
(P. 24)
BACKLIGHT
Selects the brightness and
OPC of the display. (P. 21)
ROTATE
Rotates the display in every
direction. (P. 18)
Upwards/Downwards
Selection, Zoom display
function 
(Teletext mode)
(P. 6, 26)
      (Mute)
Switches the sound on and off.
(P. 11)
(Power)
(P. 10)
MENU
Displays the menu.
Returns to the previous screen.
(P. 12)
 
(Flashback)
Returns to the previous channel. 
(P. 11)
Channel Select
(P. 11)
Blue, Status Display  
Turns on the status display
when the menu is not displayed.
(P. 22, 25)
Yellow (P. 25)
 (+)/(-) (Volume)
(P. 11)
 (    )/(    ) (Input)
Switches the input source
between EXT1, EXT2 
and TV modes. (P. 10)
OK, Programme Table
(P. 6, 18)
END
Returns to normal screen.
(P. 6)
Right/Left Selection
 (P. 6)
(Teletext)
Displays the Teletext mode
screen. (P. 25)
(Reveal)
Displays hidden information
such as solutions to riddles 
and puzzles. (P. 26)
(Hold)
Temporarily holds the
current Teletext page.
(P. 26)
(Subtitle)
Displays the Teletext
Subtitle directly.
(P. 26)
(Subpage)
Displays the Teletext
Subpage directly.
(P. 26)
Red, Picture Menu
 (P. 14, 25)
Green, Sound Menu 
(P. 14, 25)
P (    )/(    ) (Channel) 
(P. 11)
LC-13_15_20SH1E_E_P01-09.p65
04.10.4, 3:29 PM
9
Page of 32
Display

Click on the first or last page to see other LC-13SH1E service manuals if exist.