DOWNLOAD Sharp LC-13SH1E (serv.man6) Service Manual ↓ Size: 829.93 KB | Pages: 2 in PDF or view online for FREE

Model
LC-13SH1E (serv.man6)
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
829.93 KB
Type
PDF
Document
Service Manual
Brand
Device
TV / LCD / -4
File
lc-13sh1e-sm6.pdf
Date

Sharp LC-13SH1E (serv.man6) Service Manual ▷ View online

5
LC-13SH1E
LC-15SH1E
OPERATION MANUAL
Part Names of the Main Unit
Controls
NOTE
 (Input)
P (
)/(
)(Channel)
 (–)/(+) 
(Volume)
 and 
MENU
 on the control panel of the main unit have the same functions as
the same buttons on the remote control. Fundamentally, this operation manual provides a description based on operation 
using th
remote control.
OPC sensor
Remote sensor
OPC (Optical Picture Control) indicator
The OPC indicator lights up green when the “Backlight” is set
to “Auto (OPC)”.
STANDBY/ON indicator
STANDBY/ON indicator lights up green when the power is on, and red when in
the standby mode (the indicator will not light when the main power is off).
The screen angle can be tilted backwards
between 12 and 30 degrees. (It cannot be
set to vertical.) When changing the angle,
make sure to hold the stand and adjust the
screen to the best viewable angle.
 
 (MAIN POWER)
Upper control panel
 (Input)
MENU
P (
)/(
) 
(Channel)
 (–)/(+) (Volume)
Ho
w to adjust the angle
12
°
30
°
Adjustab
le r
ange
Speaker
The examples used throughout this manual are based on the LC-20SH1E model.
Terminals
Stand
A
C
 INPUT
terminal
Round loc
k
 f
or K
ensington 
Security Standar
d slot
Rear Vie
w
Antenna terminal
EXT1
Headphone jac
k
RGB
(21-pin Eur
o-SCAR
T)
A
UDIO OUT
A
UDIO OUT
EXT2
(L)
(R)
VIDEO
A
UDIO (L)
A
UDIO (R)
S-VIDEO
How to Fix the Cables
Pull the cables connected to each terminal. Insert the cables into the stand hole and fix the cables.
How to Prevent the LCD TV Set from Falling Over
To prevent the LCD TV set from falling over in case
of earthquakes and so on, strap it onto the wall by
threading one end of the string through the loop of
the stand (
1
) and fastening the LCD TV set with
the string attached to the hook on the wall or the
post, etc. (
2
).
(An example of strapping the LCD TV set onto the
wall is shown on the right.)
The string and hook are commercially available.
2
1
Stand
Stand hole
6
LC-13SH1E
LC-15SH1E
P
a
rt
 Names of the Remote Contr
ol
(Sound)
Switches to the sound mode. 
BACKLIGHT
Selects the brightness and
OPC of the display. 
ROTATE
Rotates the displa
y in e
v
er
y
direction.
Upwards/Downwards
Selection, Zoom display
function 
(T
elete
xt mode)
      (Mute)
Switches the sound on and off.
(Power)
MENU
Displa
ys the men
u.
Retur
ns to the pre
vious screen.
 (Flashback)
Returns to the previous channel. 
Channel Select
Blue, Status Display  
Turns on the status display
when the menu is not displayed.
Yellow 
 (+)/(
-
( Volume
)
 (    
)/(    
) (Input)
Switches the input source
between EXT1, EXT2 
and TV modes. 
OK, Programme Table
END
Retur
ns to nor
mal screen.
Right/Left Selection
(Teletext)
Displa
ys the 
T
elete
xt mode
screen.
(Reveal)
Displa
ys hidden inf
or
mation
such as solutions to r
iddles 
and puzzles
.
(Hold)
Temporarily holds the
current Teletext page.
(Subtitle)
Displays the Teletext
Subtitle directly.
(Subpage)
Displa
ys the 
T
elete
xt
Subpage directly
.
Red, Picture Menu
Green, Sound Menu
 
P (    
)/(    
) (Channel) 
Installing Batteries in the Remote Control
Before using the LCD TV set for the first time, install the two 
“AA
” size batteries (supplied) in the remote control. When the
batteries become depleted and the remote control fails to operate, replace the batteries with new 
“AA
” size batteries.
1
Open the battery cover.
2
Insert two 
“AA
” size batteries.
3
Close the battery cover.
Place batteries with their
terminals corresponding
to the (+) and (
)
indications in the battery
compartment.
Caution!
Precautions regarding batteries
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.
Place batteries with their terminals corresponding to the (+) and (
) indications.
Different types of batteries have different characteristics. Do not mix batteries of different types.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause old
batteries to leak chemicals.
Remove batteries as soon as they are depleted. Chemicals that leak from batteries can cause a rash. If chemical
leakage is found, wipe it off with a cloth.
The batteries supplied with the LCD TV set may have a shorter operating time due to storage conditions.
If the remote control is not to be used for an extended period of time, remove the batteries from the remote control.
Align the tab on the battery cover (
1
) and place
it while pressing the tab (
2
) to close it.
Using the Remote Control
Use the remote control by pointing it towards the remote sensor
window of the main unit. Objects between the remote control and
sensor window may prevent proper operation.
Cautions regarding use of the remote control
Do not apply shock to the remote control. In addition, do not
expose the remote control to liquids, and do not place it in an area
with high humidity.
Do not install or place the remote control under direct sunlight. The
heat may cause deformation of the unit.
The remote control may not work properly if the remote sensor
window is under direct sunlight or strong lighting. In such a case,
change the angle of the lighting or main unit, or operate the remote
control closer to the remote sensor window.
Detach the cover
while pressing the
(
"
) part.
ST
ANDBY/ON 
indicator
OPC indicator
Remote sensor
OPC sensor
2
Preparation
1
Display

Sharp LC-13SH1E (serv.man6) Service Manual ▷ Download

  • DOWNLOAD Sharp LC-13SH1E (serv.man6) Service Manual ↓ Size: 829.93 KB | Pages: 2 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sharp LC-13SH1E (serv.man6) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp LC-13SH1E (serv.man6) LCD. Information contained in Sharp LC-13SH1E (serv.man6) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.