Sharp LC-13E1E (serv.man10) Service Manual ▷ View online
LC-13E1E
LC-15E1E
LC-15E1E
5
E
CH
TV/VIDEO
REVEAL
H
OLD
EN
D
M
MENU
SOUND
SU
B
TIT
LE
OK
OK, Programme Tabl
e
SUBTITLE
Displays the Teletext
Subtitle directly.
HOLD
Temporarily holds the
current Teletext page.
Mute
Switches the sound on and off.
Yellow,
Timer function Menu
Cyan, Status Display
Turns on the status display
when the menu is not
displayed.
TV/VIDEO
Switches the input source
between AV1, AV2 and
TV mode.
Channel Select
MENU
Displays the
TV menu.
Volume (+)/(
-
)
Flashback
Returns to the previous
channel.
Red, Picture Menu
Upwards
/Downwards
Selection, zoom display
function
(Teletext mode)
)
END
Returns to normal screen.
)
TEXT
Displays the
T
e
letext mode
screen.
(Power)
SOUND
Switches the sound
mode.
REVEAL
Displays hidden informatio
n
such as solutions to riddles
and puzzles.
Right /
Left
Selection
SUBPAGE
Displays the
T
e
letext
Subpage directly
.
ROTATE
Rotates the display in ever
y
direction.
BRIGHT
Selects the brightness
of the display.
Green, Sound Menu
SUBPAGE
TE
X
T
ROTATE
B
R
IG
H
T
T
CH (
)/(
)
Displays previous/next page.
(Teletext mode)
Installing Batteries in the Remote Control
Before using the LCD TV set for the first time, install the two R-03 (“AAA” size, UM/SUM-4) batteries supplied
in the remote control. When the batteries become depleted and the remote control fails to operate, replace
the batteries with new R-03 (“AAA” size, UM/SUM-4) batteries.
1
Open the battery cover.
2
Insert two R-03 (“AAA” size,
UM/SUM-4) batteries.
3
Replace the battery cover.
Ë
Position the positive and
negative ends of the
batteries as indicated in
the compartment.
Caution!
Precautions regarding batteries
Ë
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the
instructions below.
•
Place batteries with their terminals corresponding to the (+) and (–) indications.
•
Different types of batteries have different characteristics. Do not mix batteries of different types.
•
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/
or cause old batteries to leak chemicals.
•
Remove batteries as soon as they are depleted. Chemicals that leak from batteries can cause a rash. If
chemical leakage is found, wipe it off with a cloth.
•
The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
•
If the remote control is not to be used for an extended period of time, remove the batteries from the
remote control.
Ë
Engaging the lower
claw with the remote
control, close the
cover.
Ë
Slide the cover while
pressing the
(
) part.
|
LC-13E1E
LC-15E1E
LC-15E1E
6
Dimensions
Unit: mm
LC-13E1E
LC-13E1E
LC-15E1E
LC-15E1E
7
Unit: mm
LC-15E1E
LC-13E1E
LC-15E1E
LC-15E1E
12
ADJUSTING PROCEDURE OF EACH SECTION
The best adjustment is made before shipping. If any position deviation is found or after part replace is performed,
adjust as follows.
adjust as follows.
Preparation for adjustments
Use the dedicated AC adaptor or stable DC power supply.
AC adaptor: UADP-A007WJPZ
DC power supply: 12V 4.0A
AC adaptor: UADP-A007WJPZ
DC power supply: 12V 4.0A
1. Adjusting procedure
• Checker adjustment
Power ON (Adjustment processing mode)
→
+B adjustment
→
Counter bias adjustment
→
TAMP (Contrast)
adjustment
→
White balance adjustment
2. Entering the adjustment processing mode
There are the following two methods.
• Setting the pin (81)(KEY4) or pin (82)(KEY5) of IC2001 (microprocessor) to GND, turn on the power.
• A “POWER” key is made on with pushing an “TV/VIDEO” and “MENU” keys at the same time.(K of the inspection
• Setting the pin (81)(KEY4) or pin (82)(KEY5) of IC2001 (microprocessor) to GND, turn on the power.
• A “POWER” key is made on with pushing an “TV/VIDEO” and “MENU” keys at the same time.(K of the inspection
process mode is displayed by the upper left of the image plane.)
→
Next, “CH (
Ù
)” and “VOL (–)” keys are pushed
at the same time.(It becomes the image plane of the adjustment process mode.).....When it is canceled, it is made
to turn it off.(Even off in the “MAIN POWER” key, off with R/C are good.)
to turn it off.(Even off in the “MAIN POWER” key, off with R/C are good.)
3. Key operation in the adjustment process mode
• The receiving channel UP/DOWN is performed with the “CH (
ù
)/(
Ù
)” keys.
One push ... The UP/DOWN tuning is performed per channel.
Continuous push ... The UP/DOWN search is performed until a next receivable station is found.
Continuous push ... The UP/DOWN search is performed until a next receivable station is found.
• Various adjustments
The adjustment is performed for each item by the “MENU”, “Menu cursor”, “CH (
ù
)/(
Ù
)” or “VOL (+)/(–)” keys
(LCD TV set and remote control).
• Adjustment item is chosen with the Menu cursor upward/downward keys.
• The adjustment item makes a toggle operation with the “MENU” key input. (Next item)
• The adjustment item makes a toggle operation with the “MENU” key input. (Next item)
If the “MENU” key is input while the bottom item is selected, it moves to the top item on the next page.
• Press the auto preset button on the remote controller in the adjustment process mode, and the top item of the
next page will show up regardless of which item appears now.
Page 1
Page 1
→
Page 2
→
...
→
Page 24
→
Page 1
• Press the manual memory button on the remote controller in the adjustment process mode, and the top item of
the same page will show up.
• UP/DOWN of each adjustment vale selected is performed with the VOL (+)/(–) keys input.
• For P16 – 17, the unit enters the register select mode with the VOL (+)/(–) keys input while NTSC/PAL is selected,
• For P16 – 17, the unit enters the register select mode with the VOL (+)/(–) keys input while NTSC/PAL is selected,
and the cursor moves to the address 01.
• The cursor moves up or down with the “CH (
ù
)/(
Ù
)” keys and moves left or right with the VOL (+)/(–) keys, and a
decision is made with the 12 key.
When the decision is made, the cursor moves to the adjustment value selected, and UP/DOWN of each adjustment
value selected by the “VOL (+)/(–)” keys input is performed.
0
When the decision is made, the cursor moves to the adjustment value selected, and UP/DOWN of each adjustment
value selected by the “VOL (+)/(–)” keys input is performed.
0
↔
1
↔
...
↔
9
↔
A
↔
...
↔
F
↔
0
↔
...
Decide with the 12 key and return to the address select. Move to the next item with the “MENU” key.
During address select, the cursor movement by the “VOL (+)/(–)” keys input is as follows:
Example: 01
During address select, the cursor movement by the “VOL (+)/(–)” keys input is as follows:
Example: 01
↔
02
↔
03
↔
01
↔
...
The cursor movement by the “CH (
ù
)/(
Ù
)” keys input is as follows:
Example: 02
↔
05
↔
...
↔
F6
↔
02
↔
...
Click on the first or last page to see other LC-13E1E (serv.man10) service manuals if exist.