Sharp LC-13C2E (serv.man3) Service Manual ▷ View online
5
LC-13C2E
OUTLINE DIMENSION FIGURE
Units: mm
271.2
59.3
177.8
334
398.7
128.5
270.2
1
214
267
198.72
200.8
264.96
80.2
74.4
102.9
0.5
51
9
6
177.8
18
137.3
9
40.5
1
VIDEO
AUDIO
S-VIDEO
L
R
AV-IN 2
POWER
INPUT
DC12V
DC12V
AUDIO OUT
AV-IN 1
RGB
L
R
100
6.8
28
15
49
66.5
8.4
2.4
100
16
15
15
LC-13C2E
6
DISASSEMBLY OF THE SET
1. Remove the four lock screws from the stand.
2. Detach the terminal cover.
3. Remove the five lock screws from the cabinet B.
4. Remove the one lock screw.
5. A cabinet is opend in order of 5-9 ~ 5-1 , and a cabinet B is removed.
6. Disconnect the connectors from the PWBs.
2. Detach the terminal cover.
3. Remove the five lock screws from the cabinet B.
4. Remove the one lock screw.
5. A cabinet is opend in order of 5-9 ~ 5-1 , and a cabinet B is removed.
6. Disconnect the connectors from the PWBs.
Stand
Cabinet B
Cabinet A
Terminal Cover
5-9
5-8
5-7
5-6
5-5
5-4
5-3
5-2
5-1
3
1
2
3
3
4
3
3
MAIN PWB
TUNER PWB
S-OUT PWB
VIDEO PWB
SWITCH PWB
P3311
SC801
SC1202
SC1201
SC901
SC902
P904
P701
P4004
P305
P304
P3302
P903
P901
P3301
P2003
P5701
P5702
P5001
P702
P3600
P3310
P3604
6
6
6
6
6
6
6
6
6
6
6
7
LC-13C2E
7. Remove the two lock screws from the VIDEO PWB.
8. Remove the four lock screws from the TUNER PWB.
9. Remove the two lock screws from the MAIN PWB.
10. Remove the two lock screws.
11. Remove the three lock screws from the chassis frame.
12. Remove the two lock screws from the LCD panel.
13. Remove the two lock screws from the SWITCH PWB.
8. Remove the four lock screws from the TUNER PWB.
9. Remove the two lock screws from the MAIN PWB.
10. Remove the two lock screws.
11. Remove the three lock screws from the chassis frame.
12. Remove the two lock screws from the LCD panel.
13. Remove the two lock screws from the SWITCH PWB.
7
9
8
11
10
11
12
13
8
Video PWB
21PinTerminal
Fixing Angle
Fixing Angle
Main PWB
Switch PWB
Cabinet A
LCD Panel
Chassis Frame
Tuner PWB
S-OUT PWB
LC-13C2E
8
• Precautions in handling the LCD panels.
1. Work in a clean room. (with humidities below 50%)
2. Be sure to wear an anti-static armband.
3. Handle the panels on an electroconductive mat.
4. Be careful not to fall, shake and shock the panels.
5. Use an ionizer. (within 30cm)
1. Work in a clean room. (with humidities below 50%)
2. Be sure to wear an anti-static armband.
3. Handle the panels on an electroconductive mat.
4. Be careful not to fall, shake and shock the panels.
5. Use an ionizer. (within 30cm)
16
19
15
17
Reflector
Reflection Sheet-1
(PSHEP0246CEZZ)
(PSHEP0246CEZZ)
Light Guide Sheet
18
Lamp Unit
(KLMP-0109CEZZ)
(KLMP-0109CEZZ)
Reflection Sheet-2
(PSHEP0247CEZZ)
(PSHEP0247CEZZ)
14
14
Diffusion Sheet
D-BEFE
LCD Unit
GATE-FFC
16
Reflector
Shield Plate
14. Remove the four lock screws from the LCD panel and remove the LCD panel.
15. Remove the diffusion sheet and D-BEFE.
16. Four reflectors in every direction are removed.
17. Remove the photoconductive plate.
18. Remove the fluorescent lamp.
19. Remove the two reflection sheets.
15. Remove the diffusion sheet and D-BEFE.
16. Four reflectors in every direction are removed.
17. Remove the photoconductive plate.
18. Remove the fluorescent lamp.
19. Remove the two reflection sheets.
Click on the first or last page to see other LC-13C2E (serv.man3) service manuals if exist.