DOWNLOAD Sharp 76GF-64H (serv.man12) Service Manual ↓ Size: 343.33 KB | Pages: 17 in PDF or view online for FREE

42

With this process you can set a late recording with the settings of the
current day by copying the data from TV GUIDE. This function
operates only if the tuned station broadcasts a teletext signal. 
1.

Select the channel you wish to record by using the 0 ~ 9 digit

or 

E

/ 

F

buttons.

Press the TV/VIDEO button  

●

to see the TV/VIDEO Menu.

Press the BLUE button 

to see the AV LINK Menu.

Press the Cursor UP/DOWN buttons  

E

/ 

F

to select

Timer programming. The red point mark indicates the selected item.
5.

Press the BLUE button 

to see the TIMER PROGRAMMING

Press the GREEN button 

to see the TV GUIDE.

Teletext page is shown with all programming information for the
current channel. A cursor appears too.

Press the Cursor UP/DOWN buttons 

E

/ 

F

to select

the program you wish to record.

If necessary, press the Cursor DOWN button 

F

several times to

see the next pages.
8.

Press the GREEN button 

to transfer the program data from 

TV GUIDE to TIMER PROGRAMMING Menu.

Device: Press the Cursor LEFT/RIGHT buttons  

C 

/

I

to select

the controller set (VCR or TV) [

 Page 41].

Press the Cursor UP/DOWN buttons 

E

/ 

F

to select:

Mode: If you want to make additional recordings at the same time

each day or week, use 

C 

/

I

to select Daily or Weekly.

Speed: to change recording speed between Standard-Play (SP) and

Long-Play (LP), by using  

C 

/

I

buttons.

Standard-Play gives the best picture quality; Long-Play provides the
longest recording time.

Press the YELLOW button 

«PROG. VCR» to memorize the

TIMER PROGRAMMING data.

Now the VCR should be manually set for Timer Mode. Refer to

your VCR operation manual for further information.

Press the TV/VIDEO button 

●

to clear the on-screen display.

 

The headphone jack is located behind the door.
How to open the door : Press the top of the door, opening it slightly
hook your finger inside and pull open.

Safety: In order to protect your ears, turn down the volume of 
the headphones before connecting them. 

Press the MENU button  

●

to see the MAIN Menu.

Press the GREEN button  

to see the AUDIO EFFECTS

Press the RED button  

twice to see the HEADPHONES

Turn down the volume with the Cursor LEFT button 

C

.

Insert the headphone plug all the way into the headphone jack as
indicated on the drawing.

Adjust the sound quality to your liking with the Cursor

LEFT/RIGHT buttons 

C 

/

I

.

Press the MENU button 

●

to clear the on-screen display.

  

h

This set has a quick access function for teletext subtitles, so that they can be selected by the press of one button.

Simply press the 

h

button on the remote control whilst in viewing mode (I.E. not teletex etc.) and subtitles will

automatically be selected and displayed on the screen.

To exit this mode press

h

button again on the remote control.

f

Press the button to display the current time on the screen. 
Note: that this function operates only if the tuned station broadcasts a teletext signal. 

43

3.5 mm ø Jack plug Earphone or
Headphone Impedance 16-600 

B

w

S-VIDEO

VIDEO

L/S/G/I

AUDIO

R/D/D/D

44

SHARP VCR can be operated using the TV remote control.

CH  

These buttons are used for changing channels and setting the timer.

Press this button to start playback.

Press this button to start recording. If the video cassette is protected

against recording, it will be ejected.

Press this button to stop playback or recording.

B

l

VCR

Press this button to turn your VCR on. 

Both these buttons have the following function:

 

To move through the cassette faster, press the STOP  

button to stop and then press the  

or  

button to fast forward or rewind the cassette.

 

Press the STOP 

button to stop fast forward or rewind.

 

During playback, press the  

button for forward picture search, or the  

button for reverse search.

 

Press the PLAY  

button to resume normal playback.

For further details, please refer to operation manual of your VCR.

45

1. Audio right output

2. Audio right input

3. Audio left output

4. Common earth for audio

5. Earth for blue

6. Audio left input

7. Blue input

8. Audio-video control

9. Earth for green

10. Not used

11. Green input

12. Not used

13. Earth for red

14. Not used

15. Red input

16. Red/Green/Blue control

17. Earth for video

18. Earth for Red/Green/Blue control

19. Video output

20. Video input (PAL/SECAM/NTSC)

21. Plug shield

1. Audio right output

2. Audio right input

3. Audio left output

4. Common earth for audio

5. Earth 

6. Audio left input

7. Not used

8. Audio-video control

9. Earth 

10. AV LINK control signal

11. Not used

12. Not used

13. Earth 

14. Not used

15. Chroma S-Video input

16. Not used

17. Earth for video

18. Earth 

19. Video output

20. Video input 

(PAL/SECAM/NTSC/S-Video)

21. Plug shield

1. Audio right output

2. Audio right input

3. Audio left output

4. Common earth for audio

5. Earth 

6. Audio left input

7. Not used

8. Audio-video control

9. Earth 

10. Not used

11. Not used

12. Not used

13. Earth 

14. Not used

15. Not used

16. Not used

17. Earth for video

18. Earth 

19. Video output

20. Video input 

(PAL/SECAM/NTSC)

21. Plug shield

21-pin Audio/Video (AV-2)
With PAL/SECAM/NTSC Video Input.

21-pin Audio/Video (AV-1)
With PAL/SECAM/NTSC/S-Video Input
and AV LINK control signal.

21-pin Euro SCART (RGB) 
With PAL/SECAM/NTSC Video Input.