DOWNLOAD Sharp 76GF-64H (serv.man12) Service Manual ↓ Size: 343.33 KB | Pages: 17 in PDF or view online for FREE

Model
76GF-64H (serv.man12)
Pages
17
Size
343.33 KB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
TV / CTR / Split - Part 6 - TV guide, 21-pin Euro-SCART and 21-pin Audio Video, Typical connections, Troubleshooting, General specs for TV receiver, Index - page 35-
File
76gf-64h-sm12.pdf
Date

Sharp 76GF-64H (serv.man12) User Manual / Operation Manual ▷ View online

39
The following sections explain how to make consistent changes in the parameters displayed on the screen, so that you
will be able to expand or modify the list of broadcasting stations in order to adapt it to any changes. 
2. 
After the automatic search is conducted, the Programs in Memory menu appears
Select those broadcasting stations whose names are repeated and delete any that you do not want, using the menu
option "Delete this programme".
Assign a correct name to those that remain, using the "Edit this programme" option on the menu. You will note that when
you change the first letter, the three following letters are sometimes written as well; it is advisable to use these names.
Assign those stations that you wish to use with the TV GUIDE to programmes PR 1, Pr 2, Pr 3 and Pr 4, through the "Go
to sorting mode" option. 
Press the BLUE button to close the Stored programmes menu.
Press the MENU button, press BLUE button and press YELLOW button to see the TV Guide menu.
Make sure that each item of information displayed is correct for the stations selected in PR 1 through PR 4 (for an
explanation of the meaning, see the previous section). You may have top leave the menu and enter teletext in order to
make sure. 
If it is all correct, press BLUE button to quit. If not, you can change: 
the page numbers
the access colour (red, green, yellow, blue or none)
the page type (Rolling or Non-rolling) 
the name of the station that each access mode corresponds to using the  
/
I
and 
E
F
buttons.
3. Adding new items to the station list
To enable a complete configuration of the system, the following situations have been provided for.
3.1
When a station stored in the memory sends information on a new station.
In this case, you must add an item in the station list that is contained in any given station.
To do this, press either the  
or
I
buttons so that a letter or number starts to blink, and then select the option "Add
new broadcaster" pressing the RED button. You will see a new item created on the list, which has the following form: 
Then enter the correct data for this new item. 
By selecting the option "Delete this item", the item marked by the blinking cursor will be deleted. Use this option when
any previously stored station ceases to send information on a station or if an error has been made.
3.2
When a new station is stored in the memory
Before proceeding, check to see if any of the previously stored stations also send information on this new station. If so,
first follow the procedure explained in section 3.1.
To add a new station to the list, press either  
or
I
buttons in such a way that no blinking cursor is on the screen.
Then select the option "Add new broadcaster". You will see that a new item has been created on the list, which has the
following form: 
Then enter the correct data for this new item.
By selecting the option "Delete this item", the item marked by the blinking cursor will be deleted.
To delete a station completely, make sure that there is no blinking cursor on the screen. Use this option if you want to
eliminate a station or if an error has been made.
new item
blink
40
Web-site: www.sharp.co.uk/support
Help Line (office hours only): 08705 274277
Other Features
TV/Video selector button (TV/VIDEO)
The signal source can be selected from each of the input terminals in
this mode.
1.
Press the TV/VIDEO button  ● to see the TV/VIDEO Menu.
2.
Press the GREEN, YELLOW or BLUE button 
to see the
REAR Menu, FRONT Menu or AV LINK Menu 
 ].
REAR Menu
3.1. Press the Cursor UP/DOWN buttons  
E
F
to select
another signal source. The red point mark indicates the selected
source.
3.2. Press the TV/VIDEO button 
to clear the on-screen display 
or press:  RED button 
to restore the AERIAL signal.
YELLOW button 
to see the FRONT Menu.
BLUE button 
to see the AV LINK Menu [
]
FRONT Menu
4.1. Press the Cursor UP/DOWN buttons  
E
F
to select
another signal source. The red point mark indicates the selected
source.
4.2. Press the TV/VIDEO button 
to clear the on-screen display
or press: RED button 
to restore the AERIAL signal.
GREEN button 
to see the REAR Menu.
BLUE button 
to see the AV LINK Menu [
]
AV LINK Menu - Record what you see-
[
]
5.1. Press the Cursor UP/DOWN buttons  
E
F
to select
Record what you see. The red point mark indicates the selected
item.
5.2. Press the RED button 
to start recording.
5.3. Press the GREEN button 
to stop recording.
Device scan check if a VCR with AV LINK system
is connected to the TV, through the AV-1 terminal.
  About AV LINK: THIS FEATURE CAN ONLY BE USED WITH NexTView, Smart Link, Easy Link
and Megalogic COMPATIBLE VCR.
This “Intelligent” communication system allows to control some VCR functions from the TV and vice versa.
For example it is possible to program the VCR timer recording from the TV or record the signal currently being
displayed on the TV regardless of the signal source.
In this case, the VCR and the TV must be connected through the euroconnector specially available for this function
(AV-1 terminal in this TV set). Refer to your VCR operation manual for further information.
TV/VIDEO Menu
REAR Menu
FRONT Menu
AV LINK Menu
A
41
AV LINK Menu - Preset download
6.1. Press the Cursor UP/DOWN buttons 
E
F
to select
Preset download. The red point mark indicates the selected item.
6.2. Press the BLUE button 
to begin preset downloading to
the VCR.
6.3. The message                                appears on the screen.
If the TV is connected to a VCR with AV LINK function or compatible,
the TV will automatically transfer the stored TV channels to the VCR.
6.4. When the message disappears, the programme list of the VCR
is now the same as of the TV set.
AV LINK -TIMER PROGRAMMING-
In this menu you can set a late start and stop time for a recording.
1.
Select the channel you wish to record by using the 0 ~ 9 digit
or 
E
F
buttons.
2.
Press the TV/VIDEO button  
● 
to see the TV/VIDEO Menu.
3. 
Press the BLUE button 
to see the AV LINK Menu.
4.
Press the Cursor UP/DOWN buttons 
E
F
to select
Timer programming. The red point mark indicates the selected item.
5.
Press the BLUE button
to see the TIME PROGRAMMING
Menu.
6.
Press the Cursor UP/DOWN buttons 
E
F
to select:
Device: to select the controller set (VCR or TV) [
] by using the
Cursor LEFT/RIGHT buttons 
/
I
.
Date: to enter the recording date using the number buttons. Enter 2 digits for the date, then 2 for the month. e.g. For
July 9th, press 0 9 (9th), then 0 7 (July).
Start/End: to set a late start and stop time. Enter 2 digits for the hour and 2 for the minutes for the Start, then 2 for the
hour and 2 for the minutes for the End.
Mode: if you want to make additional recordings at the same time each day or week, use  
/
I
to select Daily or Weekly.
Speed: to change recording speed between Standard-Play (SP) and Long-Play (LP), by using 
/
I
buttons.
Standard-Play gives the best picture quality; Long-Play provides the longest recording time.
7.
Press the YELLOW button 
«PROG. VCR» to memorize the TIMER PROGRAMMING data.
8.
Now the VCR should be manually set for Timer Mode. Refer to your VCR operation manual for further information.
9.
Press the TV/VIDEO button 
to clear the on-screen display.
About Device
«Device VCR»: preferably select «Device VCR» to memorize the TIMER PROGRAMMING data in video memory
buffer.
When you select «Device VCR», Mode (Unique/Daily/Weekly) and Speed (SP/LP) can be changed only if the video
has these functions available.
«Device TV»: when the video cannot accept the TIMER PROGRAMMING data (i.e. when the video has the
memory buffer full), select «Device TV» to memorize the TIMER PROGRAMMING data in TV memory buffer.
When you select «Device TV», the late recording only can be applied within the next 24 hours.
When you select «Device TV», Mode (Unique) and Speed (SP) cannot be changed.
When you select «Device TV», in the event of a power cut, disconnection from the plug or if you turn off the TV by
the Main power button (
æ) on the TV set, the TIMER PROGRAMMING data will be cancelled; In order to keep the
programmed data, use Stand-by button (
æ TV) on the remote control to switch off the TV set.
AV LINK DOWNLOAD:
PROGRAM     XX
AV LINK Menu
TIMER PROGRAMMING Menu
42
Web-site: www.sharp.co.uk/support
Help Line (office hours only): 08705 274277
TIMER PROGRAMMING by TV GUIDE
With this process you can set a late recording with the settings of the
current day by copying the data from TV GUIDE. This function
operates only if the tuned station broadcasts a teletext signal. 
1.
Select the channel you wish to record by using the 0 ~ 9 digit
or 
E
F
buttons.
2.
Press the TV/VIDEO button  
to see the TV/VIDEO Menu.
3.
Press the BLUE button 
to see the AV LINK Menu.
4.
Press the Cursor UP/DOWN buttons  
E
F
to select
Timer programming. The red point mark indicates the selected item.
5.
Press the BLUE button 
to see the TIMER PROGRAMMING
Menu. 
6. 
Press the GREEN button 
to see the TV GUIDE.
Teletext page is shown with all programming information for the
current channel. A cursor appears too.
7.
Press the Cursor UP/DOWN buttons 
E
F
to select
the program you wish to record.
If necessary, press the Cursor DOWN button 
F
several times to
see the next pages.
8.
Press the GREEN button 
to transfer the program data from 
TV GUIDE to TIMER PROGRAMMING Menu.
9.
Device: Press the Cursor LEFT/RIGHT buttons  
/
I
to select
the controller set (VCR or TV) [
 Page 41].
10.
Press the Cursor UP/DOWN buttons 
E
F
to select:
Mode: If you want to make additional recordings at the same time
each day or week, use 
/
I
to select Daily or Weekly.
Speed: to change recording speed between Standard-Play (SP) and
Long-Play (LP), by using  
/
I
buttons.
Standard-Play gives the best picture quality; Long-Play provides the
longest recording time.
11.
Press the YELLOW button 
«PROG. VCR» to memorize the
TIMER PROGRAMMING data.
12.
Now the VCR should be manually set for Timer Mode. Refer to
your VCR operation manual for further information.
13.
Press the TV/VIDEO button 
to clear the on-screen display.
TIMER PROGRAMMING Menu
TV GUIDE
TIMER PROGRAMMING Menu
Page of 17
Display

Click on the first or last page to see other 76GF-64H (serv.man12) service manuals if exist.