DOWNLOAD Sharp 76FW-53H (serv.man21) Service Manual ↓ Size: 3.54 MB | Pages: 42 in PDF or view online for FREE

15

 

C 

/

I

Use the 

C 

/

I

buttons to increase/decrease the volume level. The

volume indicator will appear on the screen.

Note: To adjust the headphone volume, see the 
-HEADPHONES LEVELS Menu- (page 17).

 

Sound mute button (c)

Press the button to mute the sound. The symbol c appears on the screen. Press the button again to turn the sound
back on.

5

Press the button to change the sound in the speakers. The sound mode will appear on the screen.

Depending on the sound transmission the sound reproduction can be chosen as indicated below :

When the TV set is receiving a STEREO (NICAM) programme, the TV selects STEREO automatically, and you can
change:

STEREO 

 MONO 

When the TV is receiving a BILINGUAL (NICAM) programme, the TV selects DUAL CHANNEL A automatically, and you
can change:

DUAL CHANNEL A 

 DUAL CHANNEL B DUAL CHANNEL A B MONO

When the TV is receiving a MONO (NICAM) programme, the TV set selects MONO NICAM automatically, and you can
change:

MONO NICAM 

 MONO (FM) 

When the TV is receiving a MONO (FM) programme, the TV set selects MONO automatically but the sound mode
cannot be change.

Note: See the -STEREO Menu- (page 18) to change the Sound Mode in the headphones or in the audio output of the
external connectors.

Sound Indicator: When the TV set is receiving a STEREO, BILINGUAL or MONO Nicam programme the Sound
Indicator lights.

External source: When you are watching the TV-set through the Euro-SCART, AV-1, AV-2, Front A/V or S-Video
terminals, the Sound Mode Selector button and Sound indicator light are not operative.

I/II/I+II

16

Sound quality is adjustable in this menu.
1.

Press the MENU button 

● to see the MAIN Menu.

Press the GREEN button 

to see the AUDIO EFFECTS

Menu.

Press the Cursor LEFT/RIGHT buttons 

C 

/

I

to change the

AUDIO MODE: Bypass or Spatial expander.
The AUDIO EFFECTS Menu depends on the AUDIO MODE as
indicated below:

Bypass: Normal sound without sound effect.

Press the Cursor UP/DOWN buttons 

E

/ 

F

to select

Automatic volume correction [

]. The red point mark indicates the

selected parameter.

Press the Cursor LEFT/RIGHT buttons 

C 

/

I

to select three

different levels: Short, Middle or Long.
Select Off to deactivate the Automatic volume correction.

Press the Cursor UP/DOWN buttons 

E

/ 

F

to select:

Automatic volume correction or Spatial strength.

Automatic volume correction: Press the Cursor LEFT/RIGHT

buttons 

C

/ 

I

to select three different levels: Short, Middle or

Long.
Select Off to deactivate the Automatic volume correction.

Spatial strength: Adjust the sound quality to your liking with the

Cursor LEFT/RIGHT buttons 

C 

/

I

.

 About Automatic volume correction
Different sound sources, fairly often do not have the same volume level, for example the changing from movie to
the advertisements. The Automatic Volume Correction (AVC) solves this problem and equalizes the volume levels.

 About Spatial expander
The kind of Spatial expander effect depends on the source mode. If the incoming signal is in mono mode, Pseudo
Stereo Effect is active; for stereo signals, Stereo Basewidth Enlargement is effective.
The Pseudo stereo effect cannot restore any room or panning information from a mono signal. It does, however
produce two uncorrelated output signals which can give a dramatic improvement to mono signals without
sounding like a musical effect rather than true stereo.

 Spatial strength
When the AUDIO MODE is in Spatial expander effect, you can reduce or enlarge the stereo image by Spatial
strength control.

17

Press the MENU button 

● to see the MAIN Menu.

Press the GREEN button 

to see the AUDIO EFFECTS

Menu.

Press the RED button 

to see the SPEAKER LEVELS Menu.

Press the Cursor UP/DOWN buttons 

E

/ 

F

to select:

Volume, Balance or Loudness mode.
The red point mark indicate the selected item.

Adjust the sound quality to your liking with the Cursor

LEFT/RIGHT buttons 

C 

/

I

.

Select Loudness mode (NORMAL, SPECIAL or OFF) to
improve the sound quality [

].

Press the RED button 

to see the HEADPHONES LEVELS

Press the Cursor UP/DOWN buttons 

E

/ 

F

to select:

Volume, Balance, Loudness mode, Bass or Treble.
The red point mark indicates the selected item.

Adjust the sound quality to your liking with the Cursor

LEFT/RIGHT buttons 

C 

/

I

.

Press the RED button 

to see the EXTERNAL LEVELS

10. Press the Cursor UP/DOWN buttons 

E

/ 

F

to select:

SCART volume or AV volume.
The red point mark indicates the selected item.
Select SCART volume to adjust the sound level output to the
Euro-SCART connector (RGB) with the Cursor LEFT/RIGHT

buttons 

C 

/

I

.

Select AV volume to adjust the sound level output to the external

connectors (AV-1/AV-2) with the Cursor LEFT/RIGHT buttons 

C 

/

I

.

11. Press the MENU button 

● to close the AUDIO LEVELS Menus.

 Loudness increases the volume of low and high frequency signals according to the current volume setting.
In NORMAL mode keeping the amplitude of the 1 KHz reference frequency constant.
In SPECIAL mode keeping the amplitude of the 2 KHz reference frequency constant.

Press the MENU button 

● to see the MAIN Menu.

Press the GREEN button 

to see the AUDIO EFFECTS

Press the GREEN button 

if you wish to normalize audio lev-

els to default factory setting.

18

Press the MENU button 

● to see the MAIN Menu.

Press the GREEN button 

to see the AUDIO EFFECTS

Press the YELLOW button 

to see the EQUALIZER Menu.

Press the YELLOW button 

to select a pre-defined

equalization: Personal / Classic / Jazz / Pop / In concert / Sport.

To change the Personal option:

a) Press the Cursor LEFT/RIGHT buttons 

C 

/

I

to select:

100Hz, 330Hz, 1KHz, 3.3KHz or 10KHz 
The red point mark indicates the selected item.

b) Press the Cursor UP/DOWN buttons 

E

/ 

F

to Adjust.

Note: The Equalizer adjustments are not operative for the 

headphones.

Press the BLUE button 

to see the STEREO Menu.

Press the Cursor UP/DOWN buttons 

E

/ 

F

to select:

Speakers matrix, Headphones matrix, AV Matrix [

] or

Identification.
The red point mark indicates the selected item.

Press the Cursor LEFT/RIGHT buttons 

C 

/

I

to change.

Select Speakers matrix to change the sound mode in the
speakers.
Select Headphones matrix to change the sound mode in the
headphones.
Select AV matrix to change the sound mode in the audio output
of the external connector (AV-1/AV-2).
Select Identification to activate (ON) or deactivate (OFF) the
automatic Identification of audio system of the current program
[

].

Press the MENU button 

● to close the STEREO Menu.

 About Matrix: Depending on the sound transmission the sound reproduction can be chosen in the STEREO Menu.
In this menu you can select a sound mode to the speakers, another to the headphones and another to the external connectors (AV-1/AV-2).
When the TV set is receiving a STEREO NICAM programme, the TV selects STEREO automatically, and you can change:

STEREO 

 MONO

When the TV is receiving a BILINGUAL NICAM programme, the TV selects DUAL CHANNEL A automatically, and you can change:

DUAL CHANNEL A 

DUAL CHANNEL B  DUAL CHANNEL A B  MONO

When the TV set is receiving a MONO NICAM programme, the TV set selects MONO NICAM automatically, and you can change:

MONO NICAM 

 MONO

When the TV is receiving a MONO FM programme, the TV set selects MONO automatically but the sound mode cannot be change.

 About Identification
IDENTIFICATION ON: The TV automatically identifies the received audio system MONO FM, STEREO NICAM or DUAL NICAM SIGNAL.
IDENTIFICATION OFF: Disqualifies the automatic identification of the audio system and forces the sound into MONO FM.
This mode can be convenient when the level of the signal received is extremely weak. This function is independent for every program.