DOWNLOAD Sharp 66GS-62 Service Manual ↓ Size: 10.35 KB | Pages: 1 in PDF or view online for FREE

•Focus ....................... High Bi-Potential Electrostatic

•Sweep Deflection ..................................... Magnetic

•Picture Intermediate frequency................... 38.9MHz

•Sound  Carrier Trap................................... 32.9MHz

•Adjacent  Sound Carrier Trap ................... 40.9MHz

•Adjacent  Picture  Carrier Trap.................. 30.9MHz

.

•Aerial Input Impedance

VHF/UHF ...................... 75 ohm Unbalanced

•Tuning Ranges........... 45.75 MHz thru 855.25 MHz

VHF: IR A-J
         S1-S41 CH (Hiperband)
UHF: E21-E69 CH

•White Level

Set brightness control to get total picture tube cathode current of 600 milliammeter under no signal
condition. Maximum necessary correction of each picture tube cathode current to get 8900 de-
grees

 

K-20 MPCD screen temperature should not exceed 15% of its original value.

The chassis in this receiver is partially hot. Use an isolation transformer between the line cord plug
and power receptacle, when servicing this chassis.
To prevent electric shock, do not remove cover. No user-serviceable parts inside. Refer servicing to
qualified service personnel.

Specifications are subject to change without prior notice.

•Power Input .................... 220V-240 Volts AC 50Hz

•Power Consumption

Normal Operation ...................................87W
Stand-by Operation ..................................3W

•Audio Power Output Rating (MPO) / Impedance

Internal Left Speaker ...................... 10W, 7

Ω

Internal Right Speaker .................... 10W, 7

Ω

•Speakers

Left / Right ...................................... 12 x 6cm

•Convergence

Static (Centre) ........ between any two colours
Dynamic ..................... after static equals zero

66GS-62H:    UK., IRELAND
66GS-62HS:  UK. Silver.