Sharp 66GS-62 (serv.man15) User Manual / Operation Manual ▷ View online
26
This function allows you to display and consult the Teletext, on the
right side of the screen, while viewing the image of the current
channel.
right side of the screen, while viewing the image of the current
channel.
The LATERAL Teletext is activated on the first click of the TEXT/MIX
button (a/b).
button (a/b).
When the LATERAL Teletext is used, the following Teletext buttons
are not available:
are not available:
● Cancel button (
k
): To cancel the Teletext information
● Upper/Lower/Full Button (
s
): To magnify the upper/lower half.
LATERAL Teletext
LATERAL Teletext
Teletext Page memory List
a) How to Operate Page Memory
Your TV has 40 teletext page number memories for fast recall of teletext information.
In programme positions 1 through 9, four teletext page numbers can be stored in each position; a total of 36 pages.
In programme positions 10 through 99, only one programme with 4 page numbers can be stored. If you try to store
more than 4 page numbers in a programme position between 10 and 99, the previously stored page numbers will be
erased.
Select the programme channel number into which you want to store teletext page numbers.
1. Press the TEXT/MIX (a/b) button to enter the teletext mode.
2. Press the LIST button to change from FLOF system to LIST mode.
3. Press a coloured button corresponding to the coloured brackets on the screen for page number storage.
4. Enter the teletext page number using the 0~9 digit buttons (enter three digits) or channel selector
Your TV has 40 teletext page number memories for fast recall of teletext information.
In programme positions 1 through 9, four teletext page numbers can be stored in each position; a total of 36 pages.
In programme positions 10 through 99, only one programme with 4 page numbers can be stored. If you try to store
more than 4 page numbers in a programme position between 10 and 99, the previously stored page numbers will be
erased.
Select the programme channel number into which you want to store teletext page numbers.
1. Press the TEXT/MIX (a/b) button to enter the teletext mode.
2. Press the LIST button to change from FLOF system to LIST mode.
3. Press a coloured button corresponding to the coloured brackets on the screen for page number storage.
4. Enter the teletext page number using the 0~9 digit buttons (enter three digits) or channel selector
/
buttons.
5. Repeat steps 3. and 4. until the numbers for the desired pages have been entered.
6. Press the STORE (
6. Press the STORE (
g) button to memorize the page numbers you require. The symbol «STORE» appears on the
screen.
7. Press the TV button to exit the teletext mode.
CH
CH
P300
(LIST TELETEXT)
400
300
200
100
P100
(FLOF TELETEXT)
Wheather
Movie
Sports
News
YELLOW
P425
400
425
200
100
If you want to store,
press button
Input
4, 2, 5
Press
LIST
and
YELLOW
buttons
LIST
Advanced TEXT operation -LIST mode-
RED
GREEN
YELLOW
CYAN
b) Fast Page Selection - LIST mode -
1. Select the appropriate programme channel.
2. Press the TEXT/MIX (a/b) button to enter the teletext mode.
3. Press the LIST button to change from FLOF system to LIST mode.
4. To recall a page number displayed in the coloured brackets, simply press the corresponding coloured button.
5. Press the LIST button (a) again to return to FLOF Mode.
2. Press the TEXT/MIX (a/b) button to enter the teletext mode.
3. Press the LIST button to change from FLOF system to LIST mode.
4. To recall a page number displayed in the coloured brackets, simply press the corresponding coloured button.
5. Press the LIST button (a) again to return to FLOF Mode.
27
21-pin Euro-SCART (RGB)
21-pin Audio/Video (AV-1) with S-Video Input
21-pin Euro-SCART and 21-pin Audio/Video
1. Audio right output
2. Audio right input
3. Audio left output
4. Common earth for audio
5. Eartth for blue
6. Audio left input
7. Blue input
2. Audio right input
3. Audio left output
4. Common earth for audio
5. Eartth for blue
6. Audio left input
7. Blue input
8. Audio-video control
9. Earth for green
9. Earth for green
10. Not used
11. Green input
12. Not used
13. Earth for red
14. Not used
11. Green input
12. Not used
13. Earth for red
14. Not used
15. Red input
16. Red/Green/Blue control
17. Earth for video
18. Earth for Red/Green/Blue control
19. Video output
20. Video input
21. Plug shield
16. Red/Green/Blue control
17. Earth for video
18. Earth for Red/Green/Blue control
19. Video output
20. Video input
21. Plug shield
1. Audio right output
2. Audio right input
3. Audio left output
4. Common earth for audio
5. Earth
6. Audio left input
7. Not used
2. Audio right input
3. Audio left output
4. Common earth for audio
5. Earth
6. Audio left input
7. Not used
8. Audio-video control
9. Earth
9. Earth
10. Not used
11. Not used
12. Not used
13. Earth
14. Not used
11. Not used
12. Not used
13. Earth
14. Not used
15. Chroma S-Video input
16. Not used
17. Earth for video
18. Earth
19. Video output
20. Video input / S-Video input
21. Plug shield
16. Not used
17. Earth for video
18. Earth
19. Video output
20. Video input / S-Video input
21. Plug shield
REAR TV
21-pin In/Out
1. 21-pin Audio/Video (AV-1)
1. 21-pin Audio/Video (AV-1)
with S-Video Input
2. 21-pin Euro SCART
(Full connect, RGB)
RF Input
3. Antenna terminal
3. Antenna terminal
2
1
3
28
Typical connection (Videorecorder/Decoder) through the 21-pin Euro-SCART
Please refer to the operation manual of your VCR for details.
RF in
RF in
VCR
RF out
SCART/AV
TV
21-pin Euro-SCART
Typical connection (Videorecorder and TV) through the RF terminal and Decoder through
the 21-pin-Euro-SCART
the 21-pin-Euro-SCART
RF in
21-pin Euro-SCART
Typical connection (DVD, Decoder and TV) through the 21-pin Euro-SCART
Decoder
Video out
Audio out
SCART/AV
TV
DVD player
Decoder
29
Quick
Service
Check List
Problems
Remote control does not work
● ●
●
●
Bars on screen
●
●
Picture distorted
●
●
●
Picture rolls vertically
●
●
●
No colour
●
●
●
●
●
Poor reception on some channels
●
●
●
●
Picture weak
●
●
●
●
●
Picture lines or streaks
●
●
●
Picture ghosting
●
●
●
●
Picture blurred
●
●
●
Sound OK, picture poor
●
●
●
●
●
●
●
Picture OK, sound poor
●
●
●
No picture or sound
●
● ● ●
●
●
● ●
Try a new channel to check
for possible station trouble
Possible Causes/Remedies
TV not plugged in Outlet power OFF
Main power button of TV not ON
Antenna not connected to terminal
at the back of the TV set
If outside antenna is used,
check for broken wires
Check for local interference
Turn OFF using the Main Power button,
then turn ON again after a minute
Adjust COLOUR control
Check batteries in the Remote Control
Try fine tuning to correct
Check if the Brightness or Contrast setting in the
picture setting mode might be all the way to the minus
side
Increase the volume
If the fault cannot be corrected by using this guide, remove the mains plug from the wall socket and contact the dealer
or supplier from whom it was purchased. Where this is not possible, please visit our web-site at
www.sharp.co.uk/support. Customers without Internet access may telephone 08705 274277 (or (01) 676 0648 if
telephoning from Ireland) during office hours.
or supplier from whom it was purchased. Where this is not possible, please visit our web-site at
www.sharp.co.uk/support. Customers without Internet access may telephone 08705 274277 (or (01) 676 0648 if
telephoning from Ireland) during office hours.
Certain replacement parts and accessories may be obtained from our Main Parts Distributor, who can be contacted on
the following numbers:
the following numbers:
Willow Vale Electronics Ltd.
0121 766 5414 and 0161 205 7531
0121 766 5414 and 0161 205 7531
In the unlikely event of this equipment requiring repair during the guarantee period, you will need to provide proof of the
date of purchase to the repairing company. Please keep your invoice or Receipt, which is supplied at the time of
purchasing.
date of purchase to the repairing company. Please keep your invoice or Receipt, which is supplied at the time of
purchasing.
Troubleshooting
