DOWNLOAD Sharp 66FW-54H (serv.man12) Service Manual ↓ Size: 2.32 MB | Pages: 52 in PDF or view online for FREE

Model
66FW-54H (serv.man12)
Pages
52
Size
2.32 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
TV / CTR
File
66fw-54h-sm12.pdf
Date

Sharp 66FW-54H (serv.man12) User Manual / Operation Manual ▷ View online

6
TV
1. Stand-by ON/OFF switch (TV)
Video
2. Power ON / OFF switch (VCR)
TV
3. Digit buttons 0 ~ 9
4. Flashback button
Teletext
5. Colour button (green)
6. Colour button (red)
TV
7. Volume DOWN/Cursor control LEFT
8. Menu button
Teletext
9. Reveal button
10. List selector
11. Store button
12. Cancel button
13. Half page button
14. Cursor button
Video
15. Rewind/picture search/reverse
16. Play button
17. Pause / Still button
18. Stop button
TV
19. TV / VIDEO selector
20. TV GUIDE button
21. Single/Double entry
Teletext
22. Colour button (yellow)
23. Colour button (cyan)
TV
24. Channel UP/Cursor control UP
25. Volume UP/Cursor control RIGHT
26. Channel DOWN/Cursor control DOWN
27. Wide Mode selector
TV /Teletext 28. Time button
TV
29. Sound mode selector
Teletext
30. Hold button
TV
31. Sound Mute button
Teletext
32. Text/Mix/Picture button
33. Index button
Video
34. Channel Up selector
35. Fast forward/picture search/forward
36. Channel Down selector
37. Record button
Remote control
See together with the pull-down page of the cover.
This TV set contains a DOLBY PRO LOGIC SURROUND DECODER.
Manufactured under license from Dolby Laboratories.
“Dolby”, the double-D symbol and “Pro Logic” are trademarks of Dolby Laboratories.
Special note
7
9
Controls & Terminals
FRONT TV
1.
Main Power On/Off Switch
2.
Power Indicator
3.
Program Selector (UP/DOWN)
4.
Volume Buttons (UP/DOWN)
5.
Remote Control Sensor
6.
O.P.C. Sensor
7.
Sound Indicator
8.
O.P.C. and Remote
Control Indicator
9.
Door
HOW TO  OPEN THE  DOOR
Press the top of the door, opening it slightly
hook your finger inside and pull open.
Behind the door
10. 
Headphone Socket (3.5 mm 
ø
/ 16~600 
B
)
11. S-Video input terminal
12. Video Input Terminal (PAL/SECAM/NTSC)
13. Audio Input Terminal (left)
14. Audio Input Terminal (right)
REAR TV
External speakers
1.
Woofer output
2.
Rear loudspeaker output (RIGHT)
3.
Rear loudspeaker output (LEFT)
4.
Front loudspeaker output (LEFT)
5.
Front loudspeaker output (RIGHT)
Note: See the technically data of external
speakers on –typical connection– (page 48).
21-pin In/Out
6.
21-pin Audio/Video (AV-2)
With PAL/SECAM/NTSC Video Input
7.
21-pin Audio/Video (AV-1)
With PAL/SECAM/NTSC/S-Video Input
and AV LINK control signal 
8.
21-pin Euro SCART (RGB) 
With PAL/SECAM/NTSC Video Input
RF Input
9.
Antenna terminal
9
8 7 6 5
4
3
2
1
OPC
1
5
4
3
2
9
8
7
6
10
11
12
13
14
STATION
REAL CHANNEL
FREQUENCY
SIGNALS
NUMBERS
MHZ
VHF
I-1 (A) ÷ I-9 (J)
CH-01 ÷ CH-09
45.75 ÷ 215.25
UHF
I-21 ÷ I-69
CH-21 ÷ CH-69
471.25 ÷ 855.25
C
M1/S1 ÷ M10/S10
CC-01 ÷ CC-10
105.25 ÷ 168.25
A
U-1/S-11 ÷ U-10/S-20
CC-11 ÷ CC-20
231.25 ÷ 294.25
T
S-21 ÷ S-41
CC-21 ÷ CC-41
303.25 ÷ 463.25
V
CC-42 ÷ CC-63
48 ÷ 304
CC-64 ÷ CC-68
69.25 ÷ 98.25
8
Power indicator
Main power button
CH
Switching on
Power supply on/off button
This TV memorizes the Mode last used when it was switched off. When the
main power button (
I
) is pressed to turn on the set, the power indicator will
light and the set will resume in either the Stand-by mode or Programme
mode, depending upon its condition when it was switched off.
On-Off/Stand-by button 
When the TV is in Stand-by mode, to turn ON the TV press the Stand-by but-
ton (
B
l
TV) on the remote control, or one of the four buttons on the TV
( Va/\, VCH/\ ). The TV will change from Stand-by mode to Programme
mode, the sound indicator will light a few moments and an image will appear
on the screen. Press the Stand-by button (
B
l
TV) again and the TV will
return to Stand-by mode.
Blue back off timer
If noise appears in TV or VCR mode, the screen turns blue. The blue back off-timer is then engaged and will automatically
switch to Stand-by mode after 15 minutes.
Real Channel Number (terrestrial/cable TV Programmes)
Channel setting is mainly performed using the remote control. Please follow the instructions with the remote control in
hand.
Television broadcasting stations have channel numbers assigned to them (real channel numbers). You can assign your
own channel number to a real channel and store it in the programme preset memory.
CORRESPONDING REAL CHANNEL
9
Auto Installation System
Your television set is provided with an Automatic Installation System which makes Installation easier.
This new system is activated when you turn on the TV for the first time.
Procedure:
1. 
Put batteries into the remote control and connect the antenna jack into the antenna input terminal on the rear of your
TV, as shown on page 4 and 5.
2. Connect the TV power cable to a 220 ~ 240 V system.
3. Press the main power button (
I
), on the right hand side of the TV
set, to start the “AUTO INSTALLATION”.
4. The red power indicator will light.
5. The “AUTO INSTALLATION” message will appear on your TV
screen.
The TV is ready to preset automatically all local channels for you.
If the TV is being used with a VCR, turn on the VCR and play back
a pre-recorded tape.
6. Now, press any button on the TV remote control and follow the
instructions on the screen, to start Auto Channel Preset.
Automatic Channel Sorting System (ACSS): The TV set SEARCHES
FOR FREQUENCIES, memorises the channels found, and sorts them
(according to technical criteria) from Pr-01 of the TV, to a maximum of
99 programmes.
Notes: This tuning process may take several minutes to perform.
IF THE TV CANNOT BE INSTALLED BY THIS METHOD, PLEASE
PHONE THE FOLLOWING NUMBER: 
0990-274277
If you need to repeat the “AUTO INSTALLATION”, please read -TV
Channel Setting- (page 32).
Stored programmes: When the AUTOMATIC SEARCH has been
completed, the "Stored programmes" Menu will appear on screen and
you can change the order of the channels and change or give the
channels a four letter name with the available options:
a) Select programme to be edited.
b) Delete this programme.
c) Go to sorting mode.
d) Edit this programme.
e) Exit.
For a more detailed explanation see page 10.
If you wish exit from the menu, press the BLUE button.
Note
It is advisable to use Pr 01, Pr 02, Pr 03 and Pr 04 for the most often used
programmes with teletext and for those which contain their own programme
information and information on other channels in the Teletext pages. For more
explanation, please go on to the section entitled TV-GUIDE.
Power indicator
Main power button
CH
Auto Installation
VCR
Automatic searching and sorting.
Press the menu button to cancel.
Page of 52
Display

Click on the first or last page to see other 66FW-54H (serv.man12) service manuals if exist.