DOWNLOAD Sharp 56FW-53H (serv.man25) Service Manual ↓ Size: 4.25 MB | Pages: 42 in PDF or view online for FREE

27

 

This feature allows the user to watch a Teletext page (in LIST mode)
on the right hand side of the screen while on the left hand side is
shown the normal TV programme.

To activate this mode, press any colour button 

when you are

watching a TV programme with Teletext information and the display
page will be memorized in LIST mode (see LIST Mode).

To exit from SPLIT SCREEN (LIST Mode) press the MENU button.

Note: If there is not TXT transmission, a black box appears.

When using SPLIT SCREEN (LIST Mode) only the following TXT buttons are active:

■ COLOUR buttons .

■ REVEAL button 

d

.

■ NUMERIC buttons 0~9.

■ CLOCK button 

f 

(Timed pages).

■ HALF page button 

s

.

■ STORE button 

g

.

■ HOLD button 

a

.

■ TEXT/MIX/PICTURE button a/b/I (TXT off).

Pressing any other button allows to return on normal TV-Mode resetting the SPLIT SCREEN (LIST Mode) feature.

Your TV has 40 Teletext page number memories for fast recall of Teletext information.
In programme positions 1 through 9, four Teletext page numbers can be stored in each position; a total of 36 pages.
In programme positions 10 through 99, only one programme with 4 page numbers can be stored. If you try to store
more than 4 page numbers in a programme position between 10 and 99, the previously stored page numbers will be
erased.

Select the programme channel number into which you want to store Teletext page numbers.

Press the TEXT/MIX/PICTURE button a/b/I twice to select the Teletext Mode.

Press the LIST button 

to change from FLOF system to LIST Mode.

Press a coloured button 

corresponding to the coloured brackets on the screen for page number storage.

Enter the Teletext page number using the 0 ~ 9 digit buttons (enter three digits).

Repeat steps 4. and 5. until the numbers for the desired pages have been entered.

Press the STORE button 

g

to memorize the page numbers you require. The symbol 

;

appears on the screen.

Press the TEXT/MIX/PICTURE button a/b/I twice to exit the Teletext Mode.

Select the appropriate programme channel.

Press the TEXT/MIX/PICTURE button a/b/I twice to select the Teletext Mode.

Press the LIST button I to change from FLOF system to LIST Mode.

To recall a page number displayed in the coloured brackets, simply press the corresponding coloured button 

.

Press the LIST button I again to return to FLOF Mode.

(FLOF TELETEXT)

Press

and

buttons

Input

S

28

In this mode you can to do again the AUTO INSTALLATION
(e.g.: after home changing).

Press the MENU button 

● to see the MAIN Menu.

Press the BLUE button 

to see the TUNE Menu.

Press the RED button 

to see the INSTALLATION Menu.

Press the RED button again 

to start the AUTO

INSTALLATION.

The AUTO INSTALLATION message will appear on your TV
screen.

Press the MENU button 

● to stop the AUTO INSTALLATION or

press any other button and follow the instructions on the screen, to
start Auto Channel Preset.

Automatic Channel Sorting System (ASS): The TV set SEARCHES
FOR FREQUENCIES, memorises the channels found, and sorts them
(according to technical criteria) from Pr-01 of the TV, to a maximum of
99 programmes.

Note: This tuning process may take several minutes to perform.

When the AUTOMATIC SEARCH has been completed, the "Stored
programmes " menu will appear on screen and you can change the
order of the channels and change or give the channels a four letter
name.
If you wish to rename the channels, or change the order; refer to the
chapter -Stored programmes- (page 8).
If you wish to go out of the menu, press the BLUE button.

Automatic searching and sorting.
Press the menu button to cancel.

29

Press the MENU button 

● to see the MAIN Menu.

Press the BLUE button 

to see the TUNE Menu.

Press the Cursor UP/DOWN buttons 

E

/

F 

to select

«Programme» (red marked).

Press the Cursor LEFT/RIGHT buttons 

C 

/

I 

(or 0 ~ 9 digit buttons)

to select the programme channel number you want to preset.

Press the Cursor UP/DOWN buttons 

E

/

F

to select «Channel

type» (red marked).

Press the Cursor LEFT/RIGHT buttons 

C 

/

I

to select “Aerial” or

“Cable”.

Press the Cursor UP/DOWN buttons 

E

/

F

to select «Channel

number» (red marked).

Press the Cursor LEFT/RIGHT buttons 

C 

/

I

(or 0 ~ 9 digit buttons) to

enter the real channel number you want to store.

Repeat the above procedure (3. ~ 8. steps) for presetting other
programme channels.

10. Press the MENU button 

● to clear the on-screen display.

Press the MENU button 

● to see the MAIN Menu.

Press the BLUE button 

to see the TUNE Menu.

Press the Cursor UP/DOWN buttons 

E

/

F

to select

«Programme» (red marked).

Press the Cursor LEFT/RIGHT buttons 

C 

/

I

(or 0 ~ 9 digit buttons) to

select the programme channel number you want to preset.

Press the Cursor UP/DOWN buttons 

E

/

F

to select «Channel

type» (red marked).

Press the Cursor LEFT/RIGHT buttons 

C 

/

I

to select “Aerial” or

“Cable”.

Press the Cursor UP/DOWN buttons 

E

/

F

to select «Search»

(red marked).

Press the Cursor LEFT/RIGHT buttons 

C 

/

I

to tune between the

existing channel and the previous/next one.

Repeat the above procedure (3. ~ 8. steps) for presetting other
programme channels.

10. Press the MENU button 

● to clear the on-screen display.

30

The following features are available for preset channels:

When a preset programme channel is not exactly tuned, you can fine tune the channel in this mode.

Press the MENU button 

● to see the MAIN Menu.

Press the BLUE button 

to see the TUNE Menu.

Press the Cursor UP/DOWN buttons 

E

/

F

to select

«Programme» (red marked).

Press the Cursor LEFT/RIGHT buttons 

C 

/

I

(or 0 ~ 9 digit buttons)

to select the programme channel number you want to tune.

Press the Cursor UP/DOWN buttons 

E

/

F

to select «fine

tune» (red marked).

Press the Cursor LEFT/RIGHT buttons 

C 

/

I

to adjust the picture

for the best quality.

Repeat the above procedure (3. ~ 6. steps) for other programme
channels as required.

Press the MENU button 

● to clear the on-screen display.

This feature allows you to select TV, FILTER, VCR or SKIP.

Press the MENU button 

● to see the MAIN Menu.

Press the blue button 

to see the TUNE Menu.

Press the Cursor UP/DOWN buttons 

E

/

F

to select

«Programme» (red marked).

Press the Cursor LEFT/RIGHT buttons 

C 

/

I

(or 0 ~ 9 digit buttons)

to select the programme channel number you want to set.

Press the Cursor UP/DOWN buttons 

E

/

F

to select

«Mode» (red marked).

Press the Cursor LEFT/RIGHT buttons 

C 

/

I

to select “TV”,

“FILTER”, “VCR” or “SKIP”.
TV:

If the TV signal is weak the image can shake.
In this case put it in TV mode.

FILTER: This mode can be convenient when the level of the signal

received is weak.

In some cases the upper part of the picture may be
distorted when receiving signal from a VCR via RF
terminal on the TV set.
Selecting this option will help to reduce this effect.

Allows you to SKIP channels you do not want to view
when using channels selector buttons 

E

/

F

.

Repeat the above procedure (3. ~ 6. steps) for other programme
channels as required.

Press the MENU button 

● to clear the on-screen display.