DOWNLOAD Sharp 32JF-73H (serv.man24) Service Manual ↓ Size: 526.99 KB | Pages: 38 in PDF or view online for FREE

7

■ Auto Installation System

Your television set is provided with an Automatic Installation System
which makes installation easier.
This new system is activated when you turn on the TV for the first
time.

Connect the antenna jack in the antenna input terminal on the
rear side of your TV set. Then connect the TV power cable to a
220 ~ 240V a.c. system.

Press the main power button 

, on the front of the TV set, and

the AUTO INSTALLATION message will appear on the screen.

Put the batteries into the remote control and follow the
instructions on the screen.

If the TV is used with a VCR, turn on the VCR and play back
a pre-recorded tape.

The TV will go through the following steps automatically and
sequentially:

Automatic Channel Sorting System (ACSS): The TV set searches for
frequencies, memorises the channels found, and sorts them
(according to technical criteria) from Pr-01 of the TV, to a maximum of
99 programmes.
This tuning system may take several minutes to perform.

Editing: When the automatic search has been completed, the list of
memorised programmes appears. In this menu, you can change the
order of the channels and change or give the channels a four letter
name.

You may not have to follow this procedure if it has already
been done for you at the establishment where you
purchased your TV. If this is the case, go on to the section
entitled Switching on (page 9).
If you need to repeat the AUTO INSTALLATION, read on.

Press the MENU button 

 to see the MAIN menu.

Press the BLUE button 

to see the TUNE menu.

Press the Channel UP button 

to select AUTO-TUNE.

Press the MENU button 

 to start the AUTO INSTALLATION.

CH

Power indicator

Main power button

VCR

8

■ Stored programmes

When the TV has finished the automatic search, the Stored
programmes menu will appear on screen with a list of the channels
which have been memorised with the available options:

a) Select programme to be edited 

/

b) Edit this program 

 RED button 

c) Go to sorting mode 

 GREEN button 

d) Delete this program 

 YELLOW button 

e) Exit this menu 

 BLUE button 

With these options, you will be able to organise the real channels (CH **)
memorised in the TV programmes (Pr 01 … Pr 99) and put them
intoyour own preferred order.

Use this option to select a programme from the list. Each time you press
the Channel UP/DOWN buttons 

/

, the memorised channel

will be viewed and will remain selected on the list by means of a white
background.

Use this option for giving a name made up of four digits to the channels or

for changing the one which appears on some channels, in the following way:

Select the channel using the Channel UP/DOWN buttons 

/

.

Press the RED button 

.

Press the Channel UP button 

to change the first letter. Letters

A to Z of the alphabet, a blank space and the numbers 0 to 9 will
appear sequentially. Some of the broadcasting stations names such
as BBC1 or ITV are already incorporated in the TV and appear
among the alphabet to make this task easier. Press the Channel
DOWN button 

to go backwards in the sequence.

Press the Volume UP button  

for changing the position of the

cursor and Channel UP/DOWN buttons  

/ 

for changing

the letters. When you have finished the fourth letter, press the 
Volume UP button  

to quit the Change of Name option.

Use this option for sorting the channels (CH) into the desired programme
(Pr), as follows:

Select the programme (Pr) you wish to change using the Channel
UP/DOWN buttons 

/ 

(marked with white background).

Press the GREEN button 

.

Press the Channel UP/DOWN buttons 

/ 

to move the

channel  (CH) to the required position.

Press the GREEN button 

to finish.

Use this option for cancelling programmes which are badly tuned or
repeated. When the YELLOW button

is pressed, the TV will ask for

confirmation that you wish to cancel, and you must press the YELLOW
button 

again. The channels that follow it on the list will automatically

rearrange themselves by moving up one programme (Pr) place, to restore
the space of the cancelled channel (CH).

Use this option to quit the menu by pressing the BLUE button

.

CH

CH

CH

CH

CH

CH

CH

CH

CH

CH

CH

CH

CH

CH

Pr 01

CH21 BBC1

Pr 02

CH31 BBC2

Pr 03

CH41 ITV

Pr 04

CH51 CH4

Pr 05

CH61 CNN

Pr 06

––––

––––

Pr 07

––––

––––

Pr 08

––––

––––

Pr 09

––––

––––

Pr 10

––––

––––

Stored programmes:

Press the MENU
button to exit.

Pr 01

CH21 BBC1

Pr 02

CH31 BBC2

Pr 03

CH41 ITV

Pr 04

CH51 CH4

Pr 05

CH61 CNN

Pr 06

––––

––––

Pr 07

––––

––––

Pr 08

––––

––––

Pr 09

––––

––––

Pr 10

––––

––––

Stored programmes:

Insert the marked
programme in the
position you wish.

Press green button to
finish.

Pr 01

CH21 BBC1

Pr 02

CH31 BBC2

Pr 03

CH41 ITV

Pr 04

CH51 CH4

Pr 05

CH61 CNN

Pr 06

––––

––––

Pr 07

––––

––––

Pr 08

––––

––––

Pr 09

––––

––––

Pr 10

––––

––––

Stored programmes:

WARNING!

This programme 

will be erased.

Press yellow button 

again to confirm.

or press any other

button to cancel.

Pr 01

CH21 BBC1

Pr 02

CH31 BBC2

Pr 03

CH41 ITV

Pr 04

CH51 CH4

Pr 05

CH61 CNN

Pr 06

––––

––––

Pr 07

––––

––––

Pr 08

––––

––––

Pr 09

––––

––––

Pr 10

––––

––––

Stored programmes:

 Edit this program
 Go to sorting mode
 Delete this program
 Exit this menu

(red)

(green)

(yellow)

(blue)

9

■ Main power

This TV memorizes the Mode last used when it was switched off. When the
main power button (

) is pressed to turn on the set, the Power indicator

will light and the set will resume in either the Stand-by mode or Programme
mode, depending upon its condition when it was switched off.

■ Stand-by button

When the TV is in Stand-by mode, to turn on the TV press the Stand-by
button (

TV) on the remote control, or one of the four buttons on the TV

(V

/\, VCH/\). The TV will change from Stand-by mode to Program

mode, the Power indicator will turn green from red and an image will
appear on the screen. Press the Stand-by button  (

TV) again and the

TV will return to Stand-by mode.

■ Blue background off timer

If weak signal conditions in TV or VCR mode, the screen will turn blue. 
The blue background off-timer is then engaged, unless a good signal is
received, the set will automatically switch to Stand-by mode after 
15 minutes.

Power indicator

Main power button

10

CHANNEL: CH (Aerial) / CC (Cable)
SEARCH (Frequency Tuning)
FINE TUNE
MODE: TV / VCR / SKIP
EDIT: Edit this program / Go to sorting mode / Delete this program/
Exit this menu
AUTO-TUNE: AUTO INSTALLATION

This TV set has a MAIN menu with four basic menus, which permit access
to the different functions of the TV.

These menus are as indicated below.

MENU button

■ By pressing the MENU button:

CONTRAST
COLOUR
BRIGHTNESS
SHARPNESS
NORMALISE
TINT CONTROL
ECO MODE
COMB FILTER
NTSC HUE

VOLUME
BASS
TREBLE
BALANCE
NORMALISE
LOUDSPEAKERS (MODE)
EFFECTS
SOUND IDENT.
DYNAMIC BASS.

ON TIMER: TIME / SWITCH ON
OFF TIMER: OFF / 120 Min. / 90 Min. / 60 Min. / 30 Min.
CHILD LOCK: LOCK ALL / LOCK PROGRAMME / CLEAR LOCK
DEMO
POST CODE

VOLUME
BASS
TREBLE
BALANCE
NORMALISE
HEADPHONES (MODE)
SOUND IDENT.

LOUDSPEAKERS

HEADPHONES

PICTURE
ADJUST-

MENTS

AUDIO

ADJUST-

MENTS

OTHER

FUNCTIONS

INSTALL

AND

TUNE

RED

GREEN

BLUE

YELLOW