Sharp 28LF-94H (serv.man4) Service Manual / Technical Bulletin ▷ View online
CTV 2005 11 02
Date of Issue: 18
th
November 2005
Classification:
White
TELEVISION TECHNICAL BULLETIN
Page 1 of 2
Sharp Electronics (UK) Limited
Reference - SP054000X
Revision - 1
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
Red – Carry out on all units
MODELS
28LF94H
SYMPTOM Intermittent reset.
CAUSE
Noise on the reset line.
ACTION
Replace R844 with a SMD jumper link. This resistor is mounted on the 100Hz PWB
Note
By shorting S723, the microprocessor can be reset. However, when R844 is replaced
by a jumper link, this will no longer be possible.
By shorting S723, the microprocessor can be reset. However, when R844 is replaced
by a jumper link, this will no longer be possible.
REF NO
DESCRIPTION
PART NUMBER
PRICE CODE
R844
SMD jumper link
V30022132
AB
Physical Location of R844
CTV 2005 11 02
Date of Issue: 18
th
November 2005
Classification:
White
TELEVISION TECHNICAL BULLETIN
Page 2 of 2
Sharp Electronics (UK) Limited
Reference - SP054000X
Revision - 1
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
Red – Carry out on all units
Schematic Location of R844
Display