DOWNLOAD Sharp 28JW-73H (serv.man33) Service Manual ↓ Size: 98.4 KB | Pages: 3 in PDF or view online for FREE

Model
28JW-73H (serv.man33)
Pages
3 Few pages! See other manuals at the bottom of the first or last page.
Size
98.4 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
TV / CTR / NVM programming Jig (revision-9)
File
28jw-73h-sm33.pdf
Date

Sharp 28JW-73H (serv.man33) Service Manual / Technical Bulletin ▷ View online

CTV2002 04 01
Month of Issue:  
May 2003
        
Classification: 
White
TELEVISION TECHNICAL BULLETIN
Page 3 of 3
Sharp Electronics (UK) Limited
Reference JR08042002-1
Revision 9
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
 Red – Carry out on all units
(c) CONNECTOR: 
link3
The parts are available from several component suppliers for example :
Farnell order number: 178278
CPC order number: SC01153
http://www.farnell.com/datasheets/14573.pdf
Please take advantage of the extra data we have provided, it will speed up your repair service and, as we are
committed to providing Data for all future models, continue to help you with each successive model.
In addition there is no reason why you will not be able to add to your own portfolio of NVM data if you extract it from
working units as you come across them.
Additional Notes :
1.  We have found it beneficial to reduce the spring tension of the clip by cutting two turns off the spring and moving
the spring closer to the pivot point of the clip.
2.  With models where 2 NVMs (Dolby Models e.g. 76FW54H) are fitted it is necessary to lift the ‘Data’ (pin5) of the
print of the second NVM. If this is not done it is possible to read the NVM but not to write (contention occurs on Data
line).
3.  With the GA-1E chassis (21HT15H) It is necessary to remove R1035 and R1033 (100R surface mount) before
successful writing can occur.
4.  With the GA20 chassis (28/32JW73H) it is necessary to remove R1036 and R1038 (100R surface mount) before
successful writing can occur.
5.   When programming NVM's on later chassis, it is important to note the supply voltage.  This is normally 3.3V, and if a
The components needed to make this jig are available in a kit.  The kit includes instructions.
REF NO
DESCRIPTION
PART NUMBER
PRICE CODE
---
Programming kit
NVM-PROG-JIG1
BC
CTV2002 04 01
Month of Issue:  
May 2003
        
Classification: 
White
TELEVISION TECHNICAL BULLETIN
Page 3 of 3
Sharp Electronics (UK) Limited
Reference JR08042002-1
Revision 9
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
 Red – Carry out on all units
(c) CONNECTOR: 
link3
The parts are available from several component suppliers for example :
Farnell order number: 178278
CPC order number: SC01153
http://www.farnell.com/datasheets/14573.pdf
Please take advantage of the extra data we have provided, it will speed up your repair service and, as we are
committed to providing Data for all future models, continue to help you with each successive model.
In addition there is no reason why you will not be able to add to your own portfolio of NVM data if you extract it from
working units as you come across them.
Additional Notes :
1.  We have found it beneficial to reduce the spring tension of the clip by cutting two turns off the spring and moving
the spring closer to the pivot point of the clip.
2.  With models where 2 NVMs (Dolby Models e.g. 76FW54H) are fitted it is necessary to lift the ‘Data’ (pin5) of the
print of the second NVM. If this is not done it is possible to read the NVM but not to write (contention occurs on Data
line).
3.  With the GA-1E chassis (21HT15H) It is necessary to remove R1035 and R1033 (100R surface mount) before
successful writing can occur.
4.  With the GA20 chassis (28/32JW73H) it is necessary to remove R1036 and R1038 (100R surface mount) before
successful writing can occur.
5.   When programming NVM's on later chassis, it is important to note the supply voltage.  This is normally 3.3V, and if a
The components needed to make this jig are available in a kit.  The kit includes instructions.
REF NO
DESCRIPTION
PART NUMBER
PRICE CODE
---
Programming kit
NVM-PROG-JIG1
BC
CTV2002 04 01
Month of Issue:  
May 2003
        
Classification: 
White
TELEVISION TECHNICAL BULLETIN
Page 3 of 3
Sharp Electronics (UK) Limited
Reference JR08042002-1
Revision 9
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
 Red – Carry out on all units
(c) CONNECTOR: 
link3
The parts are available from several component suppliers for example :
Farnell order number: 178278
CPC order number: SC01153
http://www.farnell.com/datasheets/14573.pdf
Please take advantage of the extra data we have provided, it will speed up your repair service and, as we are
committed to providing Data for all future models, continue to help you with each successive model.
In addition there is no reason why you will not be able to add to your own portfolio of NVM data if you extract it from
working units as you come across them.
Additional Notes :
1.  We have found it beneficial to reduce the spring tension of the clip by cutting two turns off the spring and moving
the spring closer to the pivot point of the clip.
2.  With models where 2 NVMs (Dolby Models e.g. 76FW54H) are fitted it is necessary to lift the ‘Data’ (pin5) of the
print of the second NVM. If this is not done it is possible to read the NVM but not to write (contention occurs on Data
line).
3.  With the GA-1E chassis (21HT15H) It is necessary to remove R1035 and R1033 (100R surface mount) before
successful writing can occur.
4.  With the GA20 chassis (28/32JW73H) it is necessary to remove R1036 and R1038 (100R surface mount) before
successful writing can occur.
5.   When programming NVM's on later chassis, it is important to note the supply voltage.  This is normally 3.3V, and if a
The components needed to make this jig are available in a kit.  The kit includes instructions.
REF NO
DESCRIPTION
PART NUMBER
PRICE CODE
---
Programming kit
NVM-PROG-JIG1
BC
CTV2002 04 01
Month of Issue:  
May 2003
        
Classification: 
White
TELEVISION TECHNICAL BULLETIN
Page 3 of 3
Sharp Electronics (UK) Limited
Reference JR08042002-1
Revision 9
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
 Red – Carry out on all units
(c) CONNECTOR: 
link3
The parts are available from several component suppliers for example :
Farnell order number: 178278
CPC order number: SC01153
http://www.farnell.com/datasheets/14573.pdf
Please take advantage of the extra data we have provided, it will speed up your repair service and, as we are
committed to providing Data for all future models, continue to help you with each successive model.
In addition there is no reason why you will not be able to add to your own portfolio of NVM data if you extract it from
working units as you come across them.
Additional Notes :
1.  We have found it beneficial to reduce the spring tension of the clip by cutting two turns off the spring and moving
the spring closer to the pivot point of the clip.
2.  With models where 2 NVMs (Dolby Models e.g. 76FW54H) are fitted it is necessary to lift the ‘Data’ (pin5) of the
print of the second NVM. If this is not done it is possible to read the NVM but not to write (contention occurs on Data
line).
3.  With the GA-1E chassis (21HT15H) It is necessary to remove R1035 and R1033 (100R surface mount) before
successful writing can occur.
4.  With the GA20 chassis (28/32JW73H) it is necessary to remove R1036 and R1038 (100R surface mount) before
successful writing can occur.
5.   When programming NVM's on later chassis, it is important to note the supply voltage.  This is normally 3.3V, and if a
The components needed to make this jig are available in a kit.  The kit includes instructions.
REF NO
DESCRIPTION
PART NUMBER
PRICE CODE
---
Programming kit
NVM-PROG-JIG1
BC
Display

Sharp 28JW-73H (serv.man33) Service Manual / Technical Bulletin ▷ Download

  • DOWNLOAD Sharp 28JW-73H (serv.man33) Service Manual ↓ Size: 98.4 KB | Pages: 3 in PDF or view online for FREE
  • Here you can View online or download the Service Manual / Technical Bulletin for the Sharp 28JW-73H (serv.man33) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp 28JW-73H (serv.man33) CTR. Information contained in Sharp 28JW-73H (serv.man33) Service Manual / Technical Bulletin (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.