DOWNLOAD Sharp 28JW-73H (serv.man22) Service Manual ↓ Size: 450.49 KB | Pages: 2 in PDF or view online for FREE

Model
28JW-73H (serv.man22)
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
450.49 KB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
TV / CTR / Quick guide
File
28jw-73h-sm22.pdf
Date
PREV: Sharp 28JW-73H (serv.man21) Service Manual / Parts Guide

Sharp 28JW-73H (serv.man22) User Manual / Operation Manual ▷ View online

1
2
The green power indicator will light.
3
The AUTO INSTALLATION message 
will appear on your TV screen followed 
by a diagram of typical connections.
Note:
If you need to repeat the AUTO 
INSTALLATION, refer to the 
relevant section on page 7 of the 
operation manual.
The AUTO INSTALLATION function will tune all available 
TV stations into your TV.
The TV is ready to preset automatically all local channels 
for you.
Fitting the batteries
1.
2.
3.
1
2
Check List:
•
Is the TV connected to the mains?
•
Is the aerial connected to the TV?
3
4
If you do not intend to use your TV with 
a VCR, proceed to stage 4.2.
1
2
Press any button on  
the remote control to  
start Auto Channel 
Preset.
This tuning process may 
take several minutes to 
perform.
3
VCR
Remote Control
R-6 (“AA” size) Dry Batteries
Operation Manual
SHARP
AUTO INSTALLATION
Be sure the antenna cable. . .
Searching,
please wait.
Pr 01
TYPICAL CONNCETIONS
2
Aerial 
(Not supplied)
Aerial Lead 
(Not supplied)
30%
Stored programmes:
Pr01
CH21
BBC1
Pr02
CH31
BBC2
Pr03
CH41
ITV
Pr04
CH51
CH4
Pr05
CH61
CNN
Pr06
----- -
----- -
Pr07
----- -
----- -
Pr08
----- -
----- -
Pr09
----- -
----- -
Pr10
----- -
----- -
Edit this program
Go to sorting mode
Delete this program
Exit this menu
(red)
(green)
(yellow)
(blue)
Back of TV
Back of TV
AUTO INSTALLATION
SUPPLIED ACCESORRIES
TYPICAL CONNECTIONS (Continued)
TURN ON TV FOR THE FIRST TIME
Press the main power button (     ) 
to start the AUTO INSTALLATION.
If the TV is used with a  
VCR, turn on the VCR 
and play back a 
pre-recorded tape.
The Stored programmes menu will appear on screen and 
you can change the order of the channels and change or 
give the channels a four-letter name.
If you wish to rename the channels, or change the order, 
refer to the page 8 chapter Stored programmes in the 
operation manual.
Press the BLUE button  
     
to exit.
28JW-73H
32JW-73H
COLOUR TELEVISION
OPERATION MANUAL
PRINTED ON ENVIRONMENTALLY FRIENDLY PAPER
With your thumb 
neil, pull up the 
slit as shown.
Insert the two 
batteries as shown.
Replace the cover.
Mains Socket Outlet 
AC 220~240 V, 50 Hz
TV set
Power indicator
Main power button
A SCART lead (not supplied) is recommended for use with this TV, to 
obtain the best communication between your TV and VCR, refer 
to page 32 of the operation manual.
Press any button on
the handset to start.
1
2
The green power indicator will light.
3
The AUTO INSTALLATION message 
will appear on your TV screen followed 
by a diagram of typical connections.
Note:
If you need to repeat the AUTO 
INSTALLATION, refer to the 
relevant section on page 7 of the 
operation manual.
The AUTO INSTALLATION function will tune all available 
TV stations into your TV.
The TV is ready to preset automatically all local channels 
for you.
Fitting the batteries
1.
2.
3.
1
2
Check List:
•
Is the TV connected to the mains?
•
Is the aerial connected to the TV?
3
4
If you do not intend to use your TV with 
a VCR, proceed to stage 4.2.
1
2
Press any button on  
the remote control to  
start Auto Channel 
Preset.
This tuning process may 
take several minutes to 
perform.
3
VCR
Remote Control
R-6 (“AA” size) Dry Batteries
Operation Manual
SHARP
AUTO INSTALLATION
Be sure the antenna cable. . .
Searching,
please wait.
Pr 01
TYPICAL CONNCETIONS
2
Aerial 
(Not supplied)
Aerial Lead 
(Not supplied)
30%
Stored programmes:
Pr01
CH21
BBC1
Pr02
CH31
BBC2
Pr03
CH41
ITV
Pr04
CH51
CH4
Pr05
CH61
CNN
Pr06
----- -
----- -
Pr07
----- -
----- -
Pr08
----- -
----- -
Pr09
----- -
----- -
Pr10
----- -
----- -
Edit this program
Go to sorting mode
Delete this program
Exit this menu
(red)
(green)
(yellow)
(blue)
Back of TV
Back of TV
AUTO INSTALLATION
SUPPLIED ACCESORRIES
TYPICAL CONNECTIONS (Continued)
TURN ON TV FOR THE FIRST TIME
Press the main power button (     ) 
to start the AUTO INSTALLATION.
If the TV is used with a  
VCR, turn on the VCR 
and play back a 
pre-recorded tape.
The Stored programmes menu will appear on screen and 
you can change the order of the channels and change or 
give the channels a four-letter name.
If you wish to rename the channels, or change the order, 
refer to the page 8 chapter Stored programmes in the 
operation manual.
Press the BLUE button  
     
to exit.
28JW-73H
32JW-73H
COLOUR TELEVISION
OPERATION MANUAL
PRINTED ON ENVIRONMENTALLY FRIENDLY PAPER
With your thumb 
neil, pull up the 
slit as shown.
Insert the two 
batteries as shown.
Replace the cover.
Mains Socket Outlet 
AC 220~240 V, 50 Hz
TV set
Power indicator
Main power button
A SCART lead (not supplied) is recommended for use with this TV, to 
obtain the best communication between your TV and VCR, refer 
to page 32 of the operation manual.
Press any button on
the handset to start.
1
2
The green power indicator will light.
3
The AUTO INSTALLATION message 
will appear on your TV screen followed 
by a diagram of typical connections.
Note:
If you need to repeat the AUTO 
INSTALLATION, refer to the 
relevant section on page 7 of the 
operation manual.
The AUTO INSTALLATION function will tune all available 
TV stations into your TV.
The TV is ready to preset automatically all local channels 
for you.
Fitting the batteries
1.
2.
3.
1
2
Check List:
•
Is the TV connected to the mains?
•
Is the aerial connected to the TV?
3
4
If you do not intend to use your TV with 
a VCR, proceed to stage 4.2.
1
2
Press any button on  
the remote control to  
start Auto Channel 
Preset.
This tuning process may 
take several minutes to 
perform.
3
VCR
Remote Control
R-6 (“AA” size) Dry Batteries
Operation Manual
SHARP
AUTO INSTALLATION
Be sure the antenna cable. . .
Searching,
please wait.
Pr 01
TYPICAL CONNCETIONS
2
Aerial 
(Not supplied)
Aerial Lead 
(Not supplied)
30%
Stored programmes:
Pr01
CH21
BBC1
Pr02
CH31
BBC2
Pr03
CH41
ITV
Pr04
CH51
CH4
Pr05
CH61
CNN
Pr06
----- -
----- -
Pr07
----- -
----- -
Pr08
----- -
----- -
Pr09
----- -
----- -
Pr10
----- -
----- -
Edit this program
Go to sorting mode
Delete this program
Exit this menu
(red)
(green)
(yellow)
(blue)
Back of TV
Back of TV
AUTO INSTALLATION
SUPPLIED ACCESORRIES
TYPICAL CONNECTIONS (Continued)
TURN ON TV FOR THE FIRST TIME
Press the main power button (     ) 
to start the AUTO INSTALLATION.
If the TV is used with a  
VCR, turn on the VCR 
and play back a 
pre-recorded tape.
The Stored programmes menu will appear on screen and 
you can change the order of the channels and change or 
give the channels a four-letter name.
If you wish to rename the channels, or change the order, 
refer to the page 8 chapter Stored programmes in the 
operation manual.
Press the BLUE button  
     
to exit.
28JW-73H
32JW-73H
COLOUR TELEVISION
OPERATION MANUAL
PRINTED ON ENVIRONMENTALLY FRIENDLY PAPER
With your thumb 
neil, pull up the 
slit as shown.
Insert the two 
batteries as shown.
Replace the cover.
Mains Socket Outlet 
AC 220~240 V, 50 Hz
TV set
Power indicator
Main power button
A SCART lead (not supplied) is recommended for use with this TV, to 
obtain the best communication between your TV and VCR, refer 
to page 32 of the operation manual.
Press any button on
the handset to start.
1
2
The green power indicator will light.
3
The AUTO INSTALLATION message 
will appear on your TV screen followed 
by a diagram of typical connections.
Note:
If you need to repeat the AUTO 
INSTALLATION, refer to the 
relevant section on page 7 of the 
operation manual.
The AUTO INSTALLATION function will tune all available 
TV stations into your TV.
The TV is ready to preset automatically all local channels 
for you.
Fitting the batteries
1.
2.
3.
1
2
Check List:
•
Is the TV connected to the mains?
•
Is the aerial connected to the TV?
3
4
If you do not intend to use your TV with 
a VCR, proceed to stage 4.2.
1
2
Press any button on  
the remote control to  
start Auto Channel 
Preset.
This tuning process may 
take several minutes to 
perform.
3
VCR
Remote Control
R-6 (“AA” size) Dry Batteries
Operation Manual
SHARP
AUTO INSTALLATION
Be sure the antenna cable. . .
Searching,
please wait.
Pr 01
TYPICAL CONNCETIONS
2
Aerial 
(Not supplied)
Aerial Lead 
(Not supplied)
30%
Stored programmes:
Pr01
CH21
BBC1
Pr02
CH31
BBC2
Pr03
CH41
ITV
Pr04
CH51
CH4
Pr05
CH61
CNN
Pr06
----- -
----- -
Pr07
----- -
----- -
Pr08
----- -
----- -
Pr09
----- -
----- -
Pr10
----- -
----- -
Edit this program
Go to sorting mode
Delete this program
Exit this menu
(red)
(green)
(yellow)
(blue)
Back of TV
Back of TV
AUTO INSTALLATION
SUPPLIED ACCESORRIES
TYPICAL CONNECTIONS (Continued)
TURN ON TV FOR THE FIRST TIME
Press the main power button (     ) 
to start the AUTO INSTALLATION.
If the TV is used with a  
VCR, turn on the VCR 
and play back a 
pre-recorded tape.
The Stored programmes menu will appear on screen and 
you can change the order of the channels and change or 
give the channels a four-letter name.
If you wish to rename the channels, or change the order, 
refer to the page 8 chapter Stored programmes in the 
operation manual.
Press the BLUE button  
     
to exit.
28JW-73H
32JW-73H
COLOUR TELEVISION
OPERATION MANUAL
PRINTED ON ENVIRONMENTALLY FRIENDLY PAPER
With your thumb 
neil, pull up the 
slit as shown.
Insert the two 
batteries as shown.
Replace the cover.
Mains Socket Outlet 
AC 220~240 V, 50 Hz
TV set
Power indicator
Main power button
A SCART lead (not supplied) is recommended for use with this TV, to 
obtain the best communication between your TV and VCR, refer 
to page 32 of the operation manual.
Press any button on
the handset to start.
Display

Sharp 28JW-73H (serv.man22) User Manual / Operation Manual ▷ Download

  • DOWNLOAD Sharp 28JW-73H (serv.man22) Service Manual ↓ Size: 450.49 KB | Pages: 2 in PDF or view online for FREE
  • Here you can View online or download the User Manual / Operation Manual for the Sharp 28JW-73H (serv.man22) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp 28JW-73H (serv.man22) CTR. Information contained in Sharp 28JW-73H (serv.man22) User Manual / Operation Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.

Found More:

28JW-73H (serv.man22) Service Manuals

Preview DownloadPagesSize
28JW-73H (serv.man2) GA20 Chassis Training Notes Service Manual 40 2.38 MB
28JW-73H (serv.man20) Packing of set, accessories and documentation (p.61-64) Service Manual 4 263.6 KB
28JW-73H (serv.man19) Troubleshooting tables (p.52-54) Service Manual 4 55.65 KB
28JW-73H (serv.man18) Main PWB schematic for Philips CRT Version Service Manual 1 841.28 KB
28JW-73H (serv.man17) CRT base PWB for Philips CRT Version Service Manual 1 369.87 KB
28JW-73H (serv.man16) Schematic diagrams for Thompson CRT part 4(p.45-48) Service Manual 4 641.51 KB
28JW-73H (serv.man15) Schematic diagrams for Thompson CRT part 3(p.42-44) Service Manual 3 802.15 KB
28JW-73H (serv.man14) Schematic diagrams for Thompson CRT part 2(p.39-41) Service Manual 2 1.28 MB
28JW-73H (serv.man13) Schematic diagrams part 1(p.36-38) Service Manual 3 228.57 KB
28JW-73H (serv.man12) IC's additional info part 3(p.31-35) Service Manual 5 51.52 KB
28JW-73H (serv.man11) IC's additional info part 2(p.26-30) Service Manual 5 86.92 KB
28JW-73H (serv.man10) Chassis layout (p.19-20) Service Manual 2 81.47 KB
28JW-73H (serv.man9) Printed wiring board diagrams part 3 (p.17-18) Service Manual 2 740.72 KB
28JW-73H (serv.man8) Printed wiring board diagrams part 2 (p.15-16) Service Manual 2 1.47 MB
28JW-73H (serv.man7) Printed wiring board diagrams part 1 (p.13-14) Service Manual 2 789.3 KB
28JW-73H (serv.man6) Adjustment procedures, postcode reset and LED flashing codes (p.7-12) Service Manual 6 138.2 KB
28JW-73H (serv.man5) Servicing notes, controls and terminals(p.4-6) Service Manual 3 169.43 KB
28JW-73H (serv.man4) Contents (p.1-2) Service Manual 2 132.24 KB
28JW-73H (serv.man3) Alternative Degaussing Circuit Diagram (R745 removed) Service Manual 1 95.35 KB
28JW-73H (serv.man23) User Manual / Operation Manual 38 526.97 KB
28JW-73H (serv.man42) NVM data (24645) device type Firmware 1.01 KB
28JW-73H (serv.man41) NVM data for Philips CRT (24C64 NVM) Firmware 1.42 KB
28JW-73H (serv.man21) Parts listings (p.52-60) Service Manual / Parts Guide 9 316.11 KB
28JW-73H Electrical specification (p.3) Service Manual / Specification 1 25.03 KB
28JW-73H (serv.man33) NVM programming Jig (revision-9) Service Manual / Technical Bulletin 3 98.4 KB
28JW-73H (serv.man40) Receiver takes a long time to start up or starts up intermittently Service Manual / Technical Bulletin 1 281.52 KB
28JW-73H (serv.man39) Part number for Mains Lead Cord Grip Service Manual / Technical Bulletin 1 9.02 KB
28JW-73H (serv.man38) NVM - MTP - CRT matrix Service Manual / Technical Bulletin 1 6.67 KB
28JW-73H (serv.man37) C617 may overheat due to poor electrical connection Service Manual / Technical Bulletin 1 9.32 KB
28JW-73H (serv.man36) No sync via input signal Service Manual / Technical Bulletin 1 8.8 KB
28JW-73H (serv.man35) Set dead due to faulty IC701 and D755 short circuit Service Manual / Technical Bulletin 1 46.09 KB
28JW-73H (serv.man34) CTV2002 11 04 (Revision 2)- Philips CRT version Service Manual / Technical Bulletin 1 60.94 KB
28JW-73H (serv.man24) Dead. Set 'chirps' Service Manual / Technical Bulletin 1 14.36 KB
28JW-73H (serv.man32) Alternative Q702 (revision 2) Service Manual / Technical Bulletin 2 178.69 KB
28JW-73H (serv.man31) Dead or intermittent dead Service Manual / Technical Bulletin 1 7.06 KB
28JW-73H (serv.man30) Additional Beam Current Sensing Circuit Service Manual / Technical Bulletin 3 91.52 KB
28JW-73H (serv.man29) Intermittent tripping phosphor burn Service Manual / Technical Bulletin 1 33.87 KB
28JW-73H (serv.man28) Dead (failure of R512, C607, etc) Service Manual / Technical Bulletin 1 5.76 KB
28JW-73H (serv.man27) EHT but no picture Service Manual / Technical Bulletin 1 4.8 KB
28JW-73H (serv.man26) Stuck in standby (red LED only) Service Manual / Technical Bulletin 1 54.13 KB
28JW-73H (serv.man25) No or intermittent audio Service Manual / Technical Bulletin 1 1.3 MB

RANDOM: