DOWNLOAD Sharp 28HW-53 (serv.man11) Service Manual ↓ Size: 954.21 KB | Pages: 42 in PDF or view online for FREE

Model
28HW-53 (serv.man11)
Pages
42
Size
954.21 KB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
TV / CTR
File
28hw-53-sm11.pdf
Date

Sharp 28HW-53 (serv.man11) User Manual / Operation Manual ▷ View online

5
TV
1. Stand-by ON/OFF switch (TV)
Video
2. Power ON / OFF switch (VCR)
TV
3. Digit buttons 0 ~ 9
4. Flashback button
Teletext
5. Colour button (green)
6. Colour button (red)
TV
7. Volume DOWN/Cursor control LEFT
8. Menu button
Teletext
9. Reveal button
10. List selector
11. Store button
12. Cancel button
13. Half page button
TV
14. Sub-titles button
Video
15. Rewind/picture search/reverse
16. Play button
17. Pause / Still button
18. Stop button
TV
19. TV / VIDEO selector
20. Call button
21. Single/Double entry
Teletext
22. Colour button (yellow)
23. Colour button (cyan)
TV
24. Channel UP/Cursor control UP
25. Volume UP/Cursor control RIGHT
26. Channel DOWN/Cursor control DOWN
27. Wide Mode selector
TV /Teletext 28. Time button
TV
29. Sound mode selector
Teletext
30. Hold button
TV
31. Sound Mute button
Teletext
32. Text/Mix/Picture button
33. Index button
Video
34. Channel Up selector
35. Fast forward/picture search/forward
36. Channel Down selector
37. Record button
Remote control
1.
19.
23.
21.
24.
25.
26.
27.
28.
29.
30.
31.
32.
34.
37.
36.
35.
33.
22.
20.
4.
5.
6.
7.
8.
10.
11.
12.
13.
15.
18.
17.
16.
14.
9.
2.
3.
6
Controls & Terminals
FRONT TV
1.
Main Power On/Off Switch
2.
Power Indicator
3.
Remote Control Sensor
4.
Volume Button (DOWN)
5.
Volume Button (UP)
6.
Program Selector (DOWN)
7.
Program Selector (UP)
8.
Door
HOW TO  OPEN THE  DOOR
Press the top of the door, opening it slightly
hook your finger inside and pull open.
Behind the door
9. Headphone Socket (3.5mm / 16~600 ohms)
10. S-Video input terminal
11. Video Input Terminal (PAL/SECAM/NTSC)
12. Audio Input Terminal (left)
13. Audio Input Terminal (right)
REAR TV
21-pin In/Out
1.
21-pin Audio/Video (AV-2)
With PAL/SECAM/NTSC Video Input
2.
21-pin Audio/Video (AV-1)
With PAL/SECAM/NTSC/S-Video Input 
3.
21-pin Euro SCART (RGB) 
With PAL/SECAM/NTSC Video Input
RF Input
4.
Aerial terminal
1
10
11
3
2
4 5 6 7
8
12
13
9
7
STATION
REAL CHANNEL
FREQUENCY
SIGNALS
NUMBERS
MHZ
VHF
I-1 (A) > I-9 (J)
CH-01 > CH-09
45.75 > 215.25
UHF
I-21 > I-69
CH-21 > CH-69
471.25 > 855.25
C
M1/S1 > M10/S10
CC-01 > CC-10
105.25 > 168.25
A
U-1/S-11 > U-10/S-20
CC-11 > CC-20
231.25 > 294.25
T
S-21 > S-41
CC-21 > CC-41
303.25 > 463.25
V
CC-42 > CC-63
48 > 304
CC-64 > CC-68
69.25 > 98.25
Switching on
Power supply on/off button
This TV memorises the Mode last used when it was switched off. When the
main power button (
I
) is pressed to turn on the set, the power indicator will
light and the set will resume in either the Stand-by mode or Programme
mode, depending upon its condition when it was switched off. 
On-Off/Stand-by button 
When the TV is on Stand-by mode, to turn ON the TV press the Stand-by
button (
B
l
TV) on the remote control, or one of the four buttons on the TV
( Va/\, VCH/\ ). The TV will change from Stand-by mode to Program
Mode, the sound indicator will light a few moments and an image will appear
on the screen. Press the Stand-by button (
B
l
TV) again and the TV will
return to Stand-by mode.
Blue back off timer
If noise appears in TV or VCR mode, the screen turns blue. The blue back off-timer is then engaged and will automati-
cally switch the set to Stand-by mode in 15 minutes.
Real Channel Number (terrestrial/cable TV Programmes)
Channel setting is mainly performed using the remote control. Please follow the instructions with the remote control in
hand.
Television broadcasting stations have channel numbers assigned to them (real channel numbers). You can assign your
own channel number to a real channel and store it in the programme preset memory.
CORRESPONDING REAL CHANNEL
Power indicator
Main power button
8
Auto Installation System
Your television set is provided with an Automatic Installation System which makes Installation easier.
This new system is activated when you turn on the TV for the first time.
Procedure:
1. 
Put batteries into the remote control and connect the antenna jack in the antenna input terminal on the rear side of
your TV-set, same as indicated on -Quick reference Guide- page 3.
2. Connect the TV power cable to a 220 ~ 240 V system.
3. Press the main power button (
I
), on the front of the TV, to start
the “AUTO INSTALLATION”.
4. The red power indicator will light.
5. The “AUTO INSTALLATION” message will appear on your TV
screen.
The TV is ready to preset automatically all local channels for you.
If the TV is being used with a VCR, turn on the VCR and play back
a pre-recorded tape.
6. Now, press any button on the TV remote control and follow the
instructions on the screen, to start Auto Channel Preset.
Automatic Channel Sorting System (ACSS): The TV set SEARCHES
FOR FREQUENCIES, memorises the channels found, and sorts them
(according to technical criteria) from Pr-01 of the TV, to a maximum of
99 programmes.
Notes: This tuning process may take several minutes to perform.
If you need to repeat the “AUTO INSTALLATION”, read on-TV Channel
Setting- (page 28).
Stored programmes: When the AUTOMATIC SEARCH has been
completed, the "Stored programmes" Menu will appear on screen and
you can change the order of the channels and change or give the
channels a four letter name with the available options:
a) Select programme to be edited.
b) Delete this programme.
c) go to sorting mode.
d) Edit this programme.
e) Exit.
For a more detailed explanation see page 9.
If you wish exit from the menu, press the BLUE button.
Auto Installation
VCR
Automatic searching and sorting.
Press the menu button to cancel.
Power indicator
Main power button
Page of 42
Display

Click on the first or last page to see other 28HW-53 (serv.man11) service manuals if exist.