DOWNLOAD Sharp XV-Z91E (serv.man8) Service Manual ↓ Size: 24.55 KB | Pages: 1 in PDF or view online for FREE

Model
XV-Z91E (serv.man8)
Pages
1 Few pages! See other manuals at the bottom of the first or last page.
Size
24.55 KB
Type
PDF
Document
Service Manual
Brand
Device
Projector / Resetting the total lamp timer
File
xv-z91e-sm8.pdf
Date

Sharp XV-Z91E (serv.man8) Service Manual ▷ View online

15
XV-Z90E
RESETTING THE TOTAL  LAMP TIMER
You need to reset the lamp timer every time you replace the lamp and confirm it is reset on the
“Lamp Timer” menu.
How to reset the total lamp timer.
1. Plug the power cord
2. Press POWER ON on the projec-
tor to reset the lamp timer.
“LAMP 0000H” is displayed on the
screen.
Maintenance Indicators
TEMPERATURE
WARNING
indicator
LAMP
REPLACEMENT
indicator
POWER
indicator
TEMP.
LAMP
POWER
• The warning lights on the projector indicate problems
inside the projector.
• There are two types of warning lights: a TEMPERATURE
WARNING indicator that warns you when the projector
is too hot, and a LAMP REPLACEMENT indicator that
warns you when to change the lamp.
• If a problem occurs, either the TEMPERATURE WARN-
ING indicator or the LAMP REPLACEMENT indicator
will illuminate in red. After turning off the power, follow
the procedures given below.
Maintenance Indicator
TEMPERATURE WARN-
ING indicator
LAMP REPLACEMENT
indicator
Condition
The internal tempera-
ture is abnormally high.
The lamp does not light
up.
The lamp requires re-
placement.
Problem
• Blocked air intake.
• Clogged ventilative hole.
• Cooling fan breakdown.
• Internal circuit failure.
• Burnt-out lamp.
• Lamp circuit failure.
• Lamp has been used for over
2,400 hours.
Possible Solution
• Relocate the projector to an area with proper ventila-
tion.
• Clean the ventilative holes.
• Take the projector to your nearest Authorized
SharpVision Service Center or Dealer for repair.
• Carefully replace the lamp.
• Take the projector to your nearest Authorized
SharpVision Service Center or Dealer for repair.
• If the TEMPERATURE WARNING indicator lights up, follow the above possible solutions and then wait until the
projector has cooled down completely before turning the power back on. (At least 5 minutes.)
• If the power is turned off and then turned on again, for example during a brief rest, the  may be triggered,
preventing the power from going on. Should this occur, unplug the power cord from the wall outlet and plug it
back in again.
Display

Sharp XV-Z91E (serv.man8) Service Manual ▷ Download

  • DOWNLOAD Sharp XV-Z91E (serv.man8) Service Manual ↓ Size: 24.55 KB | Pages: 1 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sharp XV-Z91E (serv.man8) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp XV-Z91E (serv.man8) Projector. Information contained in Sharp XV-Z91E (serv.man8) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.