Sharp XV-Z90E (serv.man30) User Manual / Operation Manual ▷ View online
Appendix
-55
327
153.8
118
368
Dimensions
Units: mm
Front View
Bottom View
Side View
Top View
Side View
Rear View
Appendix
-56
Specifications
Product type
Model
Video system
Display method
DLP panel
Lens
Projection lamp
Video input signal
S-video input signal
Component input signal
(INPUT 1)
Component input signal
(INPUT 2)
Component RGB input signal
(INPUT 2)
Horizontal resolution
RGB input signal
Pixel clock
Vertical frequency
Horizontal frequency
Computer control signal
Rated voltage
Input current
Rated frequency
Power consumption
Heat dissipation
Operating temperature
Storage temperature
Cabinet
I/R carrier frequency
Dimensions (approx.)
Weight (approx.)
Supplied accessories
Replacement parts
Projector
XV-Z90E
PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC 4.43
DTV 480
XV-Z90E
PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC 4.43
DTV 480
I
/480P/720P/1080
I
DLP chip, RGB optical shutter method
Panel size: 0.55
Panel size: 0.55
Display method: Single Panel Digital Micromirror Device (DMD™) by Texas Instruments
Drive method: Digital Light Processing (DLP™)
No. of dots: 480,000 dots (800 [H]
Drive method: Digital Light Processing (DLP™)
No. of dots: 480,000 dots (800 [H]
600 [V])
1–1.2
zoom lens, F3.0, f=32.5–44.0 mm
150 W SHP lamp
RCA Connector: VIDEO (INPUT 4), composite video, 1.0 Vp-p, sync negative, 75
RCA Connector: VIDEO (INPUT 4), composite video, 1.0 Vp-p, sync negative, 75
Ω
terminated
4-pin Mini DIN connector (INPUT 3)
Y (luminance signal): 1.0 Vp-p, sync negative, 75
4-pin Mini DIN connector (INPUT 3)
Y (luminance signal): 1.0 Vp-p, sync negative, 75
Ω terminated
C (chrominance signal): Burst 0.286 Vp-p, 75
Ω terminated
RCA Connector
Y: 1.0 Vp-p, sync negative, 75
Y: 1.0 Vp-p, sync negative, 75
Ω terminated
P
B
: 0.7 Vp-p, 75
Ω terminated
P
R
: 0.7 Vp-p, 75
Ω terminated
15-pin connector
Analog 0.7 Vp-p 75
Analog 0.7 Vp-p 75
Ω
Y: 1.0 Vp-p, sync negative, 75
Ω terminated
P
B
: 0.7 Vp-p, 75
Ω terminated
P
R
: 0.7 Vp-p, 75
Ω terminated
15-pin connector
RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75
RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75
Ω terminated
HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
VERTICAL SYNC. SIGNAL: Same as above
520 TV lines (NTSC 3.58 input)
15-
VERTICAL SYNC. SIGNAL: Same as above
520 TV lines (NTSC 3.58 input)
15-
PIN
MINI
D-
SUB
CONNECTOR
(INPUT 2):
RGB separate/composite sync/sync on green type analog input: 0–0.7 Vp-p, positive,
75
75
Ω terminated
H
ORIZONTAL
SYNC
.
SIGNAL
: TTL level (positive/negative) or composite sync (Apple only)
V
ERTICAL
SYNC
.
SIGNAL
: Same as above
12–110 MHz
43–75 Hz
15–70 kHz
9-pin D-sub connector (RS-232C Port)
AC 100–240 V
2.1 A
50/60 Hz
200 W
750 BTU/hour
43–75 Hz
15–70 kHz
9-pin D-sub connector (RS-232C Port)
AC 100–240 V
2.1 A
50/60 Hz
200 W
750 BTU/hour
5°C to 35°C
20°C to 60°C
Plastic
38 kHz
368 (W)
Plastic
38 kHz
368 (W)
153.8 (H) 327 (D) mm (including swivel stand)
368 (W)
118 (H) 327 (D) mm (main body only)
4.3 kg (including swivel stand)
3.8kg (main body only)
Remote control, Two AA size batteries, Power cord, Computer RGB cable, 21 pin RCA
conversion adaptor, Video cable, Terminal cover, Screws for terminal cover, Lens cap
(attached on the body), Lens cap strap, Operation manual
Lamp unit (Lamp/cage module) (BQC-XVZ90+++1), Remote control (RRMCGA099WJSA),
AA size batteries, Power cord for Europe except U.K. (QACCV4002CEZZ), Power cord for
U.K., Hong Kong and Singapore (QACCBA012WJPZ), Power cord for Australia and New
Zealand (QACCL3022CEZZ), Computer RGB cable (QCNW-5050CEZZ), 21 pin RCA
conversion adaptor (QSOCZ0361CEZZ), Video cable (QCNWGA001WJZZ), Terminal cover
(GCOVAA116WJKA), Screws for terminal cover (XBBSN40P10000), Lens cap
(CCAPHA004WJ01), Lens cap strap (UBNDT0013CEZZ), Operation manuals; for
European 7 languages (TINS-A326WJZZ) / for Chinese, Korean and Arabic (TINS-
A327WJZZ)
3.8kg (main body only)
Remote control, Two AA size batteries, Power cord, Computer RGB cable, 21 pin RCA
conversion adaptor, Video cable, Terminal cover, Screws for terminal cover, Lens cap
(attached on the body), Lens cap strap, Operation manual
Lamp unit (Lamp/cage module) (BQC-XVZ90+++1), Remote control (RRMCGA099WJSA),
AA size batteries, Power cord for Europe except U.K. (QACCV4002CEZZ), Power cord for
U.K., Hong Kong and Singapore (QACCBA012WJPZ), Power cord for Australia and New
Zealand (QACCL3022CEZZ), Computer RGB cable (QCNW-5050CEZZ), 21 pin RCA
conversion adaptor (QSOCZ0361CEZZ), Video cable (QCNWGA001WJZZ), Terminal cover
(GCOVAA116WJKA), Screws for terminal cover (XBBSN40P10000), Lens cap
(CCAPHA004WJ01), Lens cap strap (UBNDT0013CEZZ), Operation manuals; for
European 7 languages (TINS-A326WJZZ) / for Chinese, Korean and Arabic (TINS-
A327WJZZ)
This SHARP projector uses a DMD chip. This very sophisticated chip contains 480,000 pixels. As with any high technology electronic equipment
such as large screen TVs, video systems and video cameras, there are certain acceptable tolerances that the equipment must conform to.
such as large screen TVs, video systems and video cameras, there are certain acceptable tolerances that the equipment must conform to.
Specifications are subject to change without notice.
Appendix
-57
Glossary
Aspect ratio
Width and height ratio of an image. The normal aspect ratio of a computer and video image is 4 : 3. There are also wide images with an aspect ratio of 16 : 9
and 21 : 9.
and 21 : 9.
Auto Sync
Optimises projected computer images by automatically adjusting certain characteristics.
Background
Initial setting image projected when no signal is being input.
Clock
Clock adjustment is used to adjust vertical noise when clock level is incorrect.
CLR Temp (Colour temperature)
Function that can be used to adjust the colour temperature to suit the type of image input to the projector. Decrease the colour temperature to create warmer,
reddish images for natural flesh tones, or increase to create cooler, bluish images for a brighter picture.
reddish images for natural flesh tones, or increase to create cooler, bluish images for a brighter picture.
Composite sync
Signal combining horizontal and vertical sync pulses.
Digital keystone correction
Function to digitally correct a distorted image when the projector is set up at an angle, smoothes out jaggies on keystone images and compresses the image
not only horizontally but vertically keeping the 4 : 3 aspect ratio.
not only horizontally but vertically keeping the 4 : 3 aspect ratio.
Digital shift
Shifts image up or down easily by
/
buttons when RESIZE mode of input image is NORMAL, BORDER, or STRETCH of COMPUTER, VIDEO and DTV
inputs.
GAMMA
Image quality enhancement function that offers a richer image by brightening the darker portions of the image without altering the brightness of the brighter
portions. You can select from four different modes: Standard, Black Detail, White Detail and Brighten.
portions. You can select from four different modes: Standard, Black Detail, White Detail and Brighten.
Intelligent compression and expansion
High quality resizing of lower and higher resolution images to fit the projector’s native resolution.
Phase
Phase shift is a timing shift between isomorphic signals with the same resolution. When phase level is incorrect, the projected image typically displays horizontal
flicker.
flicker.
RESIZE
Allows you to modify or customize the picture display mode to enhance the input image. You can select from four different modes: NORMAL, FULL, BORDER
and STRETCH.
and STRETCH.
RS-232C
Function to control the projector from the computer by using the RS-232C ports on the projector and computer.
Stretch
Mode that stretches the 4:3 image horizontally to display it on the wide screen.
Sync on green
Video signal mode of a computer which overlaps horizontal and vertical sync signal to green colour signal pin.
Appendix
-58
Index
A
AC socket .......................................................................... 12
ADJUSTMENT buttons ...................................................... 19
Adjusting the Picture ......................................................... 29
Aspect ratio ....................................................................... 24
Automatic power shut-off function .................................... 41
Auto sync adjustment ....................................................... 35
AUTO SYNC button ........................................................... 35
ADJUSTMENT buttons ...................................................... 19
Adjusting the Picture ......................................................... 29
Aspect ratio ....................................................................... 24
Automatic power shut-off function .................................... 41
Auto sync adjustment ....................................................... 35
AUTO SYNC button ........................................................... 35
B
Background ...................................................................... 37
C
Ceiling-mount .................................................................... 22
Clock ................................................................................. 33
COMPONENT terminals .................................................... 13
Clock ................................................................................. 33
COMPONENT terminals .................................................... 13
D
Digital shift ........................................................................ 38
E
ENTER button ................................................................... 26
Exhaust ventilative hole ...................................................... 4
Exhaust ventilative hole ...................................................... 4
F
Focus ring ......................................................................... 16
I
INPUT buttons ................................................................... 24
INPUT 2 COMPONENT/RGB port ..................................... 51
Intake ventilative hole ........................................................ 49
INPUT 2 COMPONENT/RGB port ..................................... 51
Intake ventilative hole ........................................................ 49
K
Kensington Lock ............................................................... 50
KEYSTONE button ............................................................ 19
KEYSTONE button ............................................................ 19
L
LAMP REPLACEMENT indicator ....................................... 44
Lens shift ........................................................................... 18
Lens cap ............................................................................. 9
LIGHT button ..................................................................... 15
Lens shift ........................................................................... 18
Lens cap ............................................................................. 9
LIGHT button ..................................................................... 15
M
MENU button ..................................................................... 26
O
On-screen display ............................................................. 36
On-screen display Language ........................................... 42
On-screen display Language ........................................... 42
P
Phase ................................................................................ 33
PICTURE SETTING button ................................................ 32
POWER buttons ................................................................ 16
Power cord ........................................................................ 12
POWER indicator .............................................................. 44
PICTURE SETTING button ................................................ 32
POWER buttons ................................................................ 16
Power cord ........................................................................ 12
POWER indicator .............................................................. 44
R
Rear+Ceiling ..................................................................... 42
Rear projection .................................................................. 23
Remote control .................................................................. 10
Remote control sensor ...................................................... 15
Remote control signal transmitter ..................................... 10
RESIZE button ................................................................... 24
RGB/COMP. button ........................................................... 36
RS-232C port .................................................................... 51
Rear projection .................................................................. 23
Remote control .................................................................. 10
Remote control sensor ...................................................... 15
Remote control signal transmitter ..................................... 10
RESIZE button ................................................................... 24
RGB/COMP. button ........................................................... 36
RS-232C port .................................................................... 51
S
STRETCH .......................................................................... 24
Subtitle .............................................................................. 39
S-VIDEO INPUT terminal ................................................... 12
Sync .................................................................................. 35
Sync on green ................................................................... 54
Swivel Stand LOCK/UNLOCK lever .................................. 17
Subtitle .............................................................................. 39
S-VIDEO INPUT terminal ................................................... 12
Sync .................................................................................. 35
Sync on green ................................................................... 54
Swivel Stand LOCK/UNLOCK lever .................................. 17
T
TEMPERATURE WARNING indicator ................................ 44
U
UNDO button .................................................................... 26
V
VIDEO INPUT terminal ...................................................... 12
Video System .................................................................... 37
Video System .................................................................... 37
Z
Zoom knob ........................................................................ 16
Click on the first or last page to see other XV-Z90E (serv.man30) service manuals if exist.