DOWNLOAD Sharp XV-Z90E (serv.man28) Service Manual ↓ Size: 1.88 MB | Pages: 18 in PDF or view online for FREE

2, 3

1, 4

You can adjust the projector’s picture to your prefer-
ences with the following picture settings. To save the
settings, select a memory from 1 to 5 and OFF (see
page 32) and then adjust the settings.

For less contrast
For less brightness

For less colour intensity

Skin tones become purplish

For less sharpness

For weaker red
For weaker blue

For more contrast
For more brightness

For more colour intensity

Skin tones become greenish

For more sharpness

For stronger red
For stronger blue

For selecting a desired item from six colour temperature
settings
For selecting a desired item from four gamma positions
For switching “on” or “off” the function that emphasizes
bright portions of the image
For storing all items set in “Picture”
All image adjustment items are returned to the factory
preset settings.

1

2

• “Color”, “Tint” and “Sharp” do not appear for RGB input in

INPUT 2 mode.

• For details on “Gamma”, see “Gamma Correction

Function” on page 31.

• For details on “CLR Temp”, see “Adjusting the Colour

Temperature” on page 30.

• For details on “White Emphasis”, see “Description of

White Emphasis” on page 30.

• For details on “Picture Setting”, see “Picture Setting

Function” on page 32.

1 Press MENU. The “Picture” menu screen appears.

2 Press  /   to select a specific adjustment item.

3 Press  /  to move the   mark of the selected

adjustment item to the desired setting.

4 To exit the menu screen, press MENU.

• To reset all adjustment items, select “Reset” on the “Picture”

menu screen and press ENTER.

• “Tint” cannot be used with PAL, SECAM, PAL-M, PAL-N or

PAL-60.

This function allows for selecting the desired colour
temperature from six settings. With the lower value
selected, the projected image becomes warmer,
reddish and incandescent-like while with the higher
value, the image becomes cooler, bluish and
fluorescent-like.

1 Press MENU. The “Picture” menu screen appears.

2 Press  /  to select “CLR Temp”, and then press

.

3 Press 

/

 to select the desired colour

temperature setting.

4 Press ENTER to save the setting.

5 To exit the menu screen, press MENU.

• Values on “CLR Temp” are only for general standard

purposes. The less the value is set to, the warmer, reddish,
incandescent-like the image becomes. The more the value
is set to, the cooler, bluish, fluorescent-like the image
becomes.

2, 3

4

1, 5

This function emphasizes the bright portions of images
to obtain a higher contrast image.

1 Press MENU. The “Picture” menu screen appears.

2 Press  /  to select “White Emphasis”.

3 Press  /  to select the desired white emphasis

setting.

4 To exit the menu screen, press MENU.

1, 4

2, 3

For emphasizing the bright portions of images

For disabling “White Emphasis”

Gamma is an image quality enhancement function.
Four gamma settings are available to allow for
differences in the brightness of the room.

Standard picture without gamma correction

Gives greater depth to darker portions of
images for a more exciting theatre experience.

Emphasizes the gradation of the intermediate to
high brightness portions of the image for more
detailed expression.

Brighten the darker portions of images for easier
viewing in a dimly lit room.

1 Press MENU. The “Picture” menu screen appears.

2 Press  /  to select “Gamma”, and then press

.

3 Press  /  to select the desired gamma mode.

4 Press ENTER to save the setting.

5 To exit the menu screen, press MENU.

2, 3

4

1, 5

This function stores all items set in “Picture”. Five
settings can be stored separately in “Memory 1” to
“Memory 5”. Each stored setting is reassigned to each
input mode (INPUT 1 to INPUT 4).
Even when the input mode or signal is changed, you
can easily select optimal settings from the stored
settings.

• This function can be operated using the PICTURE SETTING

button on the projector or on the remote control, as well as
the OSD menu screen.

Settings of all items in “Picture” can be stored for
the respective input modes. The stored settings
can be selected in any input modes.

Besides “Memory 1” to “Memory 5”, other settings

can be stored for each input mode. “Memory OFF”
can be selected for each input mode.

1 Press PICTURE SETTING. Each time PICTURE

SETTING is pressed, the memory number
changes as shown below.

Memory 1

Memory 2

Memory 3

Memory OFF

Memory 5

Memory 4

1 Press MENU. The “Picture” menu screen

appears.

2 Press  /  to select “Picture Setting”, and then

press 

.

3 Press  /  to select the desired memory number

for the picture settings.

4 Press  ENTER to save the settings. Adjust the

settings described on pages 29 to 31. The values
that are adjusted are stored.

5 To exit the menu screen, press MENU.

1

2, 3

4

1, 5