Sharp XV-Z90E (serv.man10) Service Manual ▷ View online
27
XV-Z90E
Input the Component signal from INPUT 1.
Select INPUT 1 with the keys on the main body or the
remote control.
Select INPUT 1 with the keys on the main body or the
remote control.
Check IC3102 and around it.
Are IC3102 (76) (77) (78)
outputting and the signals inputted
to (73) (74) (75)?
outputting and the signals inputted
to (73) (74) (75)?
Is the picture disturbed?
Is picture outputted?
Is the signal coming to the
connector TD?
connector TD?
Yes
No
Check of the Terminal 2 PWB.
No
No
Yes
No
Yes
Is the picture signal coming to
IC3102 (3) (4) (5)?
IC3102 (3) (4) (5)?
Check between the connector TD
and IC3102.
and IC3102.
No
Yes
Yes
Check of component 15 pin D-sub
input
input
End.
1
4
28
XV-Z90E
Checking of Sync Signal
Is the horizontal synchronized
signal on IC5001 (6) pin?
signal on IC5001 (6) pin?
Is the vertical synchronized signal
on IC5002 (6) pin?
on IC5002 (6) pin?
Is the synchronized signal is
outputted from IC5009, IC5005,
IC5006, IC5007, IC5008?
outputted from IC5009, IC5005,
IC5006, IC5007, IC5008?
Are the timing of both vertical and
horizontal synchronized signals
correct?
horizontal synchronized signals
correct?
Is the horizontal synchronized
signal on IC6004 (30) pin?
signal on IC6004 (30) pin?
Is the vertical synchronized signal
on IC6004 (31) pin?
on IC6004 (31) pin?
The sync signal is normal.
End of checking.
End of checking.
Yes
No
Check the PWB of the signal input
part.
part.
No
Yes
Yes
Yes
Yes
No
Yes
Check each IC and the peripheral
circuit of IC.
circuit of IC.
No
Check IC6001, IC6002 and IC
peripheral circuits.
peripheral circuits.
No
Set the signal source appropriately.
No
2
Is the signal generator (input
source) correct?
source) correct?
Yes
IC8001 and its periphery is
defective.
defective.
No
Is the horizontal synchronized
signal on IC6004 (66) pin?
signal on IC6004 (66) pin?
Is the vertical synchronized signal
on IC6004 (64) pin?
on IC6004 (64) pin?
Yes
Yes
No
Failure of IC6004 and IC
peripheral circuit.
peripheral circuit.
No
29
XV-Z90E
»
Formatter Unit Troubleshooting -1/2
Abnormal picture
No
Yes
Rainbow-like colors on-
screen.
No proper matching in
red, green and blue.
screen.
No proper matching in
red, green and blue.
Adjustments made on
"PROCESS MENU"
"PROCESS MENU"
→
"DLP"
→
"INDEX", but
correction impossible.
Blackout
Are connections made
properly with the
SC9101 and SC9001
sockets?
properly with the
SC9101 and SC9001
sockets?
Is the color wheel
running?
running?
IC9101, IC9102 or their
peripheral circuit, or
color wheel defective.
peripheral circuit, or
color wheel defective.
Thick, white vertical
stripes (flashing).
stripes (flashing).
No
Others
IC9003, IC9004, IC9006
or their peripheral circuit
defective.
or their peripheral circuit
defective.
Is connection made
properly with the
SC9001 socket?
properly with the
SC9001 socket?
No
Is the voltage at pin (3)
of IC9007 as specified
(+2.5V)?
of IC9007 as specified
(+2.5V)?
Yes
Yes
Are there 400-MHz
sine-wave signals at
pins (18) and (20) of
IC9001?
sine-wave signals at
pins (18) and (20) of
IC9001?
Are there dust deposits on
DMD, formatter board and
cLGA contact terminal?
DMD, formatter board and
cLGA contact terminal?
No
Refit the DMD, optical
mechanism and formatter
board PWB.
mechanism and formatter
board PWB.
Yes
IC9001 or its peripheral
circuit defective.
circuit defective.
Yes
No
No
Is the specified voltage
applied to the P9002
connector?
applied to the P9002
connector?
Yes
IC9003 and/or IC9004
defective.
defective.
Check the main PWB
and power unit.
and power unit.
Yes
No
Is the voltage at the
positive-polarity pin of
C9308 as specified
(+5V)?
positive-polarity pin of
C9308 as specified
(+5V)?
Yes
IC9301 or its peripheral
circuit defective.
circuit defective.
No
Is there 150-Hz pulse
signal at pin (2) of
P9003 with no signal
input?
signal at pin (2) of
P9003 with no signal
input?
Yes
Check the color wheel
sensor PWB.
sensor PWB.
No
Is the voltage at pin (9)
of IC9301 as specified
(+23 to +26V)?
of IC9301 as specified
(+23 to +26V)?
Yes
No
Is the voltage at pin (13)
of IC9301 as specified
(-26V)?
of IC9301 as specified
(-26V)?
Yes
IC9301 or its peripheral
circuit defective.
circuit defective.
No
Is the voltage at pin (49)
of IC9301 as specified
(+7V)?
of IC9301 as specified
(+7V)?
Yes
No
Is a lamp turned on?
Yes
5
6
30
XV-Z90E
»
Formatter Unit Troubleshooting-2/2
No
IC9301 or its peripheral
circuit defective.
circuit defective.
Is there 60-MHz pulse
signal at TP9025?
signal at TP9025?
Is the voltage at pin (1)
of the P2002 main PWB
at high level?
of the P2002 main PWB
at high level?
IC2007, IC2002 or their
peripheral circuit
defective.
peripheral circuit
defective.
Is the P2002 connector
properly connected?
properly connected?
No
Is the specified voltage
applied to the CN1001
connector?
applied to the CN1001
connector?
Yes
Yes
Is the fan running?
Check the ballast unit and
power unit.
power unit.
Check the fan circuit.
Yes
No
No
6
5
Click on the first or last page to see other XV-Z90E (serv.man10) service manuals if exist.