Sharp XV-Z3100 (serv.man11) User Manual / Operation Manual ▷ View online
XV-Z3100U/XV-Z3100/XV-Z3300/DT-510
1 – 5
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Insert the batteries making sure the polarities correctly match the
Replace only with the same or equivalent type.
Insert the batteries making sure the polarities correctly match the
and
marks inside the battery
compartment.
Batteries of different types have different properties, therefore do not mix batteries of different types.
Do not mix new and old batteries.
This may shorten the life of new batteries or may cause old batteries to leak.
Remove the batteries from the remote control once they have run out, as leaving them in can cause them
to leak.
Battery fluid from leaked batteries is harmful to skin, therefore ensure you wipe them first and then remove
them using a cloth.
Batteries of different types have different properties, therefore do not mix batteries of different types.
Do not mix new and old batteries.
This may shorten the life of new batteries or may cause old batteries to leak.
Remove the batteries from the remote control once they have run out, as leaving them in can cause them
to leak.
Battery fluid from leaked batteries is harmful to skin, therefore ensure you wipe them first and then remove
them using a cloth.
The batteries included with this projector may run down in a short period, depending on how they are kept.
Be sure to replace them as soon as possible with new batteries.
Remove the batteries from the remote control if you will not be using the remote control for a long time.
Comply with the rules (ordinance) of each local government when disposing of worn-out batteries.
Be sure to replace them as soon as possible with new batteries.
Remove the batteries from the remote control if you will not be using the remote control for a long time.
Comply with the rules (ordinance) of each local government when disposing of worn-out batteries.
Incorrect use of the batteries may cause them to leak or explode. Please
follow the precautions below.
follow the precautions below.
Inserting the Batteries
Attach the cover and slide it until it clicks
into place.
into place.
Insert the batteries.
Insert the batteries making sure the polarities
correctly match the
correctly match the
and
marks inside the
battery compartment.
Press the mark on the cover and slide it
in the direction of the arrow.
in the direction of the arrow.
1
2
3
Caution
XV-Z3100U/XV-Z3100/XV-Z3300/DT-510
1 – 6
Connecting Pin Assignments
COMPUTER-RGB Input
COMPUTER-RGB/COMPONENT INPUT5 Terminal: 15-pin Mini D-sub female connector
1.
Video input (red)
2.
Video input (green/sync on green)
3.
Video input (blue)
4.
Not connected
5.
Not connected
6.
Earth (red)
7.
Earth (green/sync on green)
8.
Earth (blue)
9.
Not connected
10. GND
11. Not connected
12. Bi-directional data
13. Horizontal sync signal: TTL level
14. Vertical sync signal: TTL level
15. Data clock
11. Not connected
12. Bi-directional data
13. Horizontal sync signal: TTL level
14. Vertical sync signal: TTL level
15. Data clock
RS-232C Terminal: 9-pin Mini DIN female connector
Component Input
5
10
15
1
11
6
1.
P
R
(C
R
)
2.
Y
3.
P
B
(C
B
)
4.
Not connected
5.
Not connected
6.
Earth (P
R
)
7.
Earth (Y)
8.
Earth (P
B
)
9.
Not connected
10. Not connected
11. Not connected
12. Not connected
13. Not connected
14. Not connected
15. Not connected
11. Not connected
12. Not connected
13. Not connected
14. Not connected
15. Not connected
RD
SD
SD
SG
RS
CS
CS
Signal
Name
8
9
6
5
2
1
4
3
7
Pin No.
1.
2.
3.
4.
5.
6.
7.
8.
9.
2.
3.
4.
5.
6.
7.
8.
9.
I/O
Reference
Not connected
Connected to internal circuit
Connected to internal circuit
Not connected
Connected to internal circuit
Not connected
Connected to CS in internal circuit
Connected to RS in internal circuit
Not connected
Connected to internal circuit
Connected to internal circuit
Not connected
Connected to internal circuit
Not connected
Connected to CS in internal circuit
Connected to RS in internal circuit
Not connected
Receive Data
Send Data
Send Data
Signal Ground
Request to Send
Clear to Send
Clear to Send
Input
Output
Output
RS-232C Terminal: 9-pin D-sub male connector of the DIN-D-sub RS-232C adaptor
(optional accessory: AN-A1RS)
(optional accessory: AN-A1RS)
RD
SD
SD
SG
RS
CS
CS
Signal
Name
Pin No.
1.
2.
3.
4.
5.
6.
7.
8.
9.
2.
3.
4.
5.
6.
7.
8.
9.
I/O
Reference
Not connected
Connected to internal circuit
Connected to internal circuit
Not connected
Connected to internal circuit
Not connected
Connected to CS in internal circuit
Connected to RS in internal circuit
Not connected
Connected to internal circuit
Connected to internal circuit
Not connected
Connected to internal circuit
Not connected
Connected to CS in internal circuit
Connected to RS in internal circuit
Not connected
Receive Data
Send Data
Send Data
Signal Ground
Request to Send
Clear to Send
Clear to Send
Input
Output
Output
1
5
6
9
CD
RD
SD
ER
SG
DR
RS
CS
CI
RD
SD
ER
SG
DR
RS
CS
CI
Signal
Pin No.
1.
2.
3.
4.
5.
6.
7.
8.
9.
2.
3.
4.
5.
6.
7.
8.
9.
RS-232C Cable recommended connection: 9-pin D-sub female connector
CD
RD
SD
ER
SG
DR
RS
CS
CI
RD
SD
ER
SG
DR
RS
CS
CI
Signal
Pin No.
1.
2.
3.
4.
5.
6.
7.
8.
9.
2.
3.
4.
5.
6.
7.
8.
9.
5
1
9
6
• Depending on the controlling device used, it may be necessary to connect Pin 4 and Pin 6 on the
controlling device (e.g. computer).
Note
Projector
Pin No.
4
5
6
5
6
Computer
Pin No.
4
5
6
5
6
1
19
2
18
HDMI Terminal
Name
Pin No.
1.
2.
3.
4.
5.
6.
7.
2.
3.
4.
5.
6.
7.
TMDS Data2+
TMDS Data2 Shield
TMDS Data2-
TMDS Data1+
TMDS Data1 Shield
TMDS Data1-
TMDS Data0+
TMDS Data2 Shield
TMDS Data2-
TMDS Data1+
TMDS Data1 Shield
TMDS Data1-
TMDS Data0+
Name
Pin No.
TMDS Data0 Shield
TMDS Data0-
TMDS Clock+
TMDS Clock Shield
TMDS Clock-
CEC
TMDS Data0-
TMDS Clock+
TMDS Clock Shield
TMDS Clock-
CEC
8.
9.
9.
10.
11.
12.
13.
11.
12.
13.
Name
Pin No.
Reserved
SCL
SDA
DDC/CEC Ground
+5V Power
Hot Plug Detect
SCL
SDA
DDC/CEC Ground
+5V Power
Hot Plug Detect
14.
15.
16.
17.
18.
19.
15.
16.
17.
18.
19.
XV-Z3100U/XV-Z3100/XV-Z3300/DT-510
1 – 7
[3] DIMENSIONS
Units: inches (mm)
12
13
/
32
(
315)
3
1
/
16
(
77.5)
2
19
/
32
(
65.5)
1
53
/
64
(
46.2)
3
5
/
32
(
80)
1
55
/
64
(
47)
2
7
/
8
(
73)
2
61
/
64
(
75)
1
11
/
32
(
33.8)
4
19
/
64
(
109)
1
7
/
8
(
47.5)
4
7
/
64
(
104)
7
/
16
(
11)
11
1
/
32
(
280)
23
/
64
(
9)
13
/
64
(
5)
7
/
16
(
11)
φ
9
7
/
64
(
69.2)
XV-Z3100U/XV-Z3100/XV-Z3300/DT-510
1 – 8
[4] Regarding the lamp
Regarding the Lamp
Lamp
ı It is recommended that the lamp (sold separately) be replaced when the remaining lamp life becomes
5% or less, or when you notice a significant deterioration in the picture and color quality. The lamp life
(percentage) can be checked with the on-screen display.
(percentage) can be checked with the on-screen display.
ı Purchase a replacement lamp of type AN-XR10L2 from your place of purchase, nearest Sharp
Authorized Service Center or Dealer.
Caution Concerning the Lamp
This projector utilizes a pressurized mercury lamp. A loud sound may indicate lamp failure. Lamp
failure can be attributed to numerous sources such as: excessive shock, improper cooling, surface
scratches or deterioration of the lamp due to a lapse of usage time.
The period of time up to failure largely varies depending on the individual lamp and/or the condition
and the frequency of use. It is important to note that failure can often result in the bulb cracking.
failure can be attributed to numerous sources such as: excessive shock, improper cooling, surface
scratches or deterioration of the lamp due to a lapse of usage time.
The period of time up to failure largely varies depending on the individual lamp and/or the condition
and the frequency of use. It is important to note that failure can often result in the bulb cracking.
ı When the lamp replacement indicator and on-screen display icon are illuminated, it is recommended
that the lamp be replaced with a new one immediately, even if the lamp appears to be operating
normally.
normally.
ı Should the lamp break, there is also a possibility that glass particles may spread inside of the
projector. In such a case, it is recommended you contact your nearest Sharp Authorized Service
Center or Dealer to assure safe operation.
Center or Dealer to assure safe operation.
ı Should the lamp break, the glass particles may spread inside the lamp cage or gas contained in the
lamp may be vented into the room from the exhaust vent. Because the gas in this lamp includes
mercury, ventilate the room well if the lamp breaks and avoid all exposure to the released gas. In case
of exposure to the gas, consult a doctor as soon as possible.
mercury, ventilate the room well if the lamp breaks and avoid all exposure to the released gas. In case
of exposure to the gas, consult a doctor as soon as possible.
Replacing the Lamp
Do not remove the lamp unit from the projector right after use. The lamp will be very hot and may
cause burn or injury.
cause burn or injury.
ı Carefully change the lamp by following the instructions described in this section. * If you wish,
you may have the lamp replaced at your nearest Sharp Authorized Service Center or Dealer.
* If the new lamp does not light after replacement, take your projector to the nearest Sharp Authorized
Service Center or Dealer for repair.
IMPORTANT NOTE TO U.S. CUSTOMERS:
The lamp included with this projector is backed by a 90-day parts and labor limited
warranty. All service of this projector under warranty, including lamp replacement,
must be obtained through a Sharp Authorized Service Center or Dealer. For the
name of the nearest Sharp Authorized Service Center or Dealer, please call toll-
free: 1-888-GO-SHARP (1-888-467-4277).
The lamp included with this projector is backed by a 90-day parts and labor limited
warranty. All service of this projector under warranty, including lamp replacement,
must be obtained through a Sharp Authorized Service Center or Dealer. For the
name of the nearest Sharp Authorized Service Center or Dealer, please call toll-
free: 1-888-GO-SHARP (1-888-467-4277).
Hg LAMP CONTAINS MERCURY For State Lamp Disposal
Information
www.lamprecycle.org or 1-800-BE-SHARP
Information
www.lamprecycle.org or 1-800-BE-SHARP
U.S.A. ONLY
Click on the first or last page to see other XV-Z3100 (serv.man11) service manuals if exist.