XV-Z21000 (serv.man7). Removal of major parts — Sharp Projector Service Manual (repair manual)

Model
XV-Z21000 (serv.man7)
Pages
7
Size
623.3 KB
Type
PDF
Document
Service Manual
Brand
Device
Projector / Removal of major parts
File
xv-z21000-sm7.pdf
Date

View Sharp XV-Z21000 (serv.man7) Service Manual online

XV-Z20000/XV-Z21000/DT-5000
2 – 1
XV-Z20000
Service Manual
 
CHAPTER 2. 
REMOVING OF MAJOR PARTS
[1] Removing the Top body
1. Remove the six lock screws.
2. Press on side Arrow A of the Bottom body and lift the Rear of the Top body.
3. Disconnect the connector.
4. Press on front Arrow B of the Bottom body and unhook the claws, and detach the Top body.
5. Remove the two screws and detach the LED PWB.
6. Remove the one screw and detach the R/C Rear PWB.
7. remove the three screws and detach the Operation PWB.
R/C Rear PWB
Operation
PWB
LED PWB
Top body
XV-Z20000/XV-Z21000/DT-5000
2 – 2
[2] Removing the Fans and PWB Unit Assembly
1. Disconnect the fourteen connectors.
2. Remove the two screws and detach the Lamp socket.
3. Remove the three screws and detach the Intake duct (upper). Detach the two Fans.
4. Remove the four screws and detach the PWB Unit Assembly.
5. Remove the three screws and detach the Intake duct (lower).
2-1
2-1
2-1
2-1
2-1
Intak
duct
(upper)
Fan
Fan
Intake duct
(lower)
2-2
2-3
2-5
2-5
2-5
2-4
[TB]
P9702
XV-Z20000/XV-Z21000/DT-5000
2 – 3
[3] Removing the Rear panel assembly, PC I/F PWB and the Main PWB
1. Remove the three screw.
2. Remove the two screws.
3. Remove the two screws.
4. Remove the four hexagonal supports and detach the Rear panel assembly.
5. Remove the four screws and detach the PC I/F assembly.
6. Remove the two screws and remove the four socket, and detach the shields.
7. Remove the one connector.
8. Remove the three screws and remove the two hexagonal supports.
9. Remove the one hook and detach the Main PWB.
3-5
3-6
3-7
3-8
3-8
3-9
3-1
3-2
3-3
3-4
3-4
PC I/F PWB
Rear panel assembly
hook
hook
lower shield
Upper shield
Socket
Socket
Main PWB
XV-Z20000/XV-Z21000/DT-5000
2 – 4
[4] Precaution on Mounting the PC I/F PWB
1. Insert the lower shield into the power supply unit.
2. Align the PC I/F PWB with the socket on the main PWB, and securely connect them by pressing the 3 socket sections from above.
3. Fit the upper shield to the lower shield.
NOTE: (1) You must pay attention to the fitting direction of the upper and lower shields (both sides). (Figures 1 and 2)
(2) The upper shield on the terminal side must not be placed on the PWB. (Figure 3)
4.  Install the 2 screws (3-6).
5. Install the 4 screws (3-5).
The upper shield must be located the outer side.
The lower shield must be located
the outer side.
Upper shield
Lower shield
Figure 1
Hook
Hook
The lower shield must be located the outer side.
Upper shield
Lower shield
Hook
Hook
The upper shield must be located the outer side.
Figure 2
PC I/F PWB
Upper Shield
The upper shield must not be
placed on the PWB.
Figure 3
Page of 7
Display

Download Sharp XV-Z21000 (serv.man7) Service Manual (Repair Manual)

Here you can view online or download Sharp XV-Z21000 (serv.man7) Service Manual in pdf. This Service Manual can help you recover, restore, fix, disassemble and repair Sharp XV-Z21000 (serv.man7) Projector. Information contained in Sharp XV-Z21000 (serv.man7) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).