DOWNLOAD Sharp XV-Z10E (serv.man26) Service Manual ↓ Size: 9.41 MB | Pages: 127 in PDF or view online for FREE

In the interests of user-safety (Required by safety regulations in some countries) the set should be re-
stored to its original condition and only parts identical to those specified should be used.

Im lnteresse der Benutzersicherheit (erforderliche Sicherheitsregeln in einigen Ländern) muß das Gerät in seinen
Originalzustand  gebracht werden.  Außerdem dürfen für die spezifizierten Bauteile nur identische Teile verwendet
werden.

SY3M3XV-Z10E/

Page

Page

Seite

Seite

• SPECIFICATIONS ............................................. 3

• IMPORTANT SERVICE SAFETY

NOTES .............................................................. 4

• NOTE TO SERVICE PERSONNEL ................... 5

• OPERATION MANUAL ..................................... 9

• DIMENSIONS ................................................. 17

• REMOVING OF MAJOR PARTS ..................... 18

• RESETTING THE TOTAL LAMP TIMER ......... 22

• THE OPTICAL UNIT OUTLINE ...................... 23

• ELECTRICAL ADJUSTMENT ......................... 25

• TROUBLE SHOOTING TABLE ....................... 34

• CHASSIS LAYOUT .......................................... 74

• BLOCK DIAGRAM .......................................... 76

• OVERALL WIRING DIAGRAM ........................ 78

• DESCRIPTION OF SCHEMATIC

DIAGRAM ....................................................... 80

• WAVEFORMS ................................................. 81

• SCHEMATIC DIAGRAM .................................. 82

• PRINTED WIRING BOARD ASSEMBLIES ... 110

• PARTS LIST

Ë 

ELECTRICAL PARTS ............................... 116

Ë 

CABINET AND MECHANICAL PARTS .... 128

Ë

 ACCESSORIES PARTS ............................ 132

Ë

 PACKING PARTS ...................................... 132

• PACKING OF THE SET ................................ 133

• TECHNISCHE DATEN .................................... 40

• HINWEISE FÜR DAS

WARTUNGSPERSONAL ................................ 41

• BEDIENUNGSANLEITUNG ............................ 43

• ABMESSUNGEN ............................................ 51

• ENTFERNEN DER HAUPTTEILE .................. 52

• RÜCKSTELLEN DES LAMPEN-TIMERS ....... 56

• BESCHREIBUNG DER OPTIK-INHEIT .......... 57

• ELEKTRISCHE EINSTELLUNG ..................... 59

• FEHLERSUCHTABELLE ................................ 68

• CHASSIS-ANORDNUNG ............................... 74

• BLOCKSCHALTBILD ...................................... 76

• GESAMTSCHALTPLAN .................................. 78

• BESCHREIBUNG DES SCHEMATISCHEN

SCHALTPLANS .............................................. 80

• WELLENFORMEN .......................................... 81

• SCHEMATISCHER SCHALTPLAN ................. 82

• LEITERPLATTENEINHEITEN ....................... 110

• ERSATZTEILLISTE

Ë

 ELEKTRISCHE BAUTEILE ....................... 116

Ë

 GEHÄUSE UND MECHANISCHE

    BAUTEILE ................................................. 128

Ë

 ZUBEHÖRTEILE ....................................... 132

Ë

 VERPACKUNGSTEILE ............................. 132

• VERPACKEN DES GERÄTS ........................ 133

Projector
XV-Z10E
NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/
DTV480

I

/DTV480P/DTV540P/DTV580

I

/DTV580P/DTV720P/DTV1035

I

/DTV1080

I

/

DTV1080

I

-50

LCD panel 

×

 3, RGB optical shutter method

Panel size: 0.54" (6.766 [H] 

×

 12.012 [W] mm)

No. of dots:  409,920 dots (854 [H] 

×

 480 [V])

1–1.25

×

 zoom lens, F1.6–1.9, f = 16.8–20.9 mm

130 W AC lamp
15-pin D-sub connector
Y: 1.0 Vp-p, sync negative, 75 

Ω

 terminated

P

B

: 0.7 Vp-p, 75 

Ω

 terminated

P

R

: 0.7 Vp-p, 75 

Ω

 terminated

520 TV lines (DTV720P)
15-pin D-sub connector
RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75 

Ω

 terminated

HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
VERTICAL SYNC. SIGNAL: Same as above
4-pin DIN connector
Y (luminance signal): 1.0 Vp-p, sync negative, 75 

Ω

 terminated

C (chrominance signal): Burst 0.286 Vp-p, 75 

Ω

 terminated

RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 

Ω

terminated
9-pin D-sub male connector
12–80 MHz
43–75 Hz
24–70 kHz
ø3.5 mm minijack: AUDIO, 0.5 Vrms, more than 22 k

Ω

 (stereo)

1.0 W (monaural)
2.8 cm round 

×

 1

AC 100–240 V
1.9 A
50/60 Hz
185 W (Standard mode)/170 W (Eco mode) with AC 100 V
175 W (Standard mode)/160 W (Eco mode) with AC 240 V
4 W (AC 100 V) – 6 W (AC 240 V)
695 BTU/hour (Standard mode)/640 BTU/hour (Eco mode) with AC 100 V
660 BTU/hour (Standard mode)/600 BTU/hour (Eco mode) with AC 240 V
+5

°

C to +35

°

C

–20

°

C to +60

°

C

Plastic
38 kHz
294 (W) 

×

 92 (H) 

×

 234.5 (D) mm (main body only)

2.7 kg
Remote control, Two AA size batteries, Power cord, Video cable, Three RCA adapter plugs,
3 RCA to 15-pin D-sub cable, 21 pin RCA conversion adapter (for Europe), Lens cap (at-
tached), Extra air filter, Lens shipping block (attached), Operation manual
Lamp unit (Lamp/cage module) (BQC-PGB10S//1), Remote control (RRMCGA220WJSA),
Batteries (“AA” size), Power cord for Europe, except U.K. (QACCVA006WJPZ), Power cord
for U.K., Hong Kong and Singapore (QACCBA015WJPZ), Power cord for Australia, New
Zealand and Oceania (QACCLA005WJPZ), Video cable (QCNWGA001WJZZ), RCA adapter
plugs (QPLGJA002WJZZ), 3 RCA to 15-pin D-sub cable (QCNWGA043WJPZ), 21 pin RCA
conversion adapter (QSOCZ0361CEZZ), Lens cap (CCAPHA004WJ01), Air filter
(PFILDA010WJZZ), Lens shipping block (SPAKXA333WJZZ), Operation manuals; for  Euro-
pean 7 languages (TINS-B021WJZZ) / for Chinese, Korean and Arabic (TINS-B082WJZZ)

Product type

Model

Video system

Display method

LCD panel

Lens

Projection lamp

Component input signal

(INPUT1)

Horizontal resolution

Computer RGB input

signal (INPUT 1)

S-video input signal

(INPUT 2)

Video input signal

(INPUT 3)

Computer control signal (RS-232C)

Pixel clock

Vertical frequency

Horizontal frequency

Audio input signal

Audio output

Speaker system

Rated voltage

Input current

Rated frequency

Power consumption

Power consumption (standby)

Heat dissipation

Operating temperature

Storage temperature

Cabinet

I/R carrier frequency

Dimensions (approx.)

Weight (approx.)

Supplied accessories

Replacement parts

As a part of policy of continuous improvement, SHARP reserves the right to make design
and specification changes for product improvement without prior notice. The performance
specification figures indicated are nominal values of production units. There may be some
deviations from these values in individual units.

1. For continued safety,  no modification of any circuit

should be attempted.

2. Disconnect AC power before servicing.

Before returning the projector to the user,  perform
the following safety checks:
1. Inspect lead wires are not pinched between the chassis

and other metal parts of the projector.

2. Inspect all protective devices such as non-metallic

control knobs, insulating materials, cabinet backs,
adjustment and compartment covers or shields,
isolation resistor-capacity networks, mechanical
insulators, etc.

3. To be sure that no shock hazard exists, check for

current leakage in the following manner:

»

Plug the AC cord directly into a 120-volt AC outlet,
(Do not use an isolation transformer for this test).

»

Using two clip leads, connect a 1.5k ohm, 10 watt
resistor paralleled by a 0.15µF capacitor in parallel
between all exposed metal cabinet parts and earth
ground.

»

Use an AC voltmeter with sensitivity of 5000 ohm per
volt.,  or higher,  sensitivity to measure the AC voltage
drop across the resistor (See Diagram).

»

All checks must be repeated with the AC plug
connection reversed.  (If necessary,  a non-polarized
adapter plug must be used only for the purpose of
completing these checks.)
Any reading of 0.3 volts RMS (this corresponds to 0.2
milliamp. AC.) or more is excessive and indicates a
potential shock hazard which must be corrected before
returning the unit to the owner.

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121

1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121

Many electrical  and  mechanical parts in LCD Projector
have special safety-related characteristics.
These characteristics are often not evident from visual
inspection, nor can protection afforded by them be
necessarily increased by using replacement components
rated for higher voltage, wattage, etc.
Replacement parts which have these special safety
characteristics are identified in this manual; electrical
components having such features are identified  by "

å

"

and  shaded  areas in the Replacement Parts Lists and
Schematic Diagrams.  For continued protection,
replacement parts must be identical to those used in
the original circuit.  The use of a substitute replacement
parts which do not have the same safety characteristics
as the factory recommended replacement parts shown
in this service manual, may create shock,  fire or other
hazards.

De nombreuses pièces, électriques et mécaniques, dans
les projecteur à LCD présentent des caractéristiques
spéciales relatives à la sécurité,  qui ne sont souvent pas
évidentes à vue.
Le degré de protection ne peut pas être nécessairement
augmentée en utilisant des pièces de remplacement
étalonnées pour haute tension, puissance,  etc.
Les pièces de remplacement qui présentent ces
caractéristiques sont identifiées dans ce manuel;
les pièces électriques qui présentent ces particularités
sont identifiées par la marque "

å

" et hachurées dans la

liste des pièces de remplacement et les diagrammes
schématiques.  Pour assurer la protection, ces pièces
doivent être identiques à  celles  utilisées dans le circuit
d’origine.  L’utilisation de pièces qui n’ont pas les mêmes
caractéristiques que les pièces recommandées par l’usine,
indiquées dans ce manuel, peut provoquer des
électrocutions, incendies ou autres accidents.

AC

VOLTMETER

1.5k ohm  (10W)

0.15

µ

F

TEST PROBE

TO EXPOSED
METAL PARTS

CONNECT  TO  KNOWN
EARTH GROUND 

Ë