DOWNLOAD Sharp XV-Z10000 Service Manual ↓ Size: 986.11 KB | Pages: 53 in PDF or view online for FREE

5

ANSI Lumens

800

Native Resolution

WXGA

Dimensions (W x H x D mm)

319 x 155 x 423

Weight

9.7kg

Panel Size

0.8” HD2 DLP

Contrast Ratio

2600:1

Fan Noise

32dB

Composite

Y

Component

2

S-Video

Y

PC RGB

2

RS-232

Y

DVI

Y

PCMCIA

N

Audio

N

PC RGB

N

Audio

N

RS-232

N

Other Outputs

DC 12v

Ceiling Mountable

Y

Throw Ratio

1.8 to 2.4:1

Focus

Manual

Lens Shift

Y

Supported Resolutions

SXGA, XGA, SVGA,

VGA,

MAC 21”/19”/16”/13”

Audio

N/A

Control

via RS232

Available Lenses

Y

Remote Control

InfraRed / Wired

Mouse Function

N

Pointer

N

Lamp

270W

Lamp Life

2000

Warranty

1Yr RTB

Lamp Warranty

90 days

Additional Features

DVI-I All Digital

Projection, 6x Colour

Wheel, Sealed Optics

6

General Terms & Conditions
Product warranty is offered on the terms specified in this policy, provided that:
(a) The product is serviced by the approved service company.
(b) Repairs or alterations have not been performed or attempted by unauthorised personnel.
(c) The product is of original design and specification.
(d) The product has been properly maintained and operated in accordance with the
manufacturers specifications.
(e) The product is within its stated warranty period.
(f) Proof of purchase is available on request.
(g) The fault has been caused by a genuine manufacturing defect.

Exclusions to Warranty
The following items are not covered by the warranty. Any work carried out relating to these
items will be on a chargeable basis:
(a) Faults caused directly or indirectly by incorrect installation, maintenance or operation.
(b) Accidental damage, misuse, abuse or neglect.
(c) Alteration or repairs carried-out by person(s) not authorised by Sharp.
(d) General wear & tear.
(e) Internal cleaning & maintenance.
(f) Act of God, such as fire, flood, lightening etc.
(g) The supply of fraudulent or negligent information to the Help-Desk or service company.
(h) Cosmetic parts, including cabinet & exterior parts.
(i) Consumable items, including projector lamps & air filters.
(j) Cables (unless faulty-as-new).
(k) Fuses (unless related to an applicable fault).
(l) Batteries.
(m) Use of the product in conjunction with other products or accessories not approved by
Sharp.
(n) Pixel failures within the specification of the product. (LCD & DMD panels)
(p) Installation and/or decommissioning (unless otherwise stated).

No Fault Found
Product returned to the approved service company with no-fault-found, or is found to be
operating in accordance with its specification, will be subject to a handling charge.

Routine Maintenance
Routine maintenance, such as external cleaning, replacement of air filters etc, should be
carried out at the intervals specified in the product operation manual by the reseller (or end-
user where applicable).

Projector Products:
Where these products are used in dusty and/or smoky environments, then the frequency of
routine maintenance should be increased appropriately

Internal Cleaning: 
Where periodic internal cleaning is required, this must only be carried out by qualified
personnel.

7

Geographical Areas Covered
UK; Republic of Ireland

Warranty Service Arrangements
1-years standard

The approved service company will collect the product from the end-user, repair & return to the
end-user under warranty.

Lamp Warranty Service Arrangements
90-days standard
The end-user returns the faulty lamp and lamp warranty claim form (Provided with the
projector) to the approved service company who will inspect and replace under warranty.

Unit J Prince of Wales Industrial Park
Vulcan St
Oldham
Lancashire OL1 4ER
Tel: 0161 626 4067
Fax: 0161 627 1741
Internet: 

www.tpgroup.co.uk

8

• 

The warning lights on the projector indicate problems inside the projector.

• 

There are two types of warning lights: a TEMPERATURE WARNING indicator that warns
you when the projector is too hot, and a LAMP REPLACEMENT indicator that warns you
when to change the lamp.

• 

If a problem occurs, either the TEMPERATURE WARNING indicator or the LAMP
REPLACEMENT indicator will illuminate in red. After turning off the power, follow the
procedures given below.

If the temperature inside the projector increases, due
to blockage of the air vents, or the setting location,
“TEMP ” will blink in the lower left corner of the
picture. If the temperature keeps on rising, the lamp
will turn off and the temperature warning indicator
will blink, the cooling fan will run for further 90
seconds, then the power will be shut off. After
“TEMP” appears, be sure to perform the following
measures.

• 

The lamp life used for approximately 1,900
hours.

• 

When the remaining lamp life used becomes
1,900 or less, “Lamp Warning Icon” will be
displayed on the screen in yellow. When the
hours used becomes 2,000, “Lamp Warning
Icon” will change to “Lamp Warning Icon” (red),
the lamp will automatically turn off and then the
projector as well. At this time, the lamp
replacement indicator will illuminate in red.

• 

If you try to turn on the projector a fourth time
without replacing the lamp, the projector will not
turn on.