Sharp XV-Z10000 (serv.man11) Service Manual ▷ View online
44
XV-Z10000
3
Checking the DSUB input.
Feed the PC-RGB signal to INPUT5.
Select INPUT5 as the input.
Check to see if there are the R, G
and B signals at pins (126), (136)
and (146) of IC8004.
and B signals at pins (126), (136)
and (146) of IC8004.
DSUB connector
or its peripheral
part defective.
or its peripheral
part defective.
IC8302 or its peripheral circuit
defective.
defective.
IC8025, IC8004 or their peripheral
circuit defective.
circuit defective.
NO
YES
NO
YES
Does the image appear?
Are there the R, G and B signals?
YES
NO
Is there any distortion with the image?
Check the vertical and horizontal sync
signals at pin (6) of IC8364 and pin (6)
of IC8385.
signals at pin (6) of IC8364 and pin (6)
of IC8385.
Sync separation circuit, IC8354m
IC8365 or their peripheral circuit
defective.
IC8365 or their peripheral circuit
defective.
NO
NO
YES
Are the sync signals as specified?
YES
Are there the horizontal and vertical sync
signals at TL8130 and TL8131?
signals at TL8130 and TL8131?
45
XV-Z10000
YES
YES
YES
YES
YES
Checking the lamp
light-up
Is discharge sound heard
when turning on the power
switch?
when turning on the power
switch?
The lamp fails to light up.
Check the power circuit.
Check the power circuit
or the fan circuit on the
main circuit.
or the fan circuit on the
main circuit.
Check the
microprocessor circuit.
Replace the ballast power
PWB.
microprocessor circuit.
Replace the ballast power
PWB.
NO
Replace the ballast power
PWB. Check the
microprocessor circuit.
PWB. Check the
microprocessor circuit.
NO
NO
Are the cooling fans
running well?
running well?
NO
Reconnect the sockets
tightly.
tightly.
NO
Is the lamp or CW line
socket out of position?
socket out of position?
Replace the lamp or the
CW.
CW.
Is a voltage of about DC
340 V applied across the
ballast power circuit
CP1001?
340 V applied across the
ballast power circuit
CP1001?
Is a voltage of over 3.5 V
applied at pin (1) of the
ballast power circuit
CP1501?
applied at pin (1) of the
ballast power circuit
CP1501?
46
XV-Z10000
YES
YES
YES
No horizontal
synchronization
Is the terminal input
connection as specified? Is
the cable tightly
connected?
connection as specified? Is
the cable tightly
connected?
Check the line between
IC2506 and IC2509.
IC2506 and IC2509.
Check the line between
IC2506 and the input
terminal.
IC2506 and the input
terminal.
NO
NO
Is there the horizontal sync
pulse at pin (14) of
IC2506?
pulse at pin (14) of
IC2506?
NO
Use the specified cable.
Reconnect it tight enough.
Reconnect it tight enough.
Is there the horizontal
sync pulse at pin (11) of
IC2509?
sync pulse at pin (11) of
IC2509?
Go to "PC Board
Troubleshooting".
Troubleshooting".
YES
YES
YES
No vertical
synchronization
Is the terminal input
connection as specified? Is
the cable tightly
connected?
connection as specified? Is
the cable tightly
connected?
Check the line between
IC2506 and IC2509.
IC2506 and IC2509.
Check the line between
IC2501 and the input
terminal.
IC2501 and the input
terminal.
NO
NO
Is there the vertical sync
pulse at pin (14) of
IC2501?
pulse at pin (14) of
IC2501?
NO
Use the specified cable.
Reconnect it tight enough.
Reconnect it tight enough.
Is there the vertical sync
pulse at pin (8) of
IC2509?
pulse at pin (8) of
IC2509?
Go to "PC Board
Troubleshooting".
Troubleshooting".
47
XV-Z10000
YES
NO
Checking IC3504 (3D
Noise Reduction) and its
Peripheral Circuits
Are there the input signals
at pins (88) (Y signal) and
(96) (C signal) of IC3504?
at pins (88) (Y signal) and
(96) (C signal) of IC3504?
Check IC3504 and its
peripheral circuits.
peripheral circuits.
Check the line up to the
PC board connector or
the circuits that follow the
PC board.
PC board connector or
the circuits that follow the
PC board.
NO
YES
Are there the output
signals at pins (84) (Y
signal) and (83) (C signal)
of IC3504?
signals at pins (84) (Y
signal) and (83) (C signal)
of IC3504?
Check the signal input
circuit or IC2505 and its
peripheral circuits.
circuit or IC2505 and its
peripheral circuits.
Click on the first or last page to see other XV-Z10000 (serv.man11) service manuals if exist.