DOWNLOAD Sharp XG-V10WE (serv.man8) Service Manual ↓ Size: 1.59 MB | Pages: 59 in PDF or view online for FREE

In the interests of user-safety (Required by safety regulations in some countries) the set should be restored
to its original condition and only parts identical to those specified should be used.

Im lnteresse der Benutzersicherheit (erforderliche Sicherheitsregeln in einigen Ländern) muß das Gerät in seinen
Originalzustand  gebracht werden.  Außerdem dürfen für die spezifizierten Bauteile nur identische Teile verwendet
werden.

S00J4XG-V10WE

• SPECIFICATIONS ............................................. 3

• NOTE TO SERVICE PERSONNEL ................... 4

• OPERATION MANUAL ...................................... 6

• REMOVING OF MAJOR PARTS ..................... 14

• RESETTING THE TOTAL LAMP TIMER ......... 19

• THE OPTICAL UNIT OUTLINE ........................ 20

• CONVERGENCE AND

 FOCUS ADJUSTMENT .................................. 21

• ELECTRICAL ADJUSTMENT .......................... 27

• ADJUSTING THE PC INTERFACE ................. 35

• TROUBLE SHOOTING TABLE ........................ 39

• CHASSIS LAYOUT ......................................... 118

• BLOCK DIAGRAM ......................................... 120

Page

Page

• OVERALL WIRING DIAGRAM ...................... 122

• DESCRIPTION OF SCHEMATIC DIAGRAM . 124

• WAVEFORMS ................................................ 125

• SCHEMATIC DIAGRAM ................................ 126

• PRINTED WIRING BOARD ASSEMBLIES ... 184

• PARTS LIST

Ë

ELECTRICAL PARTS ............................... 197

Ë

CABINET AND MECHANICAL PARTS .... 231

Ë

ACCESSORIES PARTS ........................... 236

Ë

PACKING PARTS ..................................... 236

• PACKING OF THE SET ................................. 237

• OPTIONAL BOARDS ..................................... 238

• TECHNISCHE DATEN ..................................... 60

• HINWEISE FÜR DAS

WARTUNGSPERSONAL ................................. 61

• BEDIENUNGSANLEITUNG ............................. 63

• ENTFERNEN DER HAUPTTEILE ................... 71

• RÜCKSTELLEN DES LAMPEN-BETRIEBS-

ZEITZÄHLERS ................................................. 76

• ÜBERSICHT DER OPTIKEINHEIT .................. 77

• EINSTELLUNG VON KONVERGENZ UND

BRENNPUNKT ................................................ 78

• ELEKTRISCHE EINSTELLUNG ...................... 84

• EINSTELLUNG DER PC-PLATINE .................. 92

• FEHLERSUCHTABELLE ................................. 96

• CHASSIS-ANORDNUNG ............................... 118

Seite

Seite

• BLOCKSCHALTBILD ..................................... 120

• GESAMTSCHALTPLAN ................................. 122

• BESCHREIBUNG DES SCHEMATISCHEN

SCHALTPLANS ............................................. 124

• WELLENFORMEN ......................................... 125

• SCHEMATISCHER SCHALTPLAN ................ 126

• LEITERPLATTENEINHEITEN ....................... 184

• ERSATZTEILLISTE

Ë

ELEKTRISCHE BAUTEILE ...................... 197

Ë

CEHÄUSE UND MECHANISCHE

BAUTEILE ................................................ 231

Ë

ZUBEHÖRTEILE ...................................... 236

Ë

VERPACKUNGSTEILE ............................ 236

• VERPACKEN DES GERÄTS ......................... 237

• WAHLWEISE PLATINE .................................. 238

Product type

Model

Video system

Display method

LCD panel

Projection lamp

Contrast ratio

Video input signal

S-video input signal

Component input signal

Horizontal resolution

RGB input signal

Pixel clock

Vertical frequency

Horizontal frequency

Computer contr ol signal

Speaker system

Rated voltage

Input curr ent

Rated frequency

Power consumption

Power dissipation

Operating temperatur e

Storage temperature

Cabinet

I/R carrier frequency

Laser pointer of remote control

Dimensions (appr ox.)

Weight (appr ox.)

Supplied accessories

Replacement par ts

LCD Projector
XG-V10WE
PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC 4.43
DTV 480i/480P/720P/1080i
LCD panel 

✕

3, RGB optical shutter method

Panel size: 46 mm (1.8") (28.7 [H] 

✕

 35.8 [W] mm)

Display method: Translucent TN liquid cr ystal panel
Drive method: TFT (Thin Film Transistor) Active Matrix panel
No. of dots: 1,310,720 dots (1,280 [H] 

✕

 1,024 [V])

200 W UHP lamp 

✕

 2

400:1
BNC Connector: VIDEO (INPUT 4, 5), composite video, 1.0 Vp-p, sync negative, 75 

Ω

terminated
RCA Connector: AUDIO (INPUT 4, 5), 0.5 Vrms more than 22 k

Ω

 (stereo)

4-pin Mini DIN connector (INPUT 4, 5)
Y (luminance signal): 1.0 Vp-p, sync negative, 75 

Ω

 terminated

C (chrominance signal): Burst 0.286 Vp-p, 75 

Ω

 terminated

BNC Connector (INPUT 2, 4, 5)
Y: 1.0 Vp-p, sync negative, 75 

Ω

 terminated

P

B

: 0.7 Vp-p, 75 

Ω

 terminated

P

R

: 0.7 Vp-p, 75 

Ω

 terminated

620 TV lines (video input), 720 TV lines (DTV 720P input, Dot by Dot)
15-

PIN

 

MINI

 D-

SUB

 

CONNECTOR

 (INPUT 1), 5 BNC 

CONNECTOR

 (INPUT 2):

RGB separate/composite sync/sync on gr een type analog input: 0 0.7 Vp-p, positive,

 terminated

DVI 

CONNECTOR

 (29-

PIN

) (INPUT 3), RGB (DIGITAL), 250 1,000 mV, 50 

Ω

H

ORIZONTAL

 

SYNC

. 

SIGNAL

: TTL level (positive/negative) or composite sync (Apple only)

V

ERTICAL

 

SYNC

. 

SIGNAL

: Same as above

12 230 MHz
43 200 Hz
15 126 kHz
9-pin D-sub connector (RS-232C Input Port/Output Por t)
5 

✕

8 cm (1 

31

32

" 

✕

3 

5

32

") oval 

✕

2, 3 W  +  3 W (stereo)

AC 110 120/220 240 V
6.2 A/3.1 A
50/60 Hz
575 W
< 2,100 BTU/hour

+

+

5 C to 

+

40 C

20 C to 

+

60 C

Plastic
38 kHz
Wave length: 650 nm / Max. output: 1 mW / Class 

II

 Laser Product

444.2 

✕

 196.2 

✕

 621.3 mm (W 

✕

 H 

✕

 D) (main body only)

530.1 

✕

 221.9 

✕

 643.2 mm (W 

✕

 H 

✕

 D) (including standar d lens, terminal cover,

adjustment feet and pr ojecting par ts)
18.9 kg (main body only)
Remote control, Two AA size batteries, Power cord (1.8 m), RGB cable (3 m), PS/2 mouse
control cable (1 m), USB mouse contr ol cable (1 m), Remote mouse receiver, Extra air
filter, Terminal cover, CD-ROM, LCD projector operation manual, LCD pr ojector quick
references, Sharp Advanced Pr esentation Software operation manual
Lamp unit (Lamp/cage module) (BQC-XGV10WU/1), Remote control (RRMCG1565CESA),
AA size batteries, Power cord, RGB cable (QCNW-5304CEZZ), PS/2 mouse control cable
(QCNW-5113CEZZ), USB mouse control cable (QCNW-5680CEZZ), Remote mouse
receiver (RUNTK0673CEZZ), Air filter (PFILD0110CEZZ), Terminal cover
(CCOVA1789CE01), CD-ROM (UDSKA0027CEN1), LCD projector operation manual (TINS-
6975CEZZ), LCD projector quick r eferences (TINS-6981CEZZ, TINS-6982CEZZ, TINS-
6983CEZZ), Sharp Advanced Presentation Software operation manual (TINS-6993CEZZ)

This SHARP projector uses LCD (Liquid Cr ystal Display) panels. These
very sophisticated panels contain 1,310,720 pixels (

✕

 RGB) TFTs

(Thin Film Transistors). As with any high technology electr onic
equipment such as lar ge scr een TVs, video systems and video
cameras, there are certain acceptable tolerances that the equipment
must conform to.

This unit has some inactive TFTs within acceptable tolerances which
may result in illuminated or inactive dots on the pictur e screen. This
will not affect the pictur e quality or the life expectancy of the unit.

Specifications are subject to change without notice.

12345678901234567890123456789012123456789012345

12345678901234567890123456789012123456789012345

12345678901234567890123456789012123456789012345

1234567890123456789012345678901212345678901234

1234567890123456789012345678901212345678901234

1234567890123456789012345678901212345678901234

1

2

Lamp

Reflector

Since small amounts of UV-radiation are emitted from
an opening between the exhaust fans, it is recom-
mended to place the cap of the optional lens on the
opening during servicing to avoid eye and skin ex-

posure (Fig. 1).

Note: Please obtain a lens cap before servicing a

model XG-V10WE that is received without
one.

DANGER !  –– Never turn the power on without the
lamp to avoid electric-shock or damage of the
devices since the stabilizer generates high voltages
at its start.

Since the lamp reaches a very high temperature
during units operation replacement of the lamp
should be done at least one hour after the power
has been turned off.  (to allow the lamp to cool off.)
Installing the new lamp, make sure not to touch the
lamp (bulb) replace the lamp by holding its reflector

2

.

[Use original replacement only.]

LENS CAP

1. Be sure to wear sun-glasses when servicing the

projector with the lamp
turned “on” and the top
enclosure removed.

2. Do not operate the lamp outside of the lamp housing.

3. Do not operate for more than 2 hours with the

enclosure removed.

1. Be sure to disconnect the AC plug when replacing

the lamp.

2. Allow one hour for the unit to cool down before

servicing.

3. Replace only with same type lamp. Type

CLMPF0064DE01/02 or BQC-XGV10WU/1 rated
100V/200W.

4. The lamp emits small amounts of UV-Radiation,  avoid

direct-eye contact.

5. The medium pressure lamp involves a risk of

explosion. Be sure to follow installation instructions
described below and handle the lamp with care.

1234567890123456789012345678901212345678901234

1234567890123456789012345678901212345678901234

1234567890123456789012345678901212345678901234

1234567890123456789012345678901212345678901234