DOWNLOAD Sharp XG-V10WE (serv.man21) Service Manual ↓ Size: 793.64 KB | Pages: 9 in PDF or view online for FREE

Model
XG-V10WE (serv.man21)
Pages
9
Size
793.64 KB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Projector
File
xg-v10we-sm21.pdf
Date

Sharp XG-V10WE (serv.man21) User Manual / Operation Manual ▷ View online

2
AN-L10T
OPERATION MANUAL
10BASE-T   CONTROL
TX/RX
LINK
10BASE-T
Included Items
Part Names
The AN-L10T 10BASE-T board can be installed in an expan-
sion slot on a Sharp projector to control the projector by
10BASE-T interface.
Before installing and using this board, be sure to thoroughly
read the operation manuals accompanying the projector and
Sharp Advanced Presentation Software Professional Edition.
Part Names
1
10BASE-T port
Use UTP cables for 10BASE-T/100BASE-TX (category5).
When connecting a PC to this board, use a cross type
cable; and when connecting a Hub to this board, use a
straight type cable.
2
LED indicator ( LINK )
Lights up when this board is linked.
3
Status LED ( TX/RX )
Lights up when data is transmitted or received.
Warning
This is a class A product. In a domestic environment this
product may cause radio interference in which case the user
may be required to take adequate measures.
Warning:
10BASE-T Board installation/uninstallation must be performed
by authorized service personnel only.
ENGLISH
Set up
A. “Setting Up” the Projector
1. Select “Options” from the menu screen of the projector which
the 10BASE-T board is installed.
2. Select “LAN board”.
Sub menu screen for set up appears.
3. Select “IP Address Set” and enter the address assigned for
this board.
4. Enter the Gateway address and Subnet mask.
• If the IP address, Gateway address or Subnet mask is
unknown, refer to a network administrator.
B. Setting Up the Sharp Advanced Presentation Software
Professional Edition
Enter the IP address as in step A-3.
When setting the “Operation Mode ” to the “Single Projector
Operation Mode ”, enter the address in the  “Projector Setting”
menu, and to the “Multiple Projector Operation Mode ”, enter it
in the “Scan Setting” menu.
Troubleshooting
If it does not operate correctly, check cable connection and
each setting related to IP address, Gateway address, Subnet
mask, etc.
Use the Sharp Advanced Presentation Software Professional
Edition Version 1.3 or higher.
Download the latest version from our website using the
following URL:
http://www.sharp-world.com/projector/
Major Specifications (Interface)
Standard: Conforms to IEEE802.3
• Connector: RJ-45
• Max. transmission speed: 10 Mbps*
• Max. transmission range: 330 ft. (Appr ox. 100m)*
*Between the hub and this board
• Note that the specifications and the appearance of this
board are subject to change without prior notice for the
purpose of design improvements.
3
2
1
1 10BASE-T BOARD
1 Plotter
7 Screws
3
AN-L10T
BEDIENUNGSANLEITUNG
10BASE-T   CONTROL
TX/RX
LINK
10BASE-T
Mitgelieferte Gegenstände
Lage de Bedienelemente
3
2
1
1 10BASE-T-BOARD
1 Plotter
7 Schrauben
DEUTSH
Warnung:
Die Installation bzw. Entfernung des 10BASE-T-Boards darf nur durch
autorisiertes Wartungspersonal vorgenommen werden.
Warnung
Dieses ist ein Computer-Produkt der Klasse A. In einem
Wohnbereich kann dieses Produkt zu Interferenzen beim Radio- und
Fernsehempfang führen, die durch den Benutzer dieses Produktes
durch entsprechende Ma ßnahmen behoben werden sollten.
Das AN-L10T 10BASE-T-Board kann in deinem Erweiterungssteckplatz
eines Projektors von Sharp zur Steuerung des Projektors mit dem
10BASE-T-Interface installiert werden. Lesen Sie vor der Installation
und Verwendung des Boards die Bedienungsanleitung des Projektors
und der Sharp Advanced Presentation Software Professional Edition
gründlich durch.
Lage der Bedienelemente
1
10BASE-T-Port
UTP-Kabel für 10BASE-T/100BASE-TX (Kategorie 5)verwenden.
Beim Anschluß eines PCs an dieses Board ein gekreuztes Kabel
verwenden und bei Anschlu ß einer Hub-Buchse an dieses Board
ein normales Kabel verwenden.
2
LED-Anzeige (LINK)
Leuchtet bei Verbindung mit diesem Board auf.
3
Status-LED (TX/RX)
Leuchtet beim Senden und Empfangen von Daten auf.
Einstellung
A. „Einstellung“ des Projektors
1. „Optionen“ aus der Menü-Anzeige des Projektors wählen, in dem
das 10BASE-T-Board installiert ist.
2. Das „LAN-Board“ wählen.
Das Untermenü für die Einstellung wird angezeigt.
3. „IP Adresse Set“ wählen und die diesem Board zugewiesene
Adresse eingeben.
4. Die Gateway-Adresse und die Subnet Mask eingeben.
• Wenn die IP-Adresse, Gateway-Adresse oder Subnet Mask nicht bekannt ist,
wenden Sie sich bitte an einen Netzwerk-Administrator.
B. Einstellung der Sharp Advanced Presentation Software
Professional Edition.
Die IP-Adresse wie in Schritt A-3 beschrieben eingeben.
Bei Einstellung des „Operation Mode “ auf „Single Projector Operation
Mode“ die Adresse im Men ü für „Projector Setting“ eingeben und im
„Multiple Projector Operation Mode “ die Adresse im Men ü für „Scan
Setting“ eingeben.
Fehlersuche
Wenn diese Einstellung nicht richtig funktioniert, pr üfen Sie die
Kabel-Anschl üsse und die einzelnen Einstellungen der IP-Adresse,
Gateway-Adresse, Subnet Mask usw.
Die Sharp Advanced Presentation Software Professional Edition
Version 1.3 oder höher verwenden. Die letzte Version kann von
unserer Web-Seite unter Verwendung des folgenden URL
heruntergeladen werden:
http://www.sharp-world.com/projector/
Technische Daten (Interface)
Standard: Übereinstimmung mit IEEE802.3
• Anschluß: RJ-45
• Max. Übertragungsgeschwindigkeit: 10 Mbps*
• Max. Übertragungsbereich: 330 feet (ca. 100 m)*
*Zwischen der Hub-Buchse und diesem Board
• Ä nderungen der technischen Daten und der Gestaltung dieses
Boards ohne vorherige Ank ündigung f ür Verbesserungen
vorbehalten.
5
AN-L10T
4
12
11
10
9
8
7
6
5
4
3
2
1
A
B
C
D
E
F
G
H
Ë
10 BASE-T BOARD / 10BASE-T-BOARD-EINHEIT
6
AN-L10T
6
5
4
3
2
1
A
C
D
E
F
G
H
10 BASE-T BOARD Unit (Wiring Side)
10 BASE-T-BOARD Einheit (Leiterbahnseite)
PRINTED WIRING BOARD ASSEMBLIES
LEITERPLATTEN EINHEIT
10 BASE-T BOARD Unit (Component Side)
10 BASE-T-BOARD Einheit (Bestückungsseite)
Page of 9
Display

Sharp XG-V10WE (serv.man21) User Manual / Operation Manual ▷ Download

  • DOWNLOAD Sharp XG-V10WE (serv.man21) Service Manual ↓ Size: 793.64 KB | Pages: 9 in PDF or view online for FREE
  • Here you can View online or download the User Manual / Operation Manual for the Sharp XG-V10WE (serv.man21) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp XG-V10WE (serv.man21) Projector. Information contained in Sharp XG-V10WE (serv.man21) User Manual / Operation Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.