DOWNLOAD Sharp XG-P25XE (serv.man35) Service Manual ↓ Size: 592.6 KB | Pages: 6 in PDF or view online for FREE

Model
XG-P25XE (serv.man35)
Pages
6
Size
592.6 KB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Projector / Multiple function
File
xg-p25xe-sm35.pdf
Date

Sharp XG-P25XE (serv.man35) User Manual / Operation Manual ▷ View online

E-57
Multiple Function
Using Extended Functionality Features
This projector has outstanding network capability.
• Internet access for self-diagnosis
• Multiple and group projector control
• Simultaneous multiple projector control
Internet access for self-diagnosis, status information and preventive
maintenance
This projector can be used in a network of up to 250 projectors managed from a single PC with the accompanied
Sharp Advanced Presentation Software Professional Edition. This projector can be connected to a PC using an
RS-232C connection. Output terminals are provided (RS-232C on the projector) enabling a daisy chain configuration
and eliminating the need for a distributor.
This projector is also equipped with a function to send status information (lamp usage time, etc.) to a Sharp
Service Center or outside contractor for quick and efficient customer service.
• For more information on these features, see the operation manuals accompanying the Sharp Advanced Presentation Software
Professional Edition.
Internet
LAN
LAN
LAN
E-mail
E-mail
E-58
Multiple Function
This projector can be used in a network of projectors managed from a single PC with the accompanied Sharp
Advanced Presentation Software Professional Edition. Projectors in conference rooms on the first and third floors
of a building, for example, can be used for video presentations, while projectors on the second floor can be used
for PC-assisted presentations. Projectors can even be powered down at different times (e.g., projectors on the first
and second floors are powered down in one hour, while those on the third floor are powered down in two hours).
• For more information on these features, see the operation manuals accompanying the Sharp Advanced Presentation Software
Professional Edition.
• Transmission performance of the RS-232C cable can vary depending on the surrounding conditions. Use the transmission
repeater if performance is not up to par.
• We recommend you use an RS-232C cable not longer than 49
⬘ 3⬙ (15 m).
Multiple and group projector control via computer
Building
RS-232C
RS-232C
RS-232C
RS-232C cable
RS-232C cable
RS-232C
RS-232C cable
Video cable
Video cable
RS-232C
Control PC 
Sharp Advanced 
Presentation Software 
“Professional Edition”
3rd Floor
2nd Floor
1st Floor
Video
Source 1
Video
Source 2
(RS-232C) Specifications and Command Settings
Using Extended Functionality Features
E-59
Multiple Function
Using Extended Functionality Features
Stack Projection
For brighter images, two projectors can be stacked using the Stack Setting function.
Basic
Computer
RGB cable
RGB cable
RS-232C cable
RS-232C OUT
RS-232C IN
Projector 2
INPUT1
OUTPUT
INPUT1
Stack Setting
Master
Stack Setting
Slave
Projector 1
Below are the steps for making a stack projection as shown in the diagram above.
1
Set the “Stack Setting” of Projector 1 to “Master”.
(See page 
52
 for details.)
2
Set the “Stack Setting” of Projector 2 to “Slave”.
(See page 
52
 for details.)
3
Select the same RS-232C transmission speed for both Projector 1 and Projector 2.
(See page 
53
 for details.)
4
Adjust the “Set Inputs” setting as the table below.
(See page 
53
 for details.)
Set Inputs
ON
OFF
OFF
OFF
OFF
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5
Set Inputs
ON
OFF
OFF
OFF
OFF
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5
Projector 1 (Master)
Projector 2 (Slave)
Set input terminals you will use to “ON”.
Set input terminals you will not use to “OFF”.
E-60
Multiple Function
Using Extended Functionality Features
5
Turn off the projector.
6
Connect the INPUT 1 port on Projector 1 to the RGB port on the computer using an RGB cable.
(See page 
16
 for details.)
7
Connect the OUTPUT port on Projector 1 to the INPUT 1 port on Projector 2 using an RGB cable.
(See page 
21
 for details.)
When connecting an RGB cable to Projector 2, use the input port that has the same number as Projector 1. (INPUT 1, in this
case)
8
Connect the RS-232C OUT port on Projector 1 to the RS-232C IN port on Projector 2 using an RS-232C
cable.
(See page 
20
 for details.)
9
Turn on the projector first, then turn on the computer.
When inputting multiple image sources, refer to the example below to adjust Set Inputs.
Computer 1
Computer 2
DVD video player
Distributor
Projector 1
Projector 2
Stack Setting
Master
Stack Setting
Slave
RGB cable
RGB cable
RGB cable
Video cable
INPUT1
INPUT2
OUTPUT
INPUT4
INPUT4
RS-232C cable
RS-232C OUT
RS-232C IN
INPUT1
Set Inputs
ON
ON
OFF
ON
OFF
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5
Set Inputs
ON
OFF
OFF
ON
OFF
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5
Projector 1 (Master)
Projector 2 (Slave)
Application
Page of 6
Display

Sharp XG-P25XE (serv.man35) User Manual / Operation Manual ▷ Download

  • DOWNLOAD Sharp XG-P25XE (serv.man35) Service Manual ↓ Size: 592.6 KB | Pages: 6 in PDF or view online for FREE
  • Here you can View online or download the User Manual / Operation Manual for the Sharp XG-P25XE (serv.man35) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp XG-P25XE (serv.man35) Projector. Information contained in Sharp XG-P25XE (serv.man35) User Manual / Operation Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.