Sharp XG-P20XE Handy Guide ▷ View online
Options
Version 1.4
Issue 04/2006
Issue 04/2006
17
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
UK Options
Sales Code
Description
AN-P48EZ
Tele Zoom Lens
AN-T6EZ
Tele Zoom Lens (Bayonet Mount Required)
AN-P9MX
Fixed Wide Lens
AN-W6EZ
Wide Lens (Bayonet Mount Required)
AN-NV6T
Ceiling Mount Bracket
AN-TK201
High Ceiling Installation
AN-TK202
Standard Ceiling Installation
AN-NV6T
AN-P48EZ
AN-T6EZ
AN-P9MX
AN-W6EZ
AN-TK202
AN-TK201
Options
Version 1.4
Issue 04/2006
Issue 04/2006
18
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Setting up the Screen
Position the projector perpendicular to the screen with all feet flat and level to achieve an
optimal image.
optimal image.
Note
•
The projector lens should be centred in the middle of the screen. If the horizontal line
passing through the lens centre is not perpendicular to the screen, the image will be
distorted, making viewing difficult.
passing through the lens centre is not perpendicular to the screen, the image will be
distorted, making viewing difficult.
•
For optimal image, position the screen so that it is not in direct sunlight or room light.
Light falling directly on the screen washes out the colours, making viewing difficult. Close
the curtains and dim the lights when setting up the screen in a sunny or bright room.
Light falling directly on the screen washes out the colours, making viewing difficult. Close
the curtains and dim the lights when setting up the screen in a sunny or bright room.
•
A polarising screen cannot be used with this projector.
Two optional lenses from Sharp are also available for specialised application. Please see your local Sharp
Authorised LCD Projector Dealer to details on all the lenses. (Refer to the lens operation manual when
attaching a lens.) Also, be sure to have service personnel install the AN-P9MX and AN-P48EZ optional lenses.
Authorised LCD Projector Dealer to details on all the lenses. (Refer to the lens operation manual when
attaching a lens.) Also, be sure to have service personnel install the AN-P9MX and AN-P48EZ optional lenses.
Throw Distance
•
The graph below is for 100 inches (254 cm) screen with 4:3 normal mode.
Standard Set-up (Front Projection)
•
Place the projector at the required distance from the
screen according to the desired picture size.
screen according to the desired picture size.
Options
Version 1.4
Issue 04/2006
Issue 04/2006
19
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Example of Standard Set-up
Options
Version 1.4
Issue 04/2006
Issue 04/2006
20
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Projecting a Reversed/Inverted Image
Projection from behind the screen
•
Place a translucent screen between the projector and the audience.
•
Reverse the image by setting “Rear” in “PRJ Mode”.
Projection using a mirror
•
Place a mirror (normal flat type) in front of the lens.
Note
When using a mirror, be sure to carefully position both the projector and the mirror so the light does not
shine into the eyes of the audience.
shine into the eyes of the audience.
Ceiling-mount set-up
•
It is recommended that you use the optional Sharp ceiling-mount bracket for this
installation. Before mounting the projector, contact your nearest Sharp Authorised
Projector Dealer or Service Centre to obtain the recommended ceiling-mount bracket
(sold separately.) (AN-NV6T ceiling mount bracket, its AN-TK201 and AN-TK202
extension tubes)
installation. Before mounting the projector, contact your nearest Sharp Authorised
Projector Dealer or Service Centre to obtain the recommended ceiling-mount bracket
(sold separately.) (AN-NV6T ceiling mount bracket, its AN-TK201 and AN-TK202
extension tubes)
•
Be sure to adjust the position of the projector to match the distance (H) from the lens
centre position to the lower edge of the image, when mounting the projector on the
ceiling.
centre position to the lower edge of the image, when mounting the projector on the
ceiling.
•
Invert the image by setting “Ceiling + Front” in “PRJ Mode”.
Click on the first or last page to see other XG-P20XE service manuals if exist.