DOWNLOAD Sharp XG-NV7XE (serv.man10) Service Manual ↓ Size: 6.84 MB | Pages: 67 in PDF or view online for FREE

When no input signal is detected for more than 15
minutes, the projector will automatically shut off.

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press MENU.

2 Press ß/© to select “Options”.

3 Press ∂/ƒ to select “Auto Power Off”.

4 Press ß/© to select the “ ” or “ ”.

5 Press ENTER to save the setting.

6 To exit from the GUI, press MENU.

5

2, 3, 4

1, 6

• The on-screen message on the left will appear five minutes

before the power is automatically turned off.

This function allows you to select either an interlaced
display or a progressive display of a video signal. The
progressive display projects a smoother video image.

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press MENU.

2 Press ß/© to select “Options”.

3 Press ∂/ƒ to select “I/P Conversion”, and then

press ©.

4 Press ∂/ƒ to select “Interlaced” or “Progressive”.

5 Press ENTER to save the setting.

6 To exit from the GUI, press MENU.

Interlaced mode creates a single image through the activation
of scanning lines in two fields. Use this mode when projecting
moving images.

Progressive mode creates a single image using all available
scanning lines, thereby eliminating the flicker and stripes that
result from interlaced source images projected as still images.

5

2, 3, 4

1, 6

This function allows you to check the accumulated lamp
usage time.

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press MENU.

2 Press ß/© to select “Options”. The lamp usage

time will be displayed.

• It is recommended that the lamp be replaced after

approximately 1,400 hours of usage. At this point, take the
projector to your nearest Sharp Authorised LCD Projector
Dealer or Service Centre to have the lamp replaced. See
page 47 for details.

2

1

This function allows you to select the input signal type
(COMPUTER/RGB or COMPONENT) for INPUT 1 port.

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press MENU.

2 Press ß/© to select “Options”.

3 Press  ∂/ƒ to select “Signal Type”, and then

press ©.

4 Press  ∂/ƒ to select “Computer/RGB” or

“Component”.

5 Press ENTER to save the setting.

6 To exit from the GUI, press MENU.

5

2, 3, 4

1, 6

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press MENU.

2 Press ß/© to select “Options”.

3 Press ∂/ƒ to select “Signal Info” to display the

current input signal.

4 To exit from the GUI, press MENU.

• In VIDEO mode, the resolution and frequency settings will

not be displayed.

This function allows you to check the current input signal
information.

2, 3

1, 4

 Image

This function allows you to select the image displayed
when no signal is being sent to the projector.

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press MENU.

2 Press ß/© to select “Options”.

3 Press ∂/ƒ to select “Background”, and then press

©

.

4 Press ∂/ƒ to select the background image you want

to display on the screen.

5 Press ENTER to save the setting.

6 To exit from the GUI, press MENU.

• By selecting “Custom”, the projector can display a custom

image (i.e. your company logo) as the background image.
Custom image must be 256-colour BMP file with a picture
size of 1,024 

 768 or lower. Please see the Sharp

Advanced Presentation Software operation manual for how
to save (or change) a custom image.

SHARP default image

User customised image (i.e. company logo)

Blue screen

Black screen

5

2, 3, 4

1, 6