Sharp XG-NV6XE (serv.man13) User Manual / Operation Manual ▷ View online
36
“Set Up” Adjustment
1
Select the “Power” ON/OFF.
2
Select the “Input Select”.
3
To make “PRJ Mode” select
4
To make “Computer/RGB Gamma” select
5
To make “Video Gamma” select
6
To enter to the “IrCOM” mode
Select the “IrCOM” number to change the input mode of the
projector to “IrCOM” mode. In “IrCOM” mode, you can send still
images from your IrDA compatible PC or IrTranP compatible
devices. Please refer to the projector’s operation manual and this
manual for details on the IrCOM function.
projector to “IrCOM” mode. In “IrCOM” mode, you can send still
images from your IrDA compatible PC or IrTranP compatible
devices. Please refer to the projector’s operation manual and this
manual for details on the IrCOM function.
7
To make “Focus” adjustment
8
To make “Keystone” adjustments
Slide the bar to the desired location or simply type in the desired
value in the box.
value in the box.
9
To make “Zoom” adjustment
0
Select the “Black Screen” ON/OFF.
q
To start “Auto Sync”
Press the “Auto Sync” button.
w
Select the “Freeze” ON/OFF.
e
To send all the adjustment data to the projector
Press the “Send” button to control all the adjustments on this
sheet.
sheet.
r
To receive data from the projector
Press the “Receive” button to confirm the adjustments on the
projector.
projector.
t
A “NOW TRANSMITTING...” message
is displayed during
transmission.
1
2
3
4
5
0 q e
w r
6
7
7
8
9
t
t
37
“Input1 PICT”/“Input2 PICT”/“Video PICT” Adjustment
For “Input1 PICT”/“Input2 PICT” adjustment, “Color”, “Tint” and
“Sharp” adjustments are available for compornent input signal only.
(“Sharp” adjusts DVD 480i signal only.)
“Sharp” adjustments are available for compornent input signal only.
(“Sharp” adjusts DVD 480i signal only.)
1
to
7
: Slide the bar to the desired location or simply type in the desired
value in the box.
1
To make “Contrast” adjustment
2
To make “Bright” adjustment
3
To make “Red” adjustment
4
To make “Blue” adjustment
5
To make “Color” adjustment
6
To make “Tint” adjustment
7
To make “Sharp” adjustment
8
To reset the adjustments
1
to
7
Press the “Reset” button.
9
To make “Resize” select
Select a size mode from the pull down menu. It will change the
pixel composition to resize the picture on the screen.
pixel composition to resize the picture on the screen.
0
To send all the adjustment data to the projector
Press the “Send” button to control all the adjustments on this
sheet.
sheet.
q
To receive data from the projector
Press the “Receive” button to confirm the adjustments on the
projector.
projector.
w
A “NOW TRANSMITTING...” message
is displayed during
transmission.
1
2
3
4
2
3
4
9
0
q
5
6
7
6
7
8
w
Adjusting and
Controlling
38
“Fine Sync” Adjustment
1
to
4
: Slide the bar to the desired location or simply type in the desired
value in the box.
1
To make “Clock” adjustment
2
To make “Phase” adjustment
3
To make “H-POS” adjustment
4
To make “V-POS” adjustment
5
To reset all the adjustments
1
to
4
Press the “Reset” button.
6
Select the “Auto Sync Setup” ON/OFF.
“ON” is for “Auto Sync” whenever the projector is powered or
the input signal is changed .
the input signal is changed .
7
To store up to seven adjustment settings for use with various
computers
computers
Connect a PC to the projector and make the adjustments in “Input
Adjust”. And then press one of the “Save No.” buttons to save
the adjustment setting.
Adjust”. And then press one of the “Save No.” buttons to save
the adjustment setting.
●
Make a note of the “Save No.” and its stored setting, if necessary.
You cannot check each setting with this software after saving it.
You cannot check each setting with this software after saving it.
●
The previous setting will be overwritten if you save on the same “Save
No.” button.
No.” button.
8
To select the desired adjustment setting for the currently
connected PC
connected PC
Press the desired “Select No.” button.
9
To send all the adjustment data to the projector
Press the “Send” button to control all the adjustments on this
sheet.
sheet.
0
To receive data from the projector
Press the “Receive” button to confirm the adjustments on the
projector.
projector.
q
A “NOW TRANSMITTING...” message
is displayed during
transmission.
1
2
3
4
5
2
3
4
5
6
9
0
7
8
q
39
“Audio” Adjustment
1
to
3
and
5
: Slide the bar to the desired location or simply type in
the desired value in the box.
1
To make “Balance” adjustment
2
To make “Treble” adjustment
3
To make “Bass” adjustment
4
To reset the adjustments
1
to
3
Press the “Reset” button.
5
To make “Volume” adjustment
6
Select the “Mute” ON/OFF.
7
To send all the adjustment data to the projector
Press the “Send” button to control all the adjustments on this
sheet.
sheet.
8
To receive data from the projector
Press the “Receive” button to confirm the adjustments on the
projector.
projector.
9
A “NOW TRANSMITTING...” message
is displayed during
transmission.
7
8
5
6
9
1
2
3
2
3
4
Adjusting and
Controlling
Click on the first or last page to see other XG-NV6XE (serv.man13) service manuals if exist.