Sharp XG-F315X (serv.man12) User Manual / Operation Manual ▷ View online
33
Useful
Features
Operating with the Remote Control
Displaying and Setting the
Break Timer
Break Timer
Press BREAK TIMER.
• The timer starts to count down from 5
minutes.
1
2
Press P /R /O /Q to adjust the
length of the break time.
• Increases with P or Q
length of the break time.
• Increases with P or Q
5 minutes s 6 minutes s 60 minutes
• Shortens with O or R
4 minutes s 3 minutes s1 minute
• The break time can be set in units of one
minute (up to 60 minutes).
On-screen display
Canceling the break timer display function
Press BREAK TIMER.
• Break Timer does not function while the pro-
jector is operating the “Auto Sync”, “FREEZE”
or “AV MUTE” functions.
or “AV MUTE” functions.
Note
Switching the Eco+Quiet
Mode
Mode
Press ECO+QUIET to switch the
Eco+Quiet mode between on and off.
Eco+Quiet mode between on and off.
• When the Eco+Quiet Mode is set to “ON”, the
sound of the cooling fan will turn down, the
power consumption will decrease, and the lamp
life will extend.
power consumption will decrease, and the lamp
life will extend.
Press POINTER and press P/R/
O/Q on the remote control to move
the pointer.
O/Q on the remote control to move
the pointer.
Displaying the Pointer
Press SPOT and press P/R/O/Q
on the remote control to move the
spot area.
on the remote control to move the
spot area.
Using the Spot Function
1
Press POINTER again.
• The pointer will disappear.
2
1
Press SPOT again.
• The spot area will disappear.
2
• Refer to “Lamp Setting” on page
43
for de-
tails of the Eco+Quiet mode.
Note
POINTER button
ECO+QUIET button
Adjustment buttons
(P/R/O/Q)
(P/R/O/Q)
BREAK TIMER button
SPOT button
AUTO SYNC button
FREEZE button
PICTURE MODE button
MAGNIFY buttons
34
Operating with the Remote Control (Continued)
Press
MAGNIFY
on the remote
control.
• Enlarges the image.
• Pressing
• Pressing
or
MAGNIFY enlarges
or reduces the projected image.
Note
´1 ´2 ´3 ´4
Press
.
Press
.
• You can change the location of the en-
larged image using P, R, O and Q.
Press RETURN on the remote con-
trol to cancel the operation.
trol to cancel the operation.
• The magnification then returns to ×1.
Note
• The selectable magnifications differ
depending on the input signal.
• In the following cases, the image will
return to the normal size (×1).
- When switching the INPUT mode.
- When RETURN has been pressed.
- When the input signal is changed.
- When the input signal resolution and
- When switching the INPUT mode.
- When RETURN has been pressed.
- When the input signal is changed.
- When the input signal resolution and
refresh rate (ver tical frequency)
change.
change.
- When RESIZE has been pressed.
Auto Sync
(Auto Sync Adjustment)
(Auto Sync Adjustment)
Freezing a Moving Image
• When the optimum image cannot be achieved
with Auto Sync adjustment, use the help menu
for manual adjustments. (See page
for manual adjustments. (See page
51
.)
Auto Sync function works when detect-
ing input signal after the projector turns
on.
Press AUTO SYNC to manually adjust
with Auto Sync function.
ing input signal after the projector turns
on.
Press AUTO SYNC to manually adjust
with Auto Sync function.
Press FREEZE.
• The projected image is frozen.
Press FREEZE again to return to
the moving image from the cur-
rently connected device.
the moving image from the cur-
rently connected device.
Note
Selecting the Picture Mode
Press PICTURE MODE.
• When pressing PICTURE MODE, the picture
mode changes in the following order:
STANDARD
PRESENTATION
MOVIE
GAME
sRGB
You can select the appropriate picture
mode for the projected image, such as
movie or video game.
mode for the projected image, such as
movie or video game.
• See page
41
for details on the picture mode.
Note
*
* “sRGB” is displayed only when RGB signal is
input.
Displaying an Enlar ged
Portion of an Image
Portion of an Image
Graphs, tables and other portions of
projected images can be enlarged. This
is helpful when providing more detailed
explanations.
projected images can be enlarged. This
is helpful when providing more detailed
explanations.
1
2
1
2
35
Useful
Features
Using the Remote Control as the Wireless Computer Mouse
When connecting the projector and the computer with a USB cable, you can use
the remote control as the computer mouse.
If the computer is placed too far away from the projector to be connected via the
USB cable, the remote receiver (optional, AN-MR2) makes it possible to operate
the projector with the remote control. For details, see the operation manual of
the receiver.
the remote control as the computer mouse.
If the computer is placed too far away from the projector to be connected via the
USB cable, the remote receiver (optional, AN-MR2) makes it possible to operate
the projector with the remote control. For details, see the operation manual of
the receiver.
Connecting with a USB cable
or
Remote receiver
(optional, AN-MR2)
(optional, AN-MR2)
To USB terminal
USB cable
(commercially available or available as
Sharp service part QCNWGA014WJPZ)
(commercially available or available as
Sharp service part QCNWGA014WJPZ)
To USB terminal
Computer
MOUSE/Adjustment
buttons ('/"/\/|)
buttons ('/"/\/|)
R-CLICK button
L-CLICK button
PAGE UP/
PAGE DOWN buttons
PAGE DOWN buttons
The mouse pointer can be oper-
ated in the following way after it
is connected.
ated in the following way after it
is connected.
■ When moving the cursor
Press MOUSE/Adjustment buttons (P/R/O/Q).
■ When left-clicking
Press L-CLICK.
■ When right-clicking
Press R-CLICK.
■ When your computer supports only a
one-click mouse (such as Macintosh)
Press L-CLICK or R-CLICK.
L-CLICK and R-CLICK have common function.
L-CLICK and R-CLICK have common function.
■ When using [Page Up] or [Page Down]
• This function only works with the Microsoft
®
Windows
®
OS and Mac OS
®
. However, this function
does not work with the following operation systems that do not support USB.
• Versions earlier than Windows
®
95
• Versions earlier than Windows
®
NT4.0
• Versions earlier than Mac OS
®
8.5
• You cannot use this function when displaying the menu screen.
• Confirm that the computer recognizes the USB connection.
• Confirm that the computer recognizes the USB connection.
Note
Same as the [Page Up] and [Page Down] keys on a computer keyboard.
Press PAGE UP or PAGE DOWN.
Press PAGE UP or PAGE DOWN.
36
The following shows the items that can be set in the projector.
Menu Items
Picture Mode
Contrast
0
0
0
0
Bright
Color
Tint
0
Sharp
Standard
SEL./ADJ.
ENTER
END
Picture
SCR
PRJ
Net.
Help
0
0
Red
Blue
Picture Mode
CLR Temp
BrilliantColor
TM
C.M.S. Setting
C.M.S.
Standard
SEL./ADJ.
ENTER
END
Picture
SCR
PRJ
Net.
Help
Progressive
Lamp Setting
0
1
On
3D Progressive
Bright
Reset
PAGE 2
Main menu
Sub menu
Picture
Page
41
Page
41
Page
42
Page
42
Page
42
Page
42
Page
42
Page
43
Page
43
+30
-30
Contrast
+30
-30
+30
-30
+30
-30
1
-1
2
0
+30
-30
+30
-30
+30
-30
Tint
Color
Sharp
Bright
Progressive
Lamp Setting
Reset
2D Progressive
3D Progressive
Film Mode
3D Progressive
Film Mode
CLR Temp
BrilliantColor™
C.M.S. Setting [On/Off]
C.M.S.
Standard
Presentation
Movie
Game
sRGB*1
Presentation
Movie
Game
sRGB*1
Picture Mode
*2
*2
*2
Red
Blue
*2
Bright
Eco + Quiet
Eco + Quiet
C.M.S.-Hue
C.M.S.-Saturation
C.M.S.-Value
Page
42
Page
42
Page
42
Reset
+30
-30
R
+30
-30
+30
-30
+30
-30
+30
-30
+30
-30
C
G
B
Y
M
Reset
*
1
Items when inputting RGB signal through
COMPUTER or DVI.
*
2
Items when inputting component signal through
COMPUTER or DVI, or when selecting S-VIDEO or
VIDEO.
VIDEO.
PAGE 1
“Picture” menu
“C.M.S.”
SEL./ADJ.
ENTER
END
C. M. S. - Hue
0
0
0
0
C. M. S. - Saturation
C. M. S. - Value
0
0
R
Y
G
C
B
M
C. M. S.
Reset
Reset
Click on the first or last page to see other XG-F315X (serv.man12) service manuals if exist.