Sharp XG-C60X (serv.man10) User Manual / Operation Manual ▷ View online
Connections and Setup
-17
Connecting the Power
Cord
Cord
Plug in the supplied power cord into
the AC socket on the rear of the pro-
jector.
the AC socket on the rear of the pro-
jector.
Power code
Supplied
accessory
accessory
Connecting the Projector to a Computer
Connecting to a Computer
Using the RGB Cable
Using the RGB Cable
1
Connect the projector to the
computer using the supplied
RGB cable.
computer using the supplied
RGB cable.
•
Secure the connectors by tightening
the thumbscrews.
the thumbscrews.
2
To input audio signal, connect
the projector to the computer
using the computer audio cable
(commercially available or avail-
able as Sharp service part
QCNWGA038WJPZ).
the projector to the computer
using the computer audio cable
(commercially available or avail-
able as Sharp service part
QCNWGA038WJPZ).
Note
•
See page
93
“Computer Compatibility
Chart” for a list of computer signals com-
patible with the projector. Use with com-
puter signals other than those listed may
cause some of the functions not to work.
patible with the projector. Use with com-
puter signals other than those listed may
cause some of the functions not to work.
•
When connecting the projector to a com-
puter in this way, select “RGB” for “Signal
Type” in the “Picture” menu. See page
puter in this way, select “RGB” for “Signal
Type” in the “Picture” menu. See page
46
.
•
A Macintosh adaptor may be required for
use with some Macintosh computers. Con-
tact your nearest Sharp Authorized
Projector Dealer or Service Center.
use with some Macintosh computers. Con-
tact your nearest Sharp Authorized
Projector Dealer or Service Center.
•
Depending on the computer you are us-
ing, an image may not be projected unless
the signal output setting of the computer is
switched to the external output. Refer to
the computer operation manual for switch-
ing the computer signal output settings.
ing, an image may not be projected unless
the signal output setting of the computer is
switched to the external output. Refer to
the computer operation manual for switch-
ing the computer signal output settings.
Supplied
accessory
accessory
RGB cable
2
Computer audio cable (commercially
available or available as Sharp service
part QCNWGA038WJPZ)
available or available as Sharp service
part QCNWGA038WJPZ)
To RGB output terminal
To audio output terminal
1
RGB cable
Notebook computer
XG-C60X_E_PDF_p15_18.p65
03.8.28, 1:56 PM
17
-18
Connecting the thumbscrew cables
■ Connect the thumbscrew cable making sure that
it fits correctly into the terminal. Then, firmly se-
cure the connectors by tightening the screws on
both sides of the plug.
cure the connectors by tightening the screws on
both sides of the plug.
■ Do not remove the ferrite core attached to the RGB
cable.
Ferrite core
Connecting the Projector to Other Devices
“Plug and Play” function (when connecting to a 15-pin terminal)
■ This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC
compatible computer will communicate their setting requirements, allowing for quick and easy setup.
■ Before using the “Plug and Play” function, be sure to turn on the projector first and the connected
computer last.
Note
•
The DDC “Plug and Play” function of this projector operates only when used in conjunction with a VESA
DDC compatible computer.
DDC compatible computer.
XG-C60X_E_PDF_p15_18.p65
03.8.28, 1:56 PM
18
Connections and Setup
-19
Connecting to Video Equipment
1
S-video cable (commercially available)
Connecting to Video
Equipment Using an
S-video, a Composite
Video or an Audio Cable
Equipment Using an
S-video, a Composite
Video or an Audio Cable
Using an S-video, video, or audio cable, a VCR,
laser disc player or other audio-visual equip-
ment can be connected to INPUT 3, INPUT 4
and AUDIO (L/R) input terminals.
laser disc player or other audio-visual equip-
ment can be connected to INPUT 3, INPUT 4
and AUDIO (L/R) input terminals.
1
Connect the projector to the
video equipment using an S-
video cable or a composite
video cable (both commercially
available).
video equipment using an S-
video cable or a composite
video cable (both commercially
available).
2
Connect the projector to the
video equipment using an au-
dio cable (commercially avail-
able).
video equipment using an au-
dio cable (commercially avail-
able).
Note
•
The INPUT 4 (S-VIDEO) terminal uses a
video signal system in which the picture
is separated into color and luminance sig-
nals to realize a higher-quality image. To
view a higher-quality image, use a com-
mercially available S-video cable to con-
nect the INPUT 4 terminal on the projec-
tor and the S-video output terminal on the
video equipment.
video signal system in which the picture
is separated into color and luminance sig-
nals to realize a higher-quality image. To
view a higher-quality image, use a com-
mercially available S-video cable to con-
nect the INPUT 4 terminal on the projec-
tor and the S-video output terminal on the
video equipment.
To S-video output terminal
To video output terminal
To audio output terminal
2
Audio cable (commercially available)
1
Composite video cable
(commercially available)
(commercially available)
VCR or other audio-visual equipment
XG-C60X_E_PDF_p19_24.p65
03.8.28, 1:56 PM
19
To analog component
output terminal
output terminal
To audio output terminal
2
ø3.5 mm stereo minijack to RCA audio cable
(commercially available)
(commercially available)
1
3 RCA to 15-pin
D-sub cable (sold separately)
D-sub cable (sold separately)
DVD player or
DTV* decoder
DTV* decoder
Connecting to
Component Video
Equipment
Component Video
Equipment
Use a 3 RCA to 15-pin D-sub cable when con-
necting to the INPUT 1 or 2 terminal, compo-
nent video equipment such as DVD players
and DTV* decoders.
necting to the INPUT 1 or 2 terminal, compo-
nent video equipment such as DVD players
and DTV* decoders.
*DTV is the umbrella term used to describe
the new digital television system in the United
States.
the new digital television system in the United
States.
1
Connect the projector to the
video equipment using the 3
RCA to 15-pin D-sub cable
(sold separately).
video equipment using the 3
RCA to 15-pin D-sub cable
(sold separately).
2
Connect the projector to the
video equipment using a ø3.5
mm stereo minijack to RCA au-
dio cable (commercially avail-
able).
video equipment using a ø3.5
mm stereo minijack to RCA au-
dio cable (commercially avail-
able).
Note
•
When connecting the projector to the
video equipment in this way, select “Com-
ponent” for “Signal Type” in the “Picture”
menu. See page
video equipment in this way, select “Com-
ponent” for “Signal Type” in the “Picture”
menu. See page
46
.
•
A ø3.5 mm stereo minijack to RCA audio
cable (commercially available) is required
for audio input.
cable (commercially available) is required
for audio input.
-20
Connecting the Projector to Other Devices
Optional
cable
cable
3RCA to 15-pin D-sub cable
AN-C3CP
(9'10" (3.0 m))
AN-C3CP
(9'10" (3.0 m))
XG-C60X_E_PDF_p19_24.p65
03.9.5, 10:08 AM
20
Click on the first or last page to see other XG-C60X (serv.man10) service manuals if exist.