XG-C55X (serv.man4). Specification — Sharp Projector Service Manual (repair manual)

Model
XG-C55X (serv.man4)
Pages
1 Few pages! See other manuals at the bottom of the first or last page.
Size
60.29 KB
Type
PDF
Document
Service Manual
Brand
Device
Projector / Specification
File
xg-c55x-sm4.pdf
Date

View Sharp XG-C55X (serv.man4) Service Manual online

2
XG-C55X
Specifications
LCD Projector
XG-C55X
NTSC 3.58/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAM/
DTV480I/DTV480P/DTV540P/DTV580I/DTV580P/DTV720P/DTV1035I/DTV1080I
LCD panel × 3, RGB optical shutter method
Panel size: 0.99" (25.1 mm) (15 [H] × 20 [W] mm)
No. of dots: 786,432 dots (1024 [H] × 768 [V])
1—1.27 × zoom lens, F1.7—2.2, f = 36.5—46.3 mm
DC 300 W lamp
15-pin mini D-sub connector
Y: 1.0 Vp-p, sync negative, 75 Ω terminated
P
B
: 0.7 Vp-p, 75 Ω terminated
P
R
: 0.7 Vp-p, 75 Ω terminated
520 TV lines (S-VIDEO)
15-pin mini D-sub connector
RGB separate/sync on green type analog input: 0—0.7 Vp-p, positive, 75 Ω terminated
HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
VERTICAL SYNC. SIGNAL: Same as above
RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 Ω
terminated
4-pin Mini DIN connector
Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated
C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated
9-pin mini DIN connector
12—162 MHz
43—200 Hz*
15—126 kHz
φ 3.5 mm minijack: AUDIO, 0.5 Vrms, more than 47 kΩ (stereo)
3.0 W (monaural)
4 cm × 7 cm
AC 100—240 V
4.0 A
50/60 Hz
400 W (Standard mode)/325 W (Low power mode)
About 0.8 W (When "Mntr.out/RS232" is set to "OFF")
1,500 BTU/hour
41°F to 104°F (+5°C to +40°C)
—4°F to 140°F (—20°C to +60°C)
Plastic
38 kHz
15
3
/
8
" × 3 
7
/
8
" × 11 
9
/
16
" (390 (W) × 99.0 (H) × 294 (D) mm) (main body only)
15
1
/
2
" × 4 
7
/
16
" × 11 
5
/
8
" (393 (W) × 114.0 (H) × 303.2 (D) mm) (including adjustment foot
and projecting parts)
11.3 lbs. (5.1 kg)
Product type
Model
Video system
Display method
LCD panel
Standard lens
Projection lamp
Component input signal
(INPUT1/2)
Horizontal resolution
Computer RGB input signal
(INPUT 1/2)
Video input signal
(INPUT 3)
S-video input signal
(INPUT 4)
Computer control signal (RS-232C)
Pixel clock
Vertical frequency
Horizontal frequency
Audio input signal
Audio output
Speaker system
Rated voltage
Input current
Rated frequency
Power consumption (normal)
Power consumption (standby)
Heat dissipation
Operating temperature
Storage temperature
Cabinet
I/R carrier frequency
Dimensions (approx.)
Weight (approx.)
Supplied accessories
Replacement parts
This SHARP projector uses a LCD (Liquid Crystal Display)
panel. This very sophisticated panel contains 786,432 pix-
els (× RGB) TFTs (Thin Film Transistors). As with any high
technology electronic equipment such as large screen TVs,
video systems and video cameras, there are certain ac-
ceptable tolerances that the equipment must conform to.
This unit has some inactive pixels within acceptable toler-
ances which may result in inactive dots on the picture
screen. This will not affect the picture quality or the life ex-
pectancy of the unit.
* Temporary noise may be visible with vertical frequencies above 100Hz if OSD functions are activated.
Specifications are subject to change without notice.
Remote control, Remote Mouse Receiver, Two R-6 batteries, Power cord for U.S., 
Canada etc. (11’ 10", 3.6 m), Power cord for Europe, except U.K. (6’, 1.8 m), Power cord 
for U.K., Hong Kong and Singapore (6’, 1.8 m), Power cord for Australia, New Zealand 
and Oceania (6’, 1.8 m), RGB cable (9’ 10", 3 m), DIN-D-sub RS-232C adaptor (6 
45
/
64
", 
15 cm), USB cable (3’ 3", 1 m), Extra air filter, Lens cap (attached), Projector manual and 
technical reference CD-ROM, Sharp Advanced Presentation Software CD-ROM, 
Operation manual, Quick reference label
Lamp unit (Lamp/cage module) (BQC-XGC55X//1), Remote control (RRMCGA176WJSA), 
Remote Mouse Receiver (RUNTKA061WJZZ), Two R-6 batteries ("AA" size, UM/SUM-3, 
HP-7, or similar), Power cord for U.S., Canada etc. (QACCDA010WJPZ), Power cord for 
Europe, except U.K. (QACCVA011WJPZ), Power cord for U.K., Hong Kong and Singapore 
(QACCBA012WJPZ), Power cord for Australia, NewZealand and Oceania 
(QACCLA014WJPZ), RGB cable (QCNWGA012WJPZ), DIN-D-sub RS-232C adaptor 
(QCNWGA015WJPZ), USB cable (QCNWG0007CEPZ), Air filter (PFILDA005WJZZ), Lens 
cap (PCAPHA003WJSA), Projector manual and technical reference CD-ROM 
(UDSKAA035WJZZ), Sharp Advanced Presentation Software CD-ROM 
(UDSKAA036WJZZ), Operation manual (TINS-A812WJZZ)
2
XG-C55X
Specifications
LCD Projector
XG-C55X
NTSC 3.58/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAM/
DTV480I/DTV480P/DTV540P/DTV580I/DTV580P/DTV720P/DTV1035I/DTV1080I
LCD panel × 3, RGB optical shutter method
Panel size: 0.99" (25.1 mm) (15 [H] × 20 [W] mm)
No. of dots: 786,432 dots (1024 [H] × 768 [V])
1—1.27 × zoom lens, F1.7—2.2, f = 36.5—46.3 mm
DC 300 W lamp
15-pin mini D-sub connector
Y: 1.0 Vp-p, sync negative, 75 Ω terminated
P
B
: 0.7 Vp-p, 75 Ω terminated
P
R
: 0.7 Vp-p, 75 Ω terminated
520 TV lines (S-VIDEO)
15-pin mini D-sub connector
RGB separate/sync on green type analog input: 0—0.7 Vp-p, positive, 75 Ω terminated
HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
VERTICAL SYNC. SIGNAL: Same as above
RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 Ω
terminated
4-pin Mini DIN connector
Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated
C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated
9-pin mini DIN connector
12—162 MHz
43—200 Hz*
15—126 kHz
φ 3.5 mm minijack: AUDIO, 0.5 Vrms, more than 47 kΩ (stereo)
3.0 W (monaural)
4 cm × 7 cm
AC 100—240 V
4.0 A
50/60 Hz
400 W (Standard mode)/325 W (Low power mode)
About 0.8 W (When "Mntr.out/RS232" is set to "OFF")
1,500 BTU/hour
41°F to 104°F (+5°C to +40°C)
—4°F to 140°F (—20°C to +60°C)
Plastic
38 kHz
15
3
/
8
" × 3 
7
/
8
" × 11 
9
/
16
" (390 (W) × 99.0 (H) × 294 (D) mm) (main body only)
15
1
/
2
" × 4 
7
/
16
" × 11 
5
/
8
" (393 (W) × 114.0 (H) × 303.2 (D) mm) (including adjustment foot
and projecting parts)
11.3 lbs. (5.1 kg)
Product type
Model
Video system
Display method
LCD panel
Standard lens
Projection lamp
Component input signal
(INPUT1/2)
Horizontal resolution
Computer RGB input signal
(INPUT 1/2)
Video input signal
(INPUT 3)
S-video input signal
(INPUT 4)
Computer control signal (RS-232C)
Pixel clock
Vertical frequency
Horizontal frequency
Audio input signal
Audio output
Speaker system
Rated voltage
Input current
Rated frequency
Power consumption (normal)
Power consumption (standby)
Heat dissipation
Operating temperature
Storage temperature
Cabinet
I/R carrier frequency
Dimensions (approx.)
Weight (approx.)
Supplied accessories
Replacement parts
This SHARP projector uses a LCD (Liquid Crystal Display)
panel. This very sophisticated panel contains 786,432 pix-
els (× RGB) TFTs (Thin Film Transistors). As with any high
technology electronic equipment such as large screen TVs,
video systems and video cameras, there are certain ac-
ceptable tolerances that the equipment must conform to.
This unit has some inactive pixels within acceptable toler-
ances which may result in inactive dots on the picture
screen. This will not affect the picture quality or the life ex-
pectancy of the unit.
* Temporary noise may be visible with vertical frequencies above 100Hz if OSD functions are activated.
Specifications are subject to change without notice.
Remote control, Remote Mouse Receiver, Two R-6 batteries, Power cord for U.S., 
Canada etc. (11’ 10", 3.6 m), Power cord for Europe, except U.K. (6’, 1.8 m), Power cord 
for U.K., Hong Kong and Singapore (6’, 1.8 m), Power cord for Australia, New Zealand 
and Oceania (6’, 1.8 m), RGB cable (9’ 10", 3 m), DIN-D-sub RS-232C adaptor (6 
45
/
64
", 
15 cm), USB cable (3’ 3", 1 m), Extra air filter, Lens cap (attached), Projector manual and 
technical reference CD-ROM, Sharp Advanced Presentation Software CD-ROM, 
Operation manual, Quick reference label
Lamp unit (Lamp/cage module) (BQC-XGC55X//1), Remote control (RRMCGA176WJSA), 
Remote Mouse Receiver (RUNTKA061WJZZ), Two R-6 batteries ("AA" size, UM/SUM-3, 
HP-7, or similar), Power cord for U.S., Canada etc. (QACCDA010WJPZ), Power cord for 
Europe, except U.K. (QACCVA011WJPZ), Power cord for U.K., Hong Kong and Singapore 
(QACCBA012WJPZ), Power cord for Australia, NewZealand and Oceania 
(QACCLA014WJPZ), RGB cable (QCNWGA012WJPZ), DIN-D-sub RS-232C adaptor 
(QCNWGA015WJPZ), USB cable (QCNWG0007CEPZ), Air filter (PFILDA005WJZZ), Lens 
cap (PCAPHA003WJSA), Projector manual and technical reference CD-ROM 
(UDSKAA035WJZZ), Sharp Advanced Presentation Software CD-ROM 
(UDSKAA036WJZZ), Operation manual (TINS-A812WJZZ)
2
XG-C55X
Specifications
LCD Projector
XG-C55X
NTSC 3.58/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAM/
DTV480I/DTV480P/DTV540P/DTV580I/DTV580P/DTV720P/DTV1035I/DTV1080I
LCD panel × 3, RGB optical shutter method
Panel size: 0.99" (25.1 mm) (15 [H] × 20 [W] mm)
No. of dots: 786,432 dots (1024 [H] × 768 [V])
1—1.27 × zoom lens, F1.7—2.2, f = 36.5—46.3 mm
DC 300 W lamp
15-pin mini D-sub connector
Y: 1.0 Vp-p, sync negative, 75 Ω terminated
P
B
: 0.7 Vp-p, 75 Ω terminated
P
R
: 0.7 Vp-p, 75 Ω terminated
520 TV lines (S-VIDEO)
15-pin mini D-sub connector
RGB separate/sync on green type analog input: 0—0.7 Vp-p, positive, 75 Ω terminated
HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
VERTICAL SYNC. SIGNAL: Same as above
RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 Ω
terminated
4-pin Mini DIN connector
Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated
C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated
9-pin mini DIN connector
12—162 MHz
43—200 Hz*
15—126 kHz
φ 3.5 mm minijack: AUDIO, 0.5 Vrms, more than 47 kΩ (stereo)
3.0 W (monaural)
4 cm × 7 cm
AC 100—240 V
4.0 A
50/60 Hz
400 W (Standard mode)/325 W (Low power mode)
About 0.8 W (When "Mntr.out/RS232" is set to "OFF")
1,500 BTU/hour
41°F to 104°F (+5°C to +40°C)
—4°F to 140°F (—20°C to +60°C)
Plastic
38 kHz
15
3
/
8
" × 3 
7
/
8
" × 11 
9
/
16
" (390 (W) × 99.0 (H) × 294 (D) mm) (main body only)
15
1
/
2
" × 4 
7
/
16
" × 11 
5
/
8
" (393 (W) × 114.0 (H) × 303.2 (D) mm) (including adjustment foot
and projecting parts)
11.3 lbs. (5.1 kg)
Product type
Model
Video system
Display method
LCD panel
Standard lens
Projection lamp
Component input signal
(INPUT1/2)
Horizontal resolution
Computer RGB input signal
(INPUT 1/2)
Video input signal
(INPUT 3)
S-video input signal
(INPUT 4)
Computer control signal (RS-232C)
Pixel clock
Vertical frequency
Horizontal frequency
Audio input signal
Audio output
Speaker system
Rated voltage
Input current
Rated frequency
Power consumption (normal)
Power consumption (standby)
Heat dissipation
Operating temperature
Storage temperature
Cabinet
I/R carrier frequency
Dimensions (approx.)
Weight (approx.)
Supplied accessories
Replacement parts
This SHARP projector uses a LCD (Liquid Crystal Display)
panel. This very sophisticated panel contains 786,432 pix-
els (× RGB) TFTs (Thin Film Transistors). As with any high
technology electronic equipment such as large screen TVs,
video systems and video cameras, there are certain ac-
ceptable tolerances that the equipment must conform to.
This unit has some inactive pixels within acceptable toler-
ances which may result in inactive dots on the picture
screen. This will not affect the picture quality or the life ex-
pectancy of the unit.
* Temporary noise may be visible with vertical frequencies above 100Hz if OSD functions are activated.
Specifications are subject to change without notice.
Remote control, Remote Mouse Receiver, Two R-6 batteries, Power cord for U.S., 
Canada etc. (11’ 10", 3.6 m), Power cord for Europe, except U.K. (6’, 1.8 m), Power cord 
for U.K., Hong Kong and Singapore (6’, 1.8 m), Power cord for Australia, New Zealand 
and Oceania (6’, 1.8 m), RGB cable (9’ 10", 3 m), DIN-D-sub RS-232C adaptor (6 
45
/
64
", 
15 cm), USB cable (3’ 3", 1 m), Extra air filter, Lens cap (attached), Projector manual and 
technical reference CD-ROM, Sharp Advanced Presentation Software CD-ROM, 
Operation manual, Quick reference label
Lamp unit (Lamp/cage module) (BQC-XGC55X//1), Remote control (RRMCGA176WJSA), 
Remote Mouse Receiver (RUNTKA061WJZZ), Two R-6 batteries ("AA" size, UM/SUM-3, 
HP-7, or similar), Power cord for U.S., Canada etc. (QACCDA010WJPZ), Power cord for 
Europe, except U.K. (QACCVA011WJPZ), Power cord for U.K., Hong Kong and Singapore 
(QACCBA012WJPZ), Power cord for Australia, NewZealand and Oceania 
(QACCLA014WJPZ), RGB cable (QCNWGA012WJPZ), DIN-D-sub RS-232C adaptor 
(QCNWGA015WJPZ), USB cable (QCNWG0007CEPZ), Air filter (PFILDA005WJZZ), Lens 
cap (PCAPHA003WJSA), Projector manual and technical reference CD-ROM 
(UDSKAA035WJZZ), Sharp Advanced Presentation Software CD-ROM 
(UDSKAA036WJZZ), Operation manual (TINS-A812WJZZ)
2
XG-C55X
Specifications
LCD Projector
XG-C55X
NTSC 3.58/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAM/
DTV480I/DTV480P/DTV540P/DTV580I/DTV580P/DTV720P/DTV1035I/DTV1080I
LCD panel × 3, RGB optical shutter method
Panel size: 0.99" (25.1 mm) (15 [H] × 20 [W] mm)
No. of dots: 786,432 dots (1024 [H] × 768 [V])
1—1.27 × zoom lens, F1.7—2.2, f = 36.5—46.3 mm
DC 300 W lamp
15-pin mini D-sub connector
Y: 1.0 Vp-p, sync negative, 75 Ω terminated
P
B
: 0.7 Vp-p, 75 Ω terminated
P
R
: 0.7 Vp-p, 75 Ω terminated
520 TV lines (S-VIDEO)
15-pin mini D-sub connector
RGB separate/sync on green type analog input: 0—0.7 Vp-p, positive, 75 Ω terminated
HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
VERTICAL SYNC. SIGNAL: Same as above
RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 Ω
terminated
4-pin Mini DIN connector
Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated
C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated
9-pin mini DIN connector
12—162 MHz
43—200 Hz*
15—126 kHz
φ 3.5 mm minijack: AUDIO, 0.5 Vrms, more than 47 kΩ (stereo)
3.0 W (monaural)
4 cm × 7 cm
AC 100—240 V
4.0 A
50/60 Hz
400 W (Standard mode)/325 W (Low power mode)
About 0.8 W (When "Mntr.out/RS232" is set to "OFF")
1,500 BTU/hour
41°F to 104°F (+5°C to +40°C)
—4°F to 140°F (—20°C to +60°C)
Plastic
38 kHz
15
3
/
8
" × 3 
7
/
8
" × 11 
9
/
16
" (390 (W) × 99.0 (H) × 294 (D) mm) (main body only)
15
1
/
2
" × 4 
7
/
16
" × 11 
5
/
8
" (393 (W) × 114.0 (H) × 303.2 (D) mm) (including adjustment foot
and projecting parts)
11.3 lbs. (5.1 kg)
Product type
Model
Video system
Display method
LCD panel
Standard lens
Projection lamp
Component input signal
(INPUT1/2)
Horizontal resolution
Computer RGB input signal
(INPUT 1/2)
Video input signal
(INPUT 3)
S-video input signal
(INPUT 4)
Computer control signal (RS-232C)
Pixel clock
Vertical frequency
Horizontal frequency
Audio input signal
Audio output
Speaker system
Rated voltage
Input current
Rated frequency
Power consumption (normal)
Power consumption (standby)
Heat dissipation
Operating temperature
Storage temperature
Cabinet
I/R carrier frequency
Dimensions (approx.)
Weight (approx.)
Supplied accessories
Replacement parts
This SHARP projector uses a LCD (Liquid Crystal Display)
panel. This very sophisticated panel contains 786,432 pix-
els (× RGB) TFTs (Thin Film Transistors). As with any high
technology electronic equipment such as large screen TVs,
video systems and video cameras, there are certain ac-
ceptable tolerances that the equipment must conform to.
This unit has some inactive pixels within acceptable toler-
ances which may result in inactive dots on the picture
screen. This will not affect the picture quality or the life ex-
pectancy of the unit.
* Temporary noise may be visible with vertical frequencies above 100Hz if OSD functions are activated.
Specifications are subject to change without notice.
Remote control, Remote Mouse Receiver, Two R-6 batteries, Power cord for U.S., 
Canada etc. (11’ 10", 3.6 m), Power cord for Europe, except U.K. (6’, 1.8 m), Power cord 
for U.K., Hong Kong and Singapore (6’, 1.8 m), Power cord for Australia, New Zealand 
and Oceania (6’, 1.8 m), RGB cable (9’ 10", 3 m), DIN-D-sub RS-232C adaptor (6 
45
/
64
", 
15 cm), USB cable (3’ 3", 1 m), Extra air filter, Lens cap (attached), Projector manual and 
technical reference CD-ROM, Sharp Advanced Presentation Software CD-ROM, 
Operation manual, Quick reference label
Lamp unit (Lamp/cage module) (BQC-XGC55X//1), Remote control (RRMCGA176WJSA), 
Remote Mouse Receiver (RUNTKA061WJZZ), Two R-6 batteries ("AA" size, UM/SUM-3, 
HP-7, or similar), Power cord for U.S., Canada etc. (QACCDA010WJPZ), Power cord for 
Europe, except U.K. (QACCVA011WJPZ), Power cord for U.K., Hong Kong and Singapore 
(QACCBA012WJPZ), Power cord for Australia, NewZealand and Oceania 
(QACCLA014WJPZ), RGB cable (QCNWGA012WJPZ), DIN-D-sub RS-232C adaptor 
(QCNWGA015WJPZ), USB cable (QCNWG0007CEPZ), Air filter (PFILDA005WJZZ), Lens 
cap (PCAPHA003WJSA), Projector manual and technical reference CD-ROM 
(UDSKAA035WJZZ), Sharp Advanced Presentation Software CD-ROM 
(UDSKAA036WJZZ), Operation manual (TINS-A812WJZZ)
2
XG-C55X
Specifications
LCD Projector
XG-C55X
NTSC 3.58/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAM/
DTV480I/DTV480P/DTV540P/DTV580I/DTV580P/DTV720P/DTV1035I/DTV1080I
LCD panel × 3, RGB optical shutter method
Panel size: 0.99" (25.1 mm) (15 [H] × 20 [W] mm)
No. of dots: 786,432 dots (1024 [H] × 768 [V])
1—1.27 × zoom lens, F1.7—2.2, f = 36.5—46.3 mm
DC 300 W lamp
15-pin mini D-sub connector
Y: 1.0 Vp-p, sync negative, 75 Ω terminated
P
B
: 0.7 Vp-p, 75 Ω terminated
P
R
: 0.7 Vp-p, 75 Ω terminated
520 TV lines (S-VIDEO)
15-pin mini D-sub connector
RGB separate/sync on green type analog input: 0—0.7 Vp-p, positive, 75 Ω terminated
HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
VERTICAL SYNC. SIGNAL: Same as above
RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 Ω
terminated
4-pin Mini DIN connector
Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated
C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated
9-pin mini DIN connector
12—162 MHz
43—200 Hz*
15—126 kHz
φ 3.5 mm minijack: AUDIO, 0.5 Vrms, more than 47 kΩ (stereo)
3.0 W (monaural)
4 cm × 7 cm
AC 100—240 V
4.0 A
50/60 Hz
400 W (Standard mode)/325 W (Low power mode)
About 0.8 W (When "Mntr.out/RS232" is set to "OFF")
1,500 BTU/hour
41°F to 104°F (+5°C to +40°C)
—4°F to 140°F (—20°C to +60°C)
Plastic
38 kHz
15
3
/
8
" × 3 
7
/
8
" × 11 
9
/
16
" (390 (W) × 99.0 (H) × 294 (D) mm) (main body only)
15
1
/
2
" × 4 
7
/
16
" × 11 
5
/
8
" (393 (W) × 114.0 (H) × 303.2 (D) mm) (including adjustment foot
and projecting parts)
11.3 lbs. (5.1 kg)
Product type
Model
Video system
Display method
LCD panel
Standard lens
Projection lamp
Component input signal
(INPUT1/2)
Horizontal resolution
Computer RGB input signal
(INPUT 1/2)
Video input signal
(INPUT 3)
S-video input signal
(INPUT 4)
Computer control signal (RS-232C)
Pixel clock
Vertical frequency
Horizontal frequency
Audio input signal
Audio output
Speaker system
Rated voltage
Input current
Rated frequency
Power consumption (normal)
Power consumption (standby)
Heat dissipation
Operating temperature
Storage temperature
Cabinet
I/R carrier frequency
Dimensions (approx.)
Weight (approx.)
Supplied accessories
Replacement parts
This SHARP projector uses a LCD (Liquid Crystal Display)
panel. This very sophisticated panel contains 786,432 pix-
els (× RGB) TFTs (Thin Film Transistors). As with any high
technology electronic equipment such as large screen TVs,
video systems and video cameras, there are certain ac-
ceptable tolerances that the equipment must conform to.
This unit has some inactive pixels within acceptable toler-
ances which may result in inactive dots on the picture
screen. This will not affect the picture quality or the life ex-
pectancy of the unit.
* Temporary noise may be visible with vertical frequencies above 100Hz if OSD functions are activated.
Specifications are subject to change without notice.
Remote control, Remote Mouse Receiver, Two R-6 batteries, Power cord for U.S., 
Canada etc. (11’ 10", 3.6 m), Power cord for Europe, except U.K. (6’, 1.8 m), Power cord 
for U.K., Hong Kong and Singapore (6’, 1.8 m), Power cord for Australia, New Zealand 
and Oceania (6’, 1.8 m), RGB cable (9’ 10", 3 m), DIN-D-sub RS-232C adaptor (6 
45
/
64
", 
15 cm), USB cable (3’ 3", 1 m), Extra air filter, Lens cap (attached), Projector manual and 
technical reference CD-ROM, Sharp Advanced Presentation Software CD-ROM, 
Operation manual, Quick reference label
Lamp unit (Lamp/cage module) (BQC-XGC55X//1), Remote control (RRMCGA176WJSA), 
Remote Mouse Receiver (RUNTKA061WJZZ), Two R-6 batteries ("AA" size, UM/SUM-3, 
HP-7, or similar), Power cord for U.S., Canada etc. (QACCDA010WJPZ), Power cord for 
Europe, except U.K. (QACCVA011WJPZ), Power cord for U.K., Hong Kong and Singapore 
(QACCBA012WJPZ), Power cord for Australia, NewZealand and Oceania 
(QACCLA014WJPZ), RGB cable (QCNWGA012WJPZ), DIN-D-sub RS-232C adaptor 
(QCNWGA015WJPZ), USB cable (QCNWG0007CEPZ), Air filter (PFILDA005WJZZ), Lens 
cap (PCAPHA003WJSA), Projector manual and technical reference CD-ROM 
(UDSKAA035WJZZ), Sharp Advanced Presentation Software CD-ROM 
(UDSKAA036WJZZ), Operation manual (TINS-A812WJZZ)

Download Sharp XG-C55X (serv.man4) Service Manual (Repair Manual)

Here you can view online or download Sharp XG-C55X (serv.man4) Service Manual in pdf. This Service Manual can help you recover, restore, fix, disassemble and repair Sharp XG-C55X (serv.man4) Projector. Information contained in Sharp XG-C55X (serv.man4) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).