Sharp XG-C50XE Handy Guide ▷ View online
Maintenance Procedure
Version 1.5
Issue 04/2006
Issue 04/2006
16
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
4. Clean the air filter.
•
Clean the dust off the air filter and cover with a vacuum
cleaner extension hose.
cleaner extension hose.
5. Replace the air filter.
•
Place the air filter underneath the tabs on the filter
cover.
cover.
6. Replace the filter cover.
•
Slide the filter cover in the direction of the arrow to close
it.
it.
Note
•
Be sure the filter cover is securely installed. The power will not turn on unless it is
correctly installed.
correctly installed.
•
If dust or dirt has collected inside the bottom air filter (not removable), clean the filter with
a vacuum cleaner extension hose.
a vacuum cleaner extension hose.
Options
Version 1.5
Issue 04/2006
Issue 04/2006
17
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
UK Options
Sales Code
Description
AN-C12MZ
Wide Zoom Lens
AN-60KT
Ceiling Mount Bracket
AN-TK201
High Ceiling Installation
AN-TK202
Standard Ceiling Installation
AN-C12MZ
AN-60KT
AN-TK202
AN-TK201
Setting up the Screen
Position the projector perpendicular to the screen with all feet flat and level to achieve an
optimal image.
optimal image.
Note
•
The projector lens should be centred in the middle of the screen. If the horizontal line
passing through the lens centre is not perpendicular to the screen, the image will be
distorted, making viewing difficult.
passing through the lens centre is not perpendicular to the screen, the image will be
distorted, making viewing difficult.
•
For optimal image, position the screen so that it is not in direct sunlight or room light.
Light falling directly on the screen washes out the colours, making viewing difficult. Close
the curtains and dim the lights when setting up the screen in a sunny or bright room.
Light falling directly on the screen washes out the colours, making viewing difficult. Close
the curtains and dim the lights when setting up the screen in a sunny or bright room.
•
A polarising screen cannot be used with this projector.
An optional lens (AN-C12MZ) from Sharp is also available for specialised application. Contact your
local Sharp Authorised Projector Dealer for details on the lens. (Refer to the lens installation manual
when attaching a lens.)
local Sharp Authorised Projector Dealer for details on the lens. (Refer to the lens installation manual
when attaching a lens.)
Options
Version 1.5
Issue 04/2006
Issue 04/2006
18
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Throw Distance
•
The graph below is for 100 inches (254 cm) screen with 4:3 normal mode.
Standard Set-up (Front Projection)
•
Place the projector at the required distance from the screen
according to the desired picture size.
according to the desired picture size.
Example of Standard Set-up
•
The distance from the screen to the
projector may vary depending on the size of
the screen.
projector may vary depending on the size of
the screen.
•
The default setting can be used, when
placing the projector in front of the screen. If
the projected image is reversed or inverted,
readjust the setting to “Front” in “PRJ
Mode”.
placing the projector in front of the screen. If
the projected image is reversed or inverted,
readjust the setting to “Front” in “PRJ
Mode”.
•
Place the projector so that an imaginary
horizontal line that passes through the
centre of the lens is perpendicular to the
screen.
horizontal line that passes through the
centre of the lens is perpendicular to the
screen.
Options
Version 1.5
Issue 04/2006
Issue 04/2006
19
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Projecting a Reversed/Inverted Image
Projection from behind the screen
•
Place a translucent screen between the projector and the audience.
•
Reverse the image by setting “Rear” in “PRJ Mode”.
Projection using a mirror
•
Place a mirror (normal flat type) in front of the lens.
Note
When using a mirror, be sure to carefully position both the projector and the mirror so the light does not
shine into the eyes of the audience.
shine into the eyes of the audience.
Ceiling-mount set-up
•
It is recommended that you use the optional Sharp ceiling-mount bracket for this
installation. Before mounting the projector, contact your nearest Sharp Authorised
Projector Dealer or Service Centre to obtain the recommended ceiling-mount bracket
(sold separately.) (ANXGCM55 ceiling-mount bracket, its AN-EP101B extension tube and
AN-JT200 universal bracket, adapter for non-level ceiling installation (for U.S.A.), BB-
M20T ceiling adapter, its BBNVHOLDER280, BB-NVHOLDER550, BB-NVHOLDER900
ceiling mount systems (for GERMANY), or AN-60KT ceiling mount bracket, its AN-TK201
and AN-TK202 extension tubes (for countries other than the U.S.A. and GERMANY))
installation. Before mounting the projector, contact your nearest Sharp Authorised
Projector Dealer or Service Centre to obtain the recommended ceiling-mount bracket
(sold separately.) (ANXGCM55 ceiling-mount bracket, its AN-EP101B extension tube and
AN-JT200 universal bracket, adapter for non-level ceiling installation (for U.S.A.), BB-
M20T ceiling adapter, its BBNVHOLDER280, BB-NVHOLDER550, BB-NVHOLDER900
ceiling mount systems (for GERMANY), or AN-60KT ceiling mount bracket, its AN-TK201
and AN-TK202 extension tubes (for countries other than the U.S.A. and GERMANY))
•
Be sure to adjust the position of the projector to match the distance (H) from the lens
centre position to the lower edge of the image, when mounting the projector on the
ceiling.
centre position to the lower edge of the image, when mounting the projector on the
ceiling.
•
Invert the image by setting “Ceiling + Front” in “PRJ Mode”.
Click on the first or last page to see other XG-C50XE service manuals if exist.