DOWNLOAD Sharp XG-C50XE (serv.man46) Service Manual ↓ Size: 81.02 KB | Pages: 7 in PDF or view online for FREE

Model
XG-C50XE (serv.man46)
Pages
7
Size
81.02 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Projector / Update of software
File
xg-c50xe-sm46.pdf
Date

Sharp XG-C50XE (serv.man46) Service Manual / Technical Bulletin ▷ View online

LV068
Sharp Electronics (UK) Ltd., Technical Services Group
10. On the Tera Term Pro, select the “Setup” and then the “Serial port”.
Change the “Baud rate” to “115200” and then click the OK button.
11. On the Tera Term Pro, enter the “START” and then press the ENTER key.
Make sure that the “OK” is returned from the projector and the lamp indicator is
blinking in green.
LV068
Sharp Electronics (UK) Ltd., Technical Services Group
12. On the Tera Term Pro, select the “File” and then the “Send file”.
Check the “Binary” in the Option and then select the
“pj_jffs_C50X_021203_1318.bwh” you decompressed.
Then click “open”.
13. The transfer of data starts if the setting is correct. The “Bytes transferred” will be
counted in the dialog box.
14. Wait for several minutes until the “OK” is displayed two times and then the lamp
indicator is illuminated in red.
If the ERR is displayed, take the steps again from the step 1.
LV068
Sharp Electronics (UK) Ltd., Technical Services Group
Caution: Never turn off the projector or unplug the AC cord while transferring the data. If it
is done, the projector becomes unable to turn the power on.
In case of this, recover the projector by taking the following steps.
(1) Remove the top and the back side cabinet of the projector.
(2) Set the switch on the PC board to the “WRITE” side.
(3) Plug the AC cord.
(4) Take the steps again from the step 8.
(5) After transferring the data, set the switch on the PC board to the “NORMAL”
side.
15. Unplug the AC cord.
16. Plug in the AC cord and then call the process mode.
16. From the process menu, select the “SPECIAL”.
Make sure that the “PRG VER” is changed to “1203”.
17. Turn off the projector.
The update is completed.
LV068
Sharp Electronics (UK) Ltd., Technical Services Group
Caution: Never turn off the projector or unplug the AC cord while transferring the data. If it
is done, the projector becomes unable to turn the power on.
In case of this, recover the projector by taking the following steps.
(1) Remove the top and the back side cabinet of the projector.
(2) Set the switch on the PC board to the “WRITE” side.
(3) Plug the AC cord.
(4) Take the steps again from the step 8.
(5) After transferring the data, set the switch on the PC board to the “NORMAL”
side.
15. Unplug the AC cord.
16. Plug in the AC cord and then call the process mode.
16. From the process menu, select the “SPECIAL”.
Make sure that the “PRG VER” is changed to “1203”.
17. Turn off the projector.
The update is completed.
Page of 7
Display

Sharp XG-C50XE (serv.man46) Service Manual / Technical Bulletin ▷ Download