DOWNLOAD Sharp XG-C50XE (serv.man39) Service Manual ↓ Size: 166.78 KB | Pages: 5 in PDF or view online for FREE

Model
XG-C50XE (serv.man39)
Pages
5 Few pages! See other manuals at the bottom of the first or last page.
Size
166.78 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Projector / Sound is output for a moment at maximum volume level when the projector is turned ON
File
xg-c50xe-sm39.pdf
Date
PREV: Sharp XG-C50XE (serv.man38) Driver / Update

Sharp XG-C50XE (serv.man39) Service Manual / Technical Bulletin ▷ View online

LV-097
Sharp Electronics (UK) Ltd., Technical Services Group
13. The transfer of data will begin if the settings is correct.
The Bytes transferred will be counted in the dialog box.
14. Wait for several minutes until the OK is displayed two times and then the lamp indicator will be illuminated in
red. If ERR is displayed, take the steps again from step 1.
Caution:
Never turn off the projector or unplug the AC cord while transferring the data. If it is done,
the projector becomes unable to turn the power on.
In case of this, recover the projector by taking the following steps.
(1) Remove the top and the back side cabinet of the projector.
(2) Set the switch on the PC board to the WRITE side.
(3) Plug the AC cord.
(4) Take the steps again from the step 8.
(5) After transferring the data, set the switch on the PC board to the NORMAL side.
15. Unplug the AC cord.
16. Then plug the AC cord again and call the process mode.
17. Entering the process menu, make sure the software is changed to 040528.
18. Turn off the projector.
Update is complete.
LV-097
Sharp Electronics (UK) Ltd., Technical Services Group
13. The transfer of data will begin if the settings is correct.
The Bytes transferred will be counted in the dialog box.
14. Wait for several minutes until the OK is displayed two times and then the lamp indicator will be illuminated in
red. If ERR is displayed, take the steps again from step 1.
Caution:
Never turn off the projector or unplug the AC cord while transferring the data. If it is done,
the projector becomes unable to turn the power on.
In case of this, recover the projector by taking the following steps.
(1) Remove the top and the back side cabinet of the projector.
(2) Set the switch on the PC board to the WRITE side.
(3) Plug the AC cord.
(4) Take the steps again from the step 8.
(5) After transferring the data, set the switch on the PC board to the NORMAL side.
15. Unplug the AC cord.
16. Then plug the AC cord again and call the process mode.
17. Entering the process menu, make sure the software is changed to 040528.
18. Turn off the projector.
Update is complete.
LV-097
Sharp Electronics (UK) Ltd., Technical Services Group
13. The transfer of data will begin if the settings is correct.
The Bytes transferred will be counted in the dialog box.
14. Wait for several minutes until the OK is displayed two times and then the lamp indicator will be illuminated in
red. If ERR is displayed, take the steps again from step 1.
Caution:
Never turn off the projector or unplug the AC cord while transferring the data. If it is done,
the projector becomes unable to turn the power on.
In case of this, recover the projector by taking the following steps.
(1) Remove the top and the back side cabinet of the projector.
(2) Set the switch on the PC board to the WRITE side.
(3) Plug the AC cord.
(4) Take the steps again from the step 8.
(5) After transferring the data, set the switch on the PC board to the NORMAL side.
15. Unplug the AC cord.
16. Then plug the AC cord again and call the process mode.
17. Entering the process menu, make sure the software is changed to 040528.
18. Turn off the projector.
Update is complete.
LV-097
Sharp Electronics (UK) Ltd., Technical Services Group
13. The transfer of data will begin if the settings is correct.
The Bytes transferred will be counted in the dialog box.
14. Wait for several minutes until the OK is displayed two times and then the lamp indicator will be illuminated in
red. If ERR is displayed, take the steps again from step 1.
Caution:
Never turn off the projector or unplug the AC cord while transferring the data. If it is done,
the projector becomes unable to turn the power on.
In case of this, recover the projector by taking the following steps.
(1) Remove the top and the back side cabinet of the projector.
(2) Set the switch on the PC board to the WRITE side.
(3) Plug the AC cord.
(4) Take the steps again from the step 8.
(5) After transferring the data, set the switch on the PC board to the NORMAL side.
15. Unplug the AC cord.
16. Then plug the AC cord again and call the process mode.
17. Entering the process menu, make sure the software is changed to 040528.
18. Turn off the projector.
Update is complete.
Page of 5
Display

Sharp XG-C50XE (serv.man39) Service Manual / Technical Bulletin ▷ Download

Found More:

XG-C50XE (serv.man39) Service Manuals

Preview DownloadPagesSize
XG-C50XE (serv.man13) Block diagram Service Manual 1 171.59 KB
XG-C50XE (serv.man24) Complete service manual Service Manual 127 11.62 MB
XG-C50XE (serv.man23) Printed wiring board assemblies Service Manual 10 3.14 MB
XG-C50XE (serv.man22) Schematic diagram - PC I F unit Service Manual 7 1.93 MB
XG-C50XE (serv.man21) Schematic diagram - AC inlet power unit Service Manual 1 326.04 KB
XG-C50XE (serv.man20) Schematic diagram - Fan unit Service Manual 1 175.68 KB
XG-C50XE (serv.man19) Schematic diagram - Key unit Service Manual 1 106.66 KB
XG-C50XE (serv.man18) Schematic diagram - Output unit Service Manual 8 1.61 MB
XG-C50XE (serv.man17) Schematic diagram - Input unit Service Manual 2 364.8 KB
XG-C50XE (serv.man16) Schematic diagram - RC receiver unit Service Manual 1 32.73 KB
XG-C50XE (serv.man15) Description of schematic diagram Service Manual 1 11.2 KB
XG-C50XE (serv.man14) Overall wiring diagram Service Manual 1 161.65 KB
XG-C50XE (serv.man12) Chassis layout Service Manual 1 80.97 KB
XG-C50XE (serv.man11) Troubleshooting Service Manual 19 36.8 KB
XG-C50XE (serv.man10) Electrical adjustment Service Manual 9 26.77 KB
XG-C50XE (serv.man9) The optical unit outline Service Manual 4 71.57 KB
XG-C50XE (serv.man8) Resetting the total lamp timer Service Manual 1 194.79 KB
XG-C50XE (serv.man7) Removing of major parts Service Manual 2 256.69 KB
XG-C50XE (serv.man6) Dimensions Service Manual 1 162.36 KB
XG-C50XE (serv.man5) Operations Service Manual 4 338.05 KB
XG-C50XE (serv.man4) Important servicing notes Service Manual 5 41.69 KB
XG-C50XE (serv.man3) Contents Service Manual 1 82.69 KB
XG-C50XE (serv.man28) Cover, notes, introduction User Manual / Operation Manual 18 1.64 MB
XG-C50XE (serv.man31) Appendix User Manual / Operation Manual 24 1.55 MB
XG-C50XE (serv.man29) Basic operation User Manual / Operation Manual 18 1.4 MB
XG-C50XE (serv.man30) Easy to use functions User Manual / Operation Manual 28 1.1 MB
XG-C50XE (serv.man27) Lamp Installation User Manual / Operation Manual 106 9.53 MB
XG-C50XE (serv.man32) Complete User Manual / Operation Manual 106 8.18 MB
XG-C50XE (serv.man26) Packing of set Service Manual / Parts Guide 3 13.79 KB
XG-C50XE (serv.man25) Parts list (Inc. Exploded views) Service Manual / Parts Guide 22 1.05 MB
XG-C50XE (serv.man2) Specifications Service Manual / Specification 1 9.02 KB
XG-C50XE (serv.man40) Software upgade Service Manual / Technical Bulletin 6 86.86 KB
XG-C50XE (serv.man41) Change of part notification (Lens Cap) Service Manual / Technical Bulletin 1 6.58 KB
XG-C50XE (serv.man42) Additional PBS filter Service Manual / Technical Bulletin 2 303.84 KB
XG-C50XE (serv.man43) Project locks up when turned on (power LED blinks red). Boot loader update. Service Manual / Technical Bulletin 2 11.25 KB
XG-C50XE (serv.man44) Loss of brightness Service Manual / Technical Bulletin 1 12.58 KB
XG-C50XE (serv.man45) Change of parts (Ref. No. FB381, 382, 383) Service Manual / Technical Bulletin 1 62.24 KB
XG-C50XE (serv.man46) Update of software Service Manual / Technical Bulletin 7 81.02 KB
XG-C50XE (serv.man33) New sofware version 040528. See bulletin 008 Driver / Update 741.91 KB
XG-C50XE (serv.man34) Software for bulletin 007 Driver / Update 1.31 MB
XG-C50XE (serv.man35) SAPS English Manual Driver / Update 103 1.85 MB
XG-C50XE (serv.man36) SAPS PRO 1-6 software Driver / Update 9.97 MB
XG-C50XE (serv.man37) Boot loader update (see bulletin 004) Driver / Update 490.73 KB
XG-C50XE (serv.man38) Updated software (See technical bulletin 001) Driver / Update 736.62 KB
XG-C50XE Version 1.5 Handy Guide 56 1.09 MB

RANDOM: