DOWNLOAD Sharp XG-C50XE (serv.man39) Service Manual ↓ Size: 166.78 KB | Pages: 5 in PDF or view online for FREE

Model
XG-C50XE (serv.man39)
Pages
5 Few pages! See other manuals at the bottom of the first or last page.
Size
166.78 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Projector / Sound is output for a moment at maximum volume level when the projector is turned ON
File
xg-c50xe-sm39.pdf
Date

Sharp XG-C50XE (serv.man39) Service Manual / Technical Bulletin ▷ View online

LV-097
Sharp Electronics (UK) Ltd., Technical Services Group
Software upgrade procedure
Preparation:
1. Downloaded the Tera Term Pro from Internet.
http://hp.vector.co.jp/authors/VA002416/teraterm.html
2. Decompress ttremp23.zip and then run setup.exe in that folder.
3. The Language list box appears in the dialog box.
Select English and then click Continue.
4. The NOTE: ~ message appears in the dialog box.
Click Continue.
5. The Destination Path dialog box appears.
Click Continue.
It is not necessary to change the default destination path(c:\PROGRAM FILES\TTERMPRO).
6. The Complete dialog box appears.
Click OK.
Updating software:
1. Turn ON the projector.
2. Connect between the RS-232C-IN port of projector and the RS-232C port of PC by using DIN-D-sub
RS-232C adapter and RS-232C serial control cable (cross type).
3. Run Tera Term Pro (communication program).
3-1. The New connection dialog box appears, select the Serial and then the suitable COM port.
Then click OK.
3-2. On the Tera Term Pro, select the Setup and then the Terminal.
Change Receive to CR+LF and then click Local echo to check.
Then click OK.
LV-097
Sharp Electronics (UK) Ltd., Technical Services Group
3-3. Make sure that the ERR is returned from the projector when you pressed ENTER key.
4. Call the process mode. Press the operation keys in this order:
POWER ON / ADJ UP / ADJ DOWN / ADJ UP / ADJ DOWN / ENTER / ENTER / MENU
5. Select the SPECIAL on the process menu and then press ENTER key.
6. Select the IPL2 on the sub menu and then press ENTER key.
The lamp will turns off and the projector goes into the software writing mode.
7. Once unplug the AC cord and then plug it in again.
Note: Be sure to unplug the AC cord once and plug it in again, at this step.
8. On the Tera Term Pro, enter the RATE1152 and then press ENTER key.
9. On the Tera Term Pro, select the Setup and then the Terminal.
Click the Local echo to uncheck and then click the OK button.
LV-097
Sharp Electronics (UK) Ltd., Technical Services Group
10. On the Tera Term Pro, select the Setup and then the Serial port.
Change the Baud rate to 115200 and then click the OK button.
11. On the Tera Term Pro, enter the START and then press ENTER key.
Make sure that the OK is returned from the projector and the lamp indicator is blinking in green.
12. On the Tera Term Pro, select the File then select the Send file.
Put a check to the Binary in the Option and select the software file for update.
Then click Open.
LV-097
Sharp Electronics (UK) Ltd., Technical Services Group
13. The transfer of data will begin if the settings is correct.
The Bytes transferred will be counted in the dialog box.
14. Wait for several minutes until the OK is displayed two times and then the lamp indicator will be illuminated in
red. If ERR is displayed, take the steps again from step 1.
Caution:
Never turn off the projector or unplug the AC cord while transferring the data. If it is done,
the projector becomes unable to turn the power on.
In case of this, recover the projector by taking the following steps.
(1) Remove the top and the back side cabinet of the projector.
(2) Set the switch on the PC board to the WRITE side.
(3) Plug the AC cord.
(4) Take the steps again from the step 8.
(5) After transferring the data, set the switch on the PC board to the NORMAL side.
15. Unplug the AC cord.
16. Then plug the AC cord again and call the process mode.
17. Entering the process menu, make sure the software is changed to 040528.
18. Turn off the projector.
Update is complete.
Page of 5
Display

Sharp XG-C50XE (serv.man39) Service Manual / Technical Bulletin ▷ Download

  • DOWNLOAD Sharp XG-C50XE (serv.man39) Service Manual ↓ Size: 166.78 KB | Pages: 5 in PDF or view online for FREE
  • Here you can View online or download the Service Manual / Technical Bulletin for the Sharp XG-C50XE (serv.man39) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp XG-C50XE (serv.man39) Projector. Information contained in Sharp XG-C50XE (serv.man39) Service Manual / Technical Bulletin (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.