Sharp XG-C50XE (serv.man32) User Manual / Operation Manual ▷ View online
-2
WARNING:
The cooling fan in this projector continues to run for about 90 seconds after the projector is turned off. During
normal operation, when turning the power off always use the power (OFF) button on the projector or on the remote
control. Ensure the cooling fan has stopped before disconnecting the power cord.
DURING NORMAL OPERATION, NEVER TURN THE PROJECTOR OFF BY DISCONNECTING THE POWER CORD.
FAILURE TO OBSERVE THIS WILL RESULT IN PREMATURE LAMP FAILURE.
normal operation, when turning the power off always use the power (OFF) button on the projector or on the remote
control. Ensure the cooling fan has stopped before disconnecting the power cord.
DURING NORMAL OPERATION, NEVER TURN THE PROJECTOR OFF BY DISCONNECTING THE POWER CORD.
FAILURE TO OBSERVE THIS WILL RESULT IN PREMATURE LAMP FAILURE.
Caution Concerning the Lamp Replacement
See “Replacing the Lamp” on page
85
.
PRODUCT DISPOSAL
This projector utilizes tin-lead solder, and a pressurized lamp containing a small amount of mercury. Disposal of
these materials may be regulated due to environmental considerations. For disposal or recycling information,
please contact your local authorities or, if you are located in the United States of America, the Electronic Industries
Alliance: www.eiae.org .
these materials may be regulated due to environmental considerations. For disposal or recycling information,
please contact your local authorities or, if you are located in the United States of America, the Electronic Industries
Alliance: www.eiae.org .
PRECAUTIONS A OBSERVER LORS DU
REMPLACEMENT DE LA LAMPE.
REMPLACEMENT DE LA LAMPE.
DEBRANCHER LE CORDON D’ALIMENTATION AVANT DE RETIRER LES VIS.
L’INTERIEUR DU BOITIER ETANT EXTREMEMENT CHAUD, ATTENDRE 1 HEURE
AVANT DE PROCEDER AU REMPLACEMENT DE LA LAMPE.
NE REMPLACER QUE PAR UNE LAMPE SHARP DE TYPE BQC-XGC50X//1.
RAYONS ULTRAVIOLETS : PEUVENT ENDOMMAGER LES YEUX.
ETEINDRE LA LAMPE AVANT DE PROCEDER A L’ENTRETIEN.
LAMPE A MOYENNE PRESSION : RISQUE D’EXPLOSION. DANGER POTENTIEL
DE PARTICULES DE VERRE EN CAS D’ECLATEMENT DE LA LAMPE.
A MANIPULER AVEC PRECAUTION, SE REPORTER AU MODE D’EMPLOI.
L’INTERIEUR DU BOITIER ETANT EXTREMEMENT CHAUD, ATTENDRE 1 HEURE
AVANT DE PROCEDER AU REMPLACEMENT DE LA LAMPE.
NE REMPLACER QUE PAR UNE LAMPE SHARP DE TYPE BQC-XGC50X//1.
RAYONS ULTRAVIOLETS : PEUVENT ENDOMMAGER LES YEUX.
ETEINDRE LA LAMPE AVANT DE PROCEDER A L’ENTRETIEN.
LAMPE A MOYENNE PRESSION : RISQUE D’EXPLOSION. DANGER POTENTIEL
DE PARTICULES DE VERRE EN CAS D’ECLATEMENT DE LA LAMPE.
A MANIPULER AVEC PRECAUTION, SE REPORTER AU MODE D’EMPLOI.
BEFORE REMOVING THE SCREW, DISCONNECT POWER CORD.
HOT SURFACE INSIDE. ALLOW 1 HOUR TO COOL BEFORE REPLACING THE LAMP.
REPLACE WITH SAME SHARP LAMP UNIT TYPE BQC-XGC50X//1 ONLY.
UV RADIATION : CAN CAUSE EYE DAMAGE. TURN OFF LAMP BEFORE SERVICING.
MEDIUM PRESSURE LAMP : RISK OF EXPLOSION. POTENTIAL HAZARD OF GLASS
PARTICLES IF LAMP HAS RUPTURED. HANDLE WITH CARE. SEE OPERATION MANUAL.
HOT SURFACE INSIDE. ALLOW 1 HOUR TO COOL BEFORE REPLACING THE LAMP.
REPLACE WITH SAME SHARP LAMP UNIT TYPE BQC-XGC50X//1 ONLY.
UV RADIATION : CAN CAUSE EYE DAMAGE. TURN OFF LAMP BEFORE SERVICING.
MEDIUM PRESSURE LAMP : RISK OF EXPLOSION. POTENTIAL HAZARD OF GLASS
PARTICLES IF LAMP HAS RUPTURED. HANDLE WITH CARE. SEE OPERATION MANUAL.
LAMP REPLACEMENT CAUTION
Intr
oduction
-3
Outstanding Features
1. Ultra High Brightness from a Compact Projector
• AC 250W Lamp
Use AC 250W lamp for excellent color uniformity and ultra high brightness.
• Power Save mode function enables lower noise levels, reduced power
consumption and longer lamp life.
2. Simple & Easy Operation
• User friendly interface with easy to use operation system and connection
areas makes setup a breeze.
Smooth installation and operation using frequently used buttons,
placement of terminals, color schemes as well as combined use of auto
input and search.
Smooth installation and operation using frequently used buttons,
placement of terminals, color schemes as well as combined use of auto
input and search.
• Simple lens replacement
Using an easy access lens cover and a new bayonnet mount configuration, the optional lens can be
easily installed.
easily installed.
3. Superior PC Compatibility
• Compatible with up to 200 Hz vertical refresh rate, Sync on Green and
Composite Sync signals for use with a wide variety of high-end PCs and
Workstations.
Workstations.
• Using
Advanced Intelligent Compression
Technology, computer screens
of UXGA (1,600
# 1,200) resolution can be displayed with minimal distortion.
4. Advanced Computer & Video lntegrated Composer Technology
• Realizes vivid images using the latest image quality circuitry.
• New I/P conversion algorithm enhances the performance of the motion detect I/P
conversion.
Extensive improvements on the jagged edges or slanted
lines in moving images.
lines in moving images.
• Color Management System
Supports sRGB.
Enables individual settings of lightness, chromatic value
and hue for six target colors.
Enables individual settings of lightness, chromatic value
and hue for six target colors.
• Noise Reduction
Allows for a clear image even with noisy source signals.
• New Edge Up-Scaling
Reduces jaggies and flickering when up-scaling edges
of slanted lines, enabling sharper quality images.
of slanted lines, enabling sharper quality images.
5. Anti-theft and Safe Design
• Anti-theft
This function will render the projector useless if a keycode is not entered.
•
Notevision Lock Down
The Notevision Lock Down (roof bolt) is coupled together with a metal-
lic optical mechanism. Thus, even if a strong force is applied, the
Notevision Lock Down prevents insert nut from falling out, and since
the projector can be more rigidly installed than in the past, it is effective
both for preventing theft and in terms of safety.
lic optical mechanism. Thus, even if a strong force is applied, the
Notevision Lock Down prevents insert nut from falling out, and since
the projector can be more rigidly installed than in the past, it is effective
both for preventing theft and in terms of safety.
-4
Contents
Adjusting the Picture ........................................ 46
Adjusting Image Preferences .................................. 46
Selecting the Signal Type ....................................... 46
Progressive Mode .................................................... 47
Selecting the Signal Type ....................................... 46
Progressive Mode .................................................... 47
Adjusting Computer Images ............................ 48
When Auto Sync is OFF ........................................... 48
Saving Adjustment Settings ..................................... 48
Selecting Adjustment Settings ................................ 49
Special Mode Settings ............................................ 49
Checking the Input Signal ....................................... 49
Auto Sync Adjustment ............................................. 50
Auto Sync Display Function ................................... 50
Saving Adjustment Settings ..................................... 48
Selecting Adjustment Settings ................................ 49
Special Mode Settings ............................................ 49
Checking the Input Signal ....................................... 49
Auto Sync Adjustment ............................................. 50
Auto Sync Display Function ................................... 50
Easy to Use Functions
Selecting the Picture Display Mode ................ 52
Displaying a Still Image .................................... 54
Enlarging a Specific Portion of an Image ....... 55
Gamma Correction Function ............................ 56
Displaying Dual Pictures (Pict in Pict) ............ 57
Black Screen Function ..................................... 58
Displaying the Break Timer .............................. 59
Color Management System (C. M. S.) .............. 60
Displaying a Still Image .................................... 54
Enlarging a Specific Portion of an Image ....... 55
Gamma Correction Function ............................ 56
Displaying Dual Pictures (Pict in Pict) ............ 57
Black Screen Function ..................................... 58
Displaying the Break Timer .............................. 59
Color Management System (C. M. S.) .............. 60
Selecting the Color Reproduction Mode ................. 60
Selecting the Target Color ....................................... 60
Setting the Brightness of the Target Color ............... 61
Setting the Chromatic Value of the Target Color ...... 61
Setting the Hue of the Target Color ........................ 61
Resetting User-Defined Color Settings ................... 62
Overview of All Color Settings ................................. 62
Selecting the Target Color ....................................... 60
Setting the Brightness of the Target Color ............... 61
Setting the Chromatic Value of the Target Color ...... 61
Setting the Hue of the Target Color ........................ 61
Resetting User-Defined Color Settings ................... 62
Overview of All Color Settings ................................. 62
Setting the Audio Output Type ......................... 63
Setting on/off the Internal Speaker .................. 63
Auto Search Function ....................................... 64
Video Digital Noise Reduction
Setting on/off the Internal Speaker .................. 63
Auto Search Function ....................................... 64
Video Digital Noise Reduction
(DNR) System .............................................. 65
Setting On-screen Display ............................... 65
Setting the Video System ................................. 66
Saving Projected Images .................................. 67
Setting the Video System ................................. 66
Saving Projected Images .................................. 67
Capturing the Image .............................................. 67
Deleting the Captured Image .................................. 67
Deleting the Captured Image .................................. 67
Setting a Background Image ............................ 68
Selecting a Startup Image ................................ 68
Selecting the Economy Mode .......................... 69
Selecting a Startup Image ................................ 68
Selecting the Economy Mode .......................... 69
Setting the Power Save Mode ................................. 69
Monitor Out/RS-232C Off Function .......................... 69
Automatic Power Off Function ................................. 70
Monitor Out/RS-232C Off Function .......................... 69
Automatic Power Off Function ................................. 70
Displaying the Remaining Lamp Life
(Percentage) ................................................. 70
Reversing/Inverting Projected Images ............ 71
Locking the Operation Buttons
Locking the Operation Buttons
on the Projector ........................................... 71
Setting up the Keylock ............................................ 71
Introduction
Outstanding Features ......................................... 3
Contents ............................................................... 4
IMPORTANT SAFEGUARDS ............................... 6
How to Access the PDF Operation Manuals
How to Access the PDF Operation Manuals
(Windows, Macintosh) ................................... 9
Part Names ........................................................ 10
Projector (Front and Top View) ................................ 10
Projector (Rear View) .............................................. 11
Remote Control (Front View) ................................... 12
Remote Control (Top View) ..................................... 12
Projector (Rear View) .............................................. 11
Remote Control (Front View) ................................... 12
Remote Control (Top View) ..................................... 12
Using the Remote Control ................................ 13
Available Range of the Remote Control ................. 13
Inserting the Batteries ............................................. 13
Inserting the Batteries ............................................. 13
Accessories ....................................................... 14
Connections and Setup
Connecting the Projector to Other Devices .... 16
Before Connecting .................................................. 16
This projector can be connected to: ....................... 16
Connecting the Power Cord ................................... 17
This projector can be connected to: ....................... 16
Connecting the Power Cord ................................... 17
Connecting the Projector to a Computer ............. 18
Connecting to Video Equipment .......................... 20
Connecting to an Amplifier .................................. 22
Controlling the Projector by a Computer ............. 23
Connecting to a Monitor ...................................... 24
Using the Wireless Presentation Function of the
Connecting to Video Equipment .......................... 20
Connecting to an Amplifier .................................. 22
Controlling the Projector by a Computer ............. 23
Connecting to a Monitor ...................................... 24
Using the Wireless Presentation Function of the
Remote Control ............................................. 25
Using as a Wired Remote Control ....................... 26
Setup .................................................................. 27
Setup .................................................................. 27
Using the Adjustment Feet ..................................... 27
Adjusting the Lens .................................................. 28
Setting up the Screen .............................................. 29
Screen Size and Projection Distance ...................... 30
Projecting a Reversed/Inverted Image ................... 32
Adjusting the Lens .................................................. 28
Setting up the Screen .............................................. 29
Screen Size and Projection Distance ...................... 30
Projecting a Reversed/Inverted Image ................... 32
Basic Operation
Setting with the Buttons
Image Projection ............................................... 34
Basic Procedure ...................................................... 34
Selecting the On-screen Display Language ........... 36
Selecting the On-screen Display Language ........... 36
Correcting Trapezoidal Distortion
(Keystone Correction) ................................. 38
Setting with the Menus
Menu Bar Items ................................................. 40
Using the Menu Screen .................................... 42
Using the Menu Screen .................................... 42
Menu Selections (Adjustments) .............................. 42
Menu Selections (Settings) ..................................... 44
Menu Selections (Settings) ..................................... 44
Introduction
-5
Canceling the Keylock Setting ................................ 72
Selecting the Transmission Speed
(RS-232C) ..................................................... 72
Setting up a Password ...................................... 73
Entering the Password ............................................. 73
Changing the Password ......................................... 74
If You Forget Your Password ................................... 74
Changing the Password ......................................... 74
If You Forget Your Password ................................... 74
Setting the Anti-Theft ........................................ 75
Entering the Keycode .............................................. 75
Changing the Keycode ........................................... 76
Changing the Keycode ........................................... 76
Initializing the Settings ..................................... 77
Displaying the Adjustment Settings ................ 78
Displaying the Adjustment Settings ................ 78
Appendix
Maintenance ...................................................... 80
Replacing the Air Filter ..................................... 81
Maintenance Indicators .................................... 83
Regarding the Lamp ......................................... 85
Lamp ...................................................................... 85
Caution Concerning the Lamp ................................ 85
Replacing the Lamp ................................................ 85
Removing and Installing the Lamp Unit ................. 86
Resetting the Lamp Timer ....................................... 87
Caution Concerning the Lamp ................................ 85
Replacing the Lamp ................................................ 85
Removing and Installing the Lamp Unit ................. 86
Resetting the Lamp Timer ....................................... 87
Connecting Pin Assignments .......................... 88
(RS-232C) Specifications and
Command Settings ...................................... 89
Wired Remote Control Terminal
Specifications .............................................. 92
Computer Compatibility Chart ......................... 93
Troubleshooting ................................................ 94
For SHARP Assistance ..................................... 96
Specifications .................................................... 97
Dimensions ........................................................ 98
Glossary ............................................................. 99
Index ................................................................. 100
Click on the first or last page to see other XG-C50XE (serv.man32) service manuals if exist.