DOWNLOAD Sharp XG-C465X (serv.man4) Service Manual ↓ Size: 1.84 MB | Pages: 15 in PDF or view online for FREE

Model
XG-C465X (serv.man4)
Pages
15
Size
1.84 MB
Type
PDF
Document
Service Manual
Brand
Device
Projector / Electrical Adjustment
File
xg-c465x-sm4.pdf
Date
PREV: Sharp XG-C465X (serv.man3) Service Manual

Sharp XG-C465X (serv.man4) Service Manual ▷ View online

XG-C435X/C465X
3 – 11
4. Adjustment mode process menu
27
White balance check
RGB input, sRGB input, component input, 
video input, S-video input
1) Check that there is no disturbance in the white balance using a 
monitor.
28
Vertical stripe level 
check
1) Receive the RGB gray scale signal.
1) It must be better than the vertical stripe boundary sample.
29
Checking of off-timer 
performance
1) Select  OFF in the process mode.
Make sure that the off-timer starts with 5-minute display, counts 
down 1minute for 1second, and turns off when 0minute is dis-
played.
30
Checking of ther-
mistor performance
1) Heat the thermistor with a hair dryer.
1) Make sure the temperature is displayed.
31
Automatic sync opera-
tion
1) Receive the phase checking pattern 
signal.
1) Make sure that Clock, Phase, H-POS and V-POS can be automat-
ically adjusted in the VGA/S-VGA/XGA mode.
32
Monitor out check
1) Input the video and audio signals to the 
COMPUTER1 and COMPUTER2 ter-
minals.
2) Connect another monitor to the monitor 
out terminal.
3) Connect a speaker with a built-in ampli-
fier to the audio out terminal.
1) Check that image selected with the projector is displayed on 
another monitor connected to monitor out terminal and sound is 
heard from the speaker connected to the audio out terminal.
33
RS232C operation 
check
1) Connect the unit and a PC with the 
RS232C cable.
1) Send a command from the PC, and check it functions correctly.
34
USB operation check
1) Connect to a PC with an USB cable.
1) Check that forward/reverse operation is enabled on the PC screen 
using the remote control.
35
LAN operation check
1) Connect to a PC with a LAN cable.
1) Check that communication is possible.
36
Remote control check
1) Check the wired remote operation.
2) Check the remote control operation.
1) Check that the wired remote control terminal is activated.
2) Check the remote control operation.
37
Model name check
1) Send “TNAM 1” and “MNRD 1”h with 
RS232C command.
1) Check that the appropriate model name is displayed correctly.
38
Delivery settings
1) Make the following settings.
No.
Adjustment Item
Adjustment Conditions
Adjustment Procedures
Destination
Process
Remote control
adjustment
adjustment
USA
SS4
Factory setting at 4
Others
SS3
Factory setting at 3
ON ENTER ENTER
PLUS
MINUS
(Adj Right)
(Adj Left)
XG-C435X/C465X
3 – 12
Adjustment mode process menu
Group
Sub Group
Subject
Adjust DTV image
DTV
Contrast
Tint
Color
Sharpness
Bright
B-DRIVE
R-DRIVE
Adjust DVD image
DVD
Contrast
Tint
Color
Sharpness
Bright
B-DRIVE
R-DRIVE
Adjust Video image
VIDEO
Contrast
N-Tint
P-Tint
S-Tint
N-Color
P-Color
S-Color
Sharpness
Bright
B-DRIVE
R-DRIVE
Adjust PC image
AD
R-Bright
G-Bright
B-Bright
R-Contrast
G-Contrast
B-Contrast
Adjust PC image
AD2
R-Bright2
G-Bright2
B-Bright2
R-Contrast2
G-Contrast2
B-Contrast2
Adjust RGB image
OUTPUT1
R1-BLK
R1-GAIN
G1-BLK
G1-GAIN
B1-BLK
B1-GAIN
TGR-BLK
TGR-GAIN
TGG-BLK
TGG-GAIN
TGB-BLK
TGB-GAIN
R-COM
G-COM
B-COM
R-COM2
G-COM2
B-COM2
COM-LEVEL
S-R1-BLK
S-G1-BLK
S-B1-BLK
Adjust Panel
OUTPUT2
LC-SW
LC-HPOS-R
RLV1
RLV1
XG-C435X/C465X
3 – 13
RLV2
RLV3
RLV1
LC-HPOS-G
GLV1
GLV1
GLV2
GLV3
LC-HPOS-B
BLV1
BLV1
BLV2
BLV3
BLV3
Adjust Panel
OUTPUT3
ENBR-DLY
ENBG-DLY
ENBB-DLY
ENBXR-PH
ENBXG-PH
ENBXB-PH
ENBX-WIDTH
DGC-SW
DGCJ-R
DGCJ-G
DGCJ-B
CC
GAMMA
Adjust Panel
OUTPUT4
FPRR-H
FPRR-L
FPRG-H
FPRG-L
FPRB-H
FPRB-L
FPR-ST
FPR-END
Adjust Video image
VIDEO1
N-Contrast
P-Contrast
S-Contrast
Color
NT3.58Delay
NT4.43Delay
PALDelay
SECAMDelay
Adjust Video image
PEDESTAL
R-Bright
G-Bright
B-Bright
R-Contrast
G-Contrast
B-Contrast
Version Check
VERSION
Build
BootCode
Config
RomCode
GUI
LAN
Initial setting
SS
SS2
SS3 EU
SS4 US
SS5 JPN
SS6 CHIN
Sensor check
TEMP
Temp1
Temp2
Temp3
Group
Sub Group
Subject
XG-C435X/C465X
3 – 14
Lamp Timer check
LAMP
Current time
History 1
History 2
History 3
History 4
TOTAL TIME
Process mode
LINE
OFF
LED CHECK
Calibration
K-Sensor
V-Size
Fan-mode
Nfan-Normal
Group
Sub Group
Subject
Page of 15
Display

Click on the first or last page to see other XG-C465X (serv.man4) service manuals if exist.

RANDOM: