XG-C465X (serv.man4). Electrical Adjustment — Sharp Projector Service Manual (repair manual)

Model
XG-C465X (serv.man4)
Pages
15
Size
1.84 MB
Type
PDF
Document
Service Manual
Brand
Device
Projector / Electrical Adjustment
File
xg-c465x-sm4.pdf
Date

View Sharp XG-C465X (serv.man4) Service Manual online

XG-C435X/C465X
3 – 1
XG-C435X
Service Manual
 
CHAPTER 3. 
ELECTRICAL ADJUSTMENT
[1] PW software rewriting procedure
1. Prepare before rewriting.
1. Please prepare one RS232C cross cable and conversion cable. 
Connect the conversion cable to the Projector, and it connects with a RS232C cross cable. 
Connect opposite side to the serial port of personal computer. 
2. Open the filter cover of the bottom cabinet and insert the LEAF SW JIG:PSPAZB245WJKZ.
Projector will be rewriting mode.
If you don’t have LEAF SW JIG, open the top cabinet and select S2701 of main PWB to “WRITE” side.
Projector will be rewriting mode.
LEAF SW JIG:PSPAZB245WJKZ
XG-C435X/C465X
3 – 2
2. How to rewrite the software. 
1. Projector software rewriting will be done with the Flash Up grader. 
2. Unpack the software file. 
3. Double-click on the "FlashUpgrader.exe", so below window will be displayed on PC. 
4. Click on the “Choose” button.
Then, below window will be displayed on PC. 
XG-C435X/C465X
3 – 3
5. Clock on the above position and select the latest software
If you mistook the folder, please select the unpacked folder.
6. There is file named "pwSDK.inf" in this folder.
XG-C435X/C465X
3 – 4
7. Double-click on the "pwSDK.inf". 
Note: 
Options: Continuous Flash Mode; Do not put check point.
                Notify On Completion; Do not put check point.
                Reset Target After download; Put the check point.
 Modes: Put the check point in “Flash”.
8. Click on the “Flash” button. 
Then, below image will be appeared.
Now, preparation is completed.
XG-C435X/C465X
3 – 5
9. Next, connect the AC cord of the projector and software rewriting will start automatically. 
If the gauge is not started, please check the “LEAF SW JIG” or “Write SW”.
Rewriting times are about 3 or 4 minutes.
Do not disconnect the AC cord by at this time. 
Below window is under writing.
And below window will appear after software rewriting is completed.
Please click on “Close” and software rewriting is finished. 
10.Remove the LEAF SW JIG: PSPAZB245WJKZ and attach the filter cover.
Or select S2701 of main PWB to “NORMAL” side and attach the top cabinet.
Projector will be Normal mode (Non-writing mode)

Download Sharp XG-C465X (serv.man4) Service Manual (Repair Manual)

Here you can view online or download Sharp XG-C465X (serv.man4) Service Manual in pdf. This Service Manual can help you recover, restore, fix, disassemble and repair Sharp XG-C465X (serv.man4) Projector. Information contained in Sharp XG-C465X (serv.man4) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).