Sharp XG-C455W (serv.man9) Service Manual ▷ View online
XG-C455W/PG-C355W
1 – 5
Using the Remote Control
Inserting the Batteries
1
Pull down the tab on the cover and
remove the cover towards the di-
rection of the arrow.
remove the cover towards the di-
rection of the arrow.
2
Insert the included batteries.
• Insert the batteries making sure the po-
larities correctly match the
and
marks inside the battery compartment.
3
Insert the lower tab of the cover
into the opening, and lower the
cover until it clicks in place.
into the opening, and lower the
cover until it clicks in place.
Incorrect use of the batteries may cause them to leak or explode. Please follow the precautions below.
Caution
• Danger of explosion if battery is incorrectly replaced. Replace only with alkaline or manganese batteries.
• Insert the batteries making sure the polarities correctly match the
• Insert the batteries making sure the polarities correctly match the
and
marks inside the battery compart-
ment.
• Batteries of different types have different properties, therefore do not mix batteries of different types.
• Do not mix new and old batteries.
• Do not mix new and old batteries.
This may shorten the life of new batteries or may cause old batteries to leak.
• Remove the batteries from the remote control once they have run out, as leaving them in can cause them to leak.
Battery fluid from leaked batteries is harmful to skin, therefore ensure you wipe them first and then remove them
using a cloth.
using a cloth.
• The batteries included with this projector may run down in a short period, depending on how they are kept. Be
sure to replace them as soon as possible with new batteries.
• Remove the batteries from the remote control if you will not be using the remote control for a long time.
• Comply with the rules (ordinance) of each local government when disposing of worn-out batteries.
• Comply with the rules (ordinance) of each local government when disposing of worn-out batteries.
Usable Range
The remote control can be used to control
the projector within the ranges shown in the
illustration.
the projector within the ranges shown in the
illustration.
Note
• The signal from the remote control can be re-
flected off a screen for easy operation. How-
ever, the effective distance of the signal may
differ depending on the screen material.
ever, the effective distance of the signal may
differ depending on the screen material.
When using the remote control:
• Take care not to drop, expose to moisture or
high temperature.
• The remote control may malfunction under a
fluorescent lamp. In this case, move the pro-
jector away from the fluorescent lamp.
jector away from the fluorescent lamp.
Remote control sensor
Remote control
signal transmitters
signal transmitters
Remote control
23' (7 m)
30°
30°
30°
Front View
Rear View
30°
30°
30°
Remote control sensor
23' (7 m)
Remote control
signal transmitters
signal transmitters
Remote control
XG-C455W/PG-C355W
1 – 6
RS-232C Terminal:mini DIN 9-pin female connector
Pin No.
Signal
Name
I/O
Reference
1
Not connected
2
RD
Receive Data
Input
Connected to internal circuit
3
SD
Send Data
Output
Connected to internal circuit
4
Not connected
5
SG
Signal Ground
Connected to internal circuit
6
Not connected
7
RS
Request to Send
Connected to CS in internal circuit
8
CS
Clear to Send
Connected to RS in internal circuit
9
Not connected
RS-232C Terminal: D-sub 9-pin male connector of the DIN-D-sub RS-232C adaptor
Pin No.
Signal
Name
I/O
Reference
1
Not connected
2
RD
Receive Data
Input
Connected to internal circuit
3
SD
Send Data
Output
Connected to internal circuit
4
Not connected
5
SG
Signal Ground
Connected to internal circuit
6
Not connected
7
RS
Request to Send
Connected to CS in internal circuit
8
CS
Clear to Send
Connected to RS in internal circuit
9
Not connected
RS-232C Cable recommended connection: D-sub 9-pin female connector
Pin No.
Signal
Pin No.
Signal
1
CD
1
CD
2
RD
2
RD
3
SD
3
SD
4
ER
4
ER
5
SG
5
SG
6
DR
6
DR
7
RS
7
RS
8
CS
8
CS
9
CI
9
CI
Note
Depending on the controlling device used, it may be necessary to connect Pin 4 and Pin 6 on the controlling
device (e.g. computer).
device (e.g. computer).
LAN Terminal : LAN (RJ-45)
Pin No.
Signal
Pin No.
Signal
1
TX+
5
2
TX-
6
RX-
3
RX+
7
4
8
8
9
6
5
1
2
4
3
7
1
6
11
5
15
10
COMPUTER-RGB/COMPONENT INPUT 1, 2 and COMPUTER-RGB/COMPONENT OUTPUT Terminals:
mini D-sub 15-pin female connector
mini D-sub 15-pin female connector
COMPUTER-RGB Input/Output
1. Video input (red)
2. Video input (green/sync on green)
3. Video input (blue)
4. Not connected
5. Not connected
6. Earth (red)
7. Earth (green/sync on green)
8. Earth (blue)
9. Not connected
2. Video input (green/sync on green)
3. Video input (blue)
4. Not connected
5. Not connected
6. Earth (red)
7. Earth (green/sync on green)
8. Earth (blue)
9. Not connected
10. GND
11. Not connected
12. Bi-directional data
13. Horizontal sync signal: TTL level
14. Vertical sync signal: TTL level
15. Data clock
11. Not connected
12. Bi-directional data
13. Horizontal sync signal: TTL level
14. Vertical sync signal: TTL level
15. Data clock
Component Input/Output
1. P
R
(C
R
)
2. Y
3. P
3. P
B
(C
B
)
4. Not connected
5. Not connected
6. Earth (P
5. Not connected
6. Earth (P
R
)
7. Earth (Y)
8. Earth (P
8. Earth (P
B
)
9. Not connected
10. Not connected
11. Not connected
12. Not connected
13. Not connected
14. Not connected
15. Not connected
11. Not connected
12. Not connected
13. Not connected
14. Not connected
15. Not connected
1
5
6
9
5
1
9
6
8 ... 1
Projector
Pin No.
4
5
6
5
6
Computer
Pin No.
4
5
6
5
6
Connecting Pin Assignments
XG-C455W/PG-C355W
1 – 7
17
24
1
9
16
8
Pin No.
Signal
1
T.M.D.S. Data 2-
2
T.M.D.S. Data 2+
3
T.M.D.S. Data 2 Shield
4
Not connected
5
Not connected
6
DDC Clock
7
DDC Data
8
Not connected
9
T.M.D.S. Data 1-
10
T.M.D.S. Data 1+
11
T.M.D.S. Data 1 Shield
12
Not connected
DVI-D Terminal:24 pin connector
Pin No.
Signal
13
Not connected
14
+5 V Power
15
Ground
16
Hot Plug Detect
17
T.M.D.S. Data 0-
18
T.M.D.S. Data 0+
19
T.M.D.S. Data 0 Shield
20
Not connected
21
Not connected
22
T.M.D.S. Clock Shield
23
T.M.D.S. Clock+
24
T.M.D.S. Clock-
XG-C455W/PG-C355W
1 – 8
[3] Dimensions
Units: inches (mm)
Side View
Side View
Top View
Rear View
Front View
Bottom View
11
1
/
64
(279.5)
17
/
64
(6.5)
1
/
4
(6)
12
27
/
32
(326)
3
31
/
64
(88.5)
2
15
/
16
(74.5)
5
53
/
64
(148)
5
53
/
64
(148)
4
(101.5)
1
31
/
32
(50)
3
1
/
64
(76.5)
63
/
64
(25)
2
61
/
64
(75)
5
25
/
32
(146.5)
9
9
/
32
(235.5)
10
37
/
64
(268.5)
1
5
/
64
(27.25)
2
29
/
32
(73.5)
Click on the first or last page to see other XG-C455W (serv.man9) service manuals if exist.