DOWNLOAD Sharp XG-C455W (serv.man6) Service Manual ↓ Size: 1.45 MB | Pages: 15 in PDF or view online for FREE

XG-C455W/PG-C355W

4 – 11

3) Execute teaching of the standard set under the following conditions.

Condition setting for PG-C355W/XG-C455W

3. Color shading correction (adjustment)

Condition setting for C355W/C455W

Correction method

Select the model name created in the section (2) and perform color shading correction/adjustment.

If the set has significantly different optical characteristics from the standard or shows color shading or line dropouts, execute teaching and adjust it
using the correction factor.

    Model name:

Enter the model name newly.

    Resolution:

1280 x 800

    Binary interval:

2 ms

    Correction value, X direction:

33

    Correction value, Y direction:

25

    Number of correction bits:

8

    Adjustment value, minimum:

-48

    Adjustment value, center:

0

    Adjustment value, maximum:

48

    Number of teachings:

5

    Teaching interval:

24

    Brightness variation direction by adjustment value: Brightness UP by increasing the adjustment value (checked)
    Adjustment point:

3D (checked)
TG system (selected)
Tone 0 (checked)
Tone 1 (checked)
Other tones are not checked.

    Adjustment point (Test pattern display level)
    Tone 0:

11%

    Tone 1:

40%

    Adjustment color:

Adjustment with RGB (checked)

    Correction setting
    Tone 7:

Default

    Tone 6:

Default

    Tone 5:

Default

    Tone 4:

Default

    Tone 3:

Default

    Tone 2:

Default

    Tone 1:

Correction by correction factor

    Tone 0:

Correction by correction factor

14

Component offset 
adjustment

1) Select the following.

Group: AD
Adjustment item: C-R-OS
                            C-B-OS

1) Check the fixed values.

C-R-OS: 260
C-B-OS: 260

15

Video bright/contrast 
adjustment

1) Select the following.

Group: VIDEO
Adjustment item: V-CONT
                            V-BRIGHT

1) Check the fixed values.

V-CONT: 134
V-BRIGHT: 68

16

Video tint adjustment

1) Select the following.

Group: VIDEO
Adjustment item: V-HUE

1) Check the fixed value.

V-HUE: 128

17

Video color saturation 
adjustment

1) Select the following.

Group: VIDEO
Adjustment item: V-COLOR

1) Check the fixed value.

V-COLOR: 139

18

sRGB check

sRGB input.

1) Check that the chromaticity values are in spec. 

X=322

±5

Y=341

±5

19

Vertical stripe level 
check

1) Receive the RGB gray scale signal.

1) It must be better than the vertical stripe boundary sample.

20

Checking of off-timer 
performance

1) Select the following.

Group: LINE
Adjustment item: OFF

1) Make sure that the off-timer starts with 5-minute display, counts 

down 1minute for 1second, and turns off when 0minute is dis-
played.

XG-C455W/PG-C355W

4 – 12

1) Disabling procedure

With System-Lock input window onscreen, press the “MENU”, “ENTER”, “ENTER”, “MENU”, “ENTER”, “ENTER” and “MENU” keys, in this order,
on the remote controller.

 

21

Checking of ther-
mistor performance

1) Heat the thermistor with a hair dryer.

1) Make sure the temperature warning is displayed.

22

Automatic sync opera-
tion

1) Receive the phase checking pattern 

signal.

1) Make sure that Clock, Phase, H-POS and V-POS can be automat-

ically adjusted in the VGA/S-VGA/XGA mode.

23

DVI input operation 
check

1) Send the video signal to the DVI termi-

nal.

1) Check that an image is properly projected

24

Monitor out check

1) Input the video and audio signals to the 

COMPUTER1 and COMPUTER2 ter-
minals.

2) Connect another monitor to the monitor 

out terminal.

3) Connect a speaker with a built-in ampli-

fier to the audio out terminal.

1) Check that image selected with the projector is displayed on 

another monitor connected to monitor out terminal and sound is 
heard from the speaker connected to the audio out terminal.

25

RS232C operation 
check

1) Connect the unit and a PC with the 

RS232C cable.

1) Send a command from the PC, and check it functions correctly.

26

USB operation check

1) Connect to a PC with an USB cable.

1) Check that forward/reverse operation is enabled on the PC screen 

using the remote control.

27

LAN operation check

1) Connect to a PC with a LAN cable.

1) Check that communication is possible.

28

Remote control check

1) Check the wired remote operation.
2) Check the remote control operation.

1) Check that the wired remote control terminal is activated.
2) Check the remote control operation.

29

Model name check

1) Send “TNAM 1” and “MNRD 1”h with 

RS232C command.

1) Check that the appropriate model name is displayed correctly.

30

Delivery settings

1) Make the following settings.

Destination

Process

Remote control

adjustment

adjustment

USA

SS4

Factory setting at 4

Others

SS3

Factory setting at 3

ENTER

ENTER RIGHT LEFT ENTER

ENTER MENU

XG-C455W/PG-C355W

4 – 13

Adjustment mode process menu

AD

R-Bright
G-Bright
B-Bright

R-Contrast
G-Contrast
B-Contrast

C-R-OS
C-B-OS

VIDEO

V-CONT

V-BRIGHT

V-COLOR

V-HUE

V-R-OS
V-G-OS
V-B-OS

OFFSET-MODE

OFFSET-CONT

OFFSET-BRI

OUTPUT1

R1-BLK

R1-GAIN

G1-BLK

G1-GAIN

B1-BLK

B1-GAIN

TGR-BLK

TGR-GAIN

TGG-BLK

TGG-GAIN

TGB-BLK

TGB-GAIN

R-COM
G-COM
B-COM

R-COM2
G-COM2
B-COM2

COM-LEVEL

S-R1-BLK
S-G1-BLK
S-B1-BLK

OUTPUT2

LC-SW

LC-HPOS-R

RLV0
RLV1
RLV2
RLV3
RLV4

LC-HPOS-G

GLV0
GLV1
GLV2
GLV3
GLV4

LC-HPOS-B

BLV0
BLV1
BLV2
BLV3
BLV4

XG-C455W/PG-C355W

4 – 14

OUTPUT3

ENBR-DLY
ENBG-DLY
ENBB-DLY

ENBXR-PH
ENBXG-PH
ENBXB-PH

ENBX-WIDTH

DGC-SW

DGCJ-R
DGCJ-G
DGCJ-B

CC

GAMMA

OUTPUT4

FRPR-H

FRPR-L

FRPG-H

FRPG-L
FRPB-H

FRPB-L

FRP_ST

FRP_END

REON

INPUT_CSC

OUTPUT_CSC

GAMMA

PICTURE

NR

SCE

WARP

VERSION

MODEL

MAIN

OSD

LOADER

LAN

MODEL

MODEL-SELECT

SS

SS1
SS2

SS3 EU
SS4 US

SS5 JPN

SS6 CHIN

TEMP-FAN

Temp1
Temp2
Temp3

FAN1
FAN2
FAN3
FAN4
FAN5
FAN6

LAMP

Current Time

History1
History2
History3
History4

TOTAL TIME

LINE

OFF

LED CHECK

Calibration

K-Sensor

V-Size